ABSTRACT
M10 CEMENT: SAND/CONCRETE SCREEDS/ GRANOLITHIC SCREEDS/TOPPING
Cement and sand (1:3) screeds; steel trowelled Work to floors; one coat level; to concrete base; screeded; over 300mm wide
25mm thick – – – – m2 8.16 50mm thick – – – – m2 9.66 75mm thick – – – – m2 12.78 100mm thick – – – – m2 15.91
Add to the above for work to falls and crossfalls and to slopes
not exceeding 15° from horizontal – 0.02 0.39 – m2 0.39 over 15° from horizontal – 0.09 1.75 – m2 1.75 water repellent additive incorporated in the mix – 0.02 0.39 3.67 m2 4.06 oil repellent additive incorporated in the mix – 0.07 1.36 3.58 m2 4.94
Fine concrete (1: 4-5) levelling screeds; steel trowlelled Work to floors; one coat; level; to concrete base; over 300mm wide
50mm thick – – – – m2 9.66 75mm thick – – – – m2 12.78
Extra over last for isolation joint to perimeter – – – – m 1.18
Early drying floor screed; RMC Mortars Readyscreed; or other equal and approved; steel trowlelled Work to floors; one coat; level; to concrete base; over 300mm wide
100mm thick – – – – m2 19.00 Extra over last for galvanized chicken wire anticrack reinforcement – – – – m2 0.90
Granolithic paving; cement and granite chippings 5 to dust (1:1:2); steel trowelled Work to floors; one coat; level; laid on concrete while green; bonded; over 300mm wide
25mm thick – – – – m2 21.99 38mm thick – – – – m2 24.48
Work to floors; two coat; laid on hacked concrete with slurry; over 300mm wide
50mm thick – – – – m2 27.07 75mm thick – – – – m2 33.32
Work to landings; one coat; level; laid on concrete while green; bonded; over 300mm wide
25mm thick – – – – m2 32.90 38mm thick – – – – m2 36.72
Work to landings; two coat; laid on hacked concrete with slurry; over 300mm wide
Material £ hours £ £ rate £
Add to the above over 300mm wide for liquid hardening additive incorporated in the mix – 0.04 0.78 0.42 m2 1.20 oil-repellent additive incorporated in the mix – 0.07 1.36 3.58 m2 4.94
25mm work to treads; one coat; to concrete base 225mm wide – 0.83 20.75 8.58 m 29.33 275mm wide – 0.83 20.75 9.60 m 30.35 returned end – 0.17 4.25 – nr 4.25
13mm skirtings; rounded top edge and coved bottom junction; to brickwork or blockwork base
75mm wide on face – 0.51 12.75 0.41 m 13.16 150mm wide on face – 0.69 17.25 7.55 m 24.80 ends; fair – 0.04 1.00 – nr 1.00 angles – 0.06 1.50 – nr 1.50
13mm outer margin to stairs; to follow profile of and with rounded nosing to treads and risers; fair edge and arris at bottom, to concrete base
75mm wide – 0.83 20.75 4.12 m 24.87 angles – 0.06 1.50 – nr 1.50
13mm wall string to stairs; fair edge and arris on top; coved bottom junction with treads and risers; to brickwork or blockwork base
275mm (extreme) wide – 0.74 18.50 7.21 m 25.71 ends – 0.04 1.00 – nr 1.00 angles – 0.06 1.50 – nr 1.50 ramps – 0.07 1.75 – nr 1.75 ramped and wreathed corners – 0.09 2.26 – nr 2.26
13mm outer string to stairs; rounded nosing on top at junction with treads and risers; fair edge and arris at bottom; to concrete base
300mm (extreme) wide – 0.74 18.50 8.92 m 27.42 ends – 0.04 1.00 – nr 1.00 angles – 0.06 1.50 – nr 1.50 ramps – 0.07 1.75 – nr 1.75 ramps and wreathed corners – 0.09 2.26 – nr 2.26
19mm thick skirtings; rounded top edge and coved bottom junction; to brickwork or blockwork base
75mm wide on face – 0.51 12.75 7.55 m 20.30 150mm wide on face – 0.69 17.25 11.66 m 28.91 ends; fair – 0.04 0.78 – nr 0.78 angles – 0.06 1.50 – nr 1.50
19mm riser; one rounded nosing; to concrete base 150mm high; plain – 0.83 20.75 6.52 m 27.27 150mm high; undercut – 0.83 20.75 6.52 m 27.27 180mm high; plain – 0.83 20.75 8.92 m 29.67 180mm high; undercut – 0.83 20.75 8.92 m 29.67
Material £ hours £ £ rate £
M11 MASTIC ASPHALT FLOORING/FLOOR UNDERLAYS
Mastic asphalt flooring to BS 6925 Type F 1076; black 20mm thick; one coat coverings; felt isolating membrane; to concrete base; flat
over 300mm wide – – – – m2 15.73 225mm-300mm wide – – – – m2 29.24 150mm-225mm wide – – – – m2 32.11 not exceeding 150mm wide – – – – m2 39.31
25mm thick; one coat coverings; felt isolating membrane; to concrete base; flat
over 300mm wide – – – – m2 18.27 225mm-300mm wide – – – – m2 31.19 150mm-225mm wide – – – – m2 33.99 not exceeding 150mm wide – – – – m2 41.21
20mm three coat skirtings to brickwork base not exceeding 150mm girth – – – – m 16.07 150mm-225mm girth – – – – m 19.65 225mm-300mm girth – – – – m 23.23
Mastic asphalt flooring; acid-resisting; black 20mm thick; one coat coverings; felt isolating membrane; to concrete base flat
over 300mm wide – – – – m2 18.44 225mm-300mm wide – – – – m2 33.71 150mm-225mm wide – – – – m2 34.82 not exceeding 150mm wide – – – – m2 42.01
25mm thick; one coat coverings; felt isolating membrane; to concrete base; flat
over 300mm wide – – – – m2 21.78 225mm-300mm wide – – – – m2 34.65 150mm-225mm wide – – – – m2 37.51 not exceeding 150mm wide – – – – m2 44.72
20mm thick; three coat skirtings to brickwork base not exceeding 150mm girth – – – – m 16.24 150mm-225mm girth – – – – m 18.93 225mm-300mm girth – – – – m 21.48
Mastic asphalt flooring to BS 6925 Type F 1451; red 20mm thick; one coat coverings; felt isolating membrane; to concrete base; flat
over 300mm wide – – – – m2 25.79 225mm-300mm wide – – – – m2 42.60 150mm-225mm wide – – – – m2 46.02 not exceeding 150mm wide – – – – m2 55.05
20mm thick; three coat skirtings to brickwork base not exceeding 150mm girth – – – – m 20.25 150mm-225mm girth – – – – m 25.79
Material £ hours £ £ rate £
M12 TROWELLED BITUMEN/RESIN/RUBBER LATEX
Latex cement floor screeds; steel trowelled Work to floors; level; to concrete base; over 300mm wide
3mm thick; one coat – – – – m2 3.86 5mm thick; two coats – – – – m2 5.43
Resin flooring; Altro or other equal and approved; steel trowelled Work to floors; level; to concrete base; over 300mm wide
AltroTect clear; up to 3mm thick; two coat – – – – m2 6.36 AltroTect coloured; up to 3mm thick; two coat – – – – m2 6.74 AltroFlow EP 1000; up to 3mm thick; two coat – – – – m2 14.75 AltroFlow EP 2000; up to 3mm thick; two coat – – – – m2 23.49 AltroFlow EP 3000; up to 3mm thick; two coat – – – – m2 30.13 AltroScreed Quartz EP; 4-6mm thick – – – – m2 36.95 Altro SoloSafe; 5-6mm thick – – – – m2 54.12 Altro MultiScreed; 4mm thick – – – – m2 33.21 Altrocrete PU (Polyurethane); 2-9mm thick – – – – m2 31.72
Isocrete K screeds or other equal and approved; steel trowelled Work to floors; level; to concrete base; over 300mm wide
35mm thick; plus polymer bonder coat – – – – m2 11.91 40mm thick – – – – m2 11.00 45mm thick – – – – m2 11.62 50mm thick – – – – m2 12.25
Work to floors; to falls or cross-falls; to concrete base; over 300mm wide
55mm (average) thick – – – – m2 12.87 60mm (average) thick – – – – m2 13.50 65mm (average) thick – – – – m2 14.12 75mm (average) thick – – – – m2 15.37 90mm (average) thick – – – – m2 17.25
Isocrete K screeds; quick drying; or other equal and approved; steel trowelled Work to floors; level or to floors n.e. 15° from the horizontal; to concrete base; over 300mm wide
55mm thick – – – – m2 16.66 75mm thick – – – – m2 20.82
Material £ hours £ £ rate £
M12 TROWELLED BITUMEN/RESIN/RUBBER LATEX – cont
Isocrete pumpable Self Level Plus screeds; or other equal and approved; protected with Corex type polythene; knifed off prior to laying floor finish; flat smooth finish Work to floors; level or to floors n.e. 15° from the horizontal; to concrete base; over 300mm wide
20mm thick – – – – m2 20.30 50mm thick – – – – m2 27.07
Bituminous lightweight insulating roof screeds Bit-Ag or similar roof screed or other equal and approved; to falls or cross-falls; bitumen felt vapour barrier; over 300mm wide
75mm (average) thick – – – – m2 41.37 100mm (average) thick – – – – m2 52.43
M20 PLASTERED/RENDERED/ROUGHCAST COATING
Cement and sand (1:3) beds and backings 10mm thick work to walls; one coat; to brickwork or blockwork base
over 300mm wide – – – – m2 13.51 not exceeding 300mm wide – – – – m 6.76
13mm thick; work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 16.25 not exceeding 300mm wide – – – – m 8.14
15mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 17.51 not exceeding 300mm wide – – – – m 8.77
Cement and sand (1:3); steel trowelled 13mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 14.14 not exceeding 300mm wide – – – – m 7.07
16mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 15.84 not exceeding 300mm wide – – – – m 7.93
19mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 18.32 not exceeding 300mm wide – – – – m 9.16
ADD to above
Material £ hours £ £ rate £
Cement-lime-sand (1:2:9); steel trowelled 19mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 17.77 not exceeding 300mm wide – – – – m 8.89
Cement-lime-sand (1:1:6); steel trowelled 13mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 14.54 not exceeding 300mm wide – – – – m 7.16
Add to the above over 300mm wide for waterproof additive – – – – m2 2.45
19mm thick work to ceilings; three coats; to metal lathing base
over 300mm wide – – – – m2 17.09 not exceeding 300mm wide – – – – m 9.99
Sto External render only system; comprising glassfibre mesh reinforcement embedded in 10mm Sto Levell Cote with Sto Armat Classic Basecoat Render and Stolit K 1.5 Decorative Topcoat Render (white) 15mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 41.10 Extra for
bellcast bead – – – – m 3.91 external angle with PVC mesh angle bead – – – – m 3.61 internal angle with Sto Armor angle – – – – m 3.61 render stop bead – – – – m 3.61
K-Rend render or similar through-colour render system 18mm thick work to walls; two coats; to brickwork or blockwork base; first coat 8mm standard base coat; second coat 10mm K-rend silicone WP/FT
over 300mm wide – – – – m2 52.91
Plaster; first 11mm coat of Thistle Hardwall plaster; second 2mm finishing coat of Thistle Multi Finish plaster; steel trowelled 13mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 11.21 over 300mm wide; in staircase areas or plant rooms – – – – m2 13.47 not exceeding 300mm wide – – – – m 5.96
13mm thick work to isolated brickwork or blockwork columns; two coats
Material £ hours £ £ rate £
M20 PLASTERED/RENDERED/ROUGHCAST COATING – cont
Plaster; first 11mm coat of Thistle Browning plaster; second finishing coat of 2mm Thistle Multi Finish plaster; steel trowelled finish 13mm thick; work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 11.21 over 300mm wide; in staircase areas or plant rooms – – – – m2 13.46 not exceeding 300mm wide – – – – m 5.96
13mm thick work to isolated brickwork or blockwork columns; two coats
over 300mm wide – – – – m2 21.12 not exceeding 300mm wide – – – – m 9.36
Plaster; first 8mm or 11mm coat of Thistle Bonding plaster; second 2mm finishing coat of Thistle Multi Finish plaster; steel trowelled finish 13mm thick work to walls; two coats; to concrete base
over 300mm wide – – – – m2 12.55 over 300mm wide; in staircase areas or plant rooms – – – – m2 14.87 not exceeding 300mm wide – – – – m 5.75
13mm thick work to isolated piers or columns; two coats; to concrete base
over 300mm wide – – – – m2 22.43 not exceeding 300mm wide – – – – m 10.50
10mm thick work to ceilings; two coats; to concrete base
over 300mm wide – – – – m2 10.74 over 300 wide; 3.50m-5.00m high – – – – m2 12.89 over 300mm wide; in staircase areas or plant rooms – – – – m2 14.26 not exceeding 300mm wide – – – – m 6.00
10mm thick work to isolated beams; two coats; to concrete base
over 300mm wide – – – – m2 21.48 over 300mm wide; 3.50m-5.00m high – – – – m2 22.91 not exceeding 300mm wide – – – – m 10.80
Plaster; one coat Snowplast plaster or other equal and approved; steel trowelled 13mm thick work to walls; one coat; to brickwork or blockwork base
over 300mm wide – – – – m2 12.40 over 300mm wide; in staircase areas or plant rooms – – – – m2 14.73
Material £ hours £ £ rate £
13mm thick work to isolated columns; one coat over 300mm wide – – – – m2 15.00 not exceeding 300mm wide – – – – m 7.53
Plaster; first coat of Limelite renovating plaster; finishing coat of Limelite finishing plaster; or other equal and approved; steel trowelled 13mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 17.19 over 300mm wide; in staircase areas or plant rooms – – – – m2 18.87 not exceeding 300mm wide – – – – m 8.60
Dubbing out existing walls with undercoat plaster; average 6mm thick
over 300mm wide – – – – m2 5.16 not exceeding 300mm wide – – – – m 2.61
Dubbing out existing walls with undercoat plaster; average 12mm thick
over 300mm wide – – – – m2 10.31 not exceeding 300mm wide – – – – m 5.16
Plaster; first coat of Thistle X-ray plaster or other equal and approved; finishing coat of Thistle X-ray finishing plaster or other equal and approved; steel trowelled 17mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 55.79 over 300mm wide; in staircase areas or plant rooms – – – – m2 59.94 not exceeding 300mm wide – – – – m 22.31
17mm thick work to isolated columns; two coats over 300mm wide – – – – m2 90.50 not exceeding 300mm wide – – – – m 36.17
Plaster; one coat Thistle projection plaster or other equal and approved; steel trowelled 13mm thick work to walls; one coat; to brickwork or blockwork base
over 300mm wide – – – – m2 11.96 over 300mm wide; in staircase areas or plant rooms – – – – m2 13.68 not exceeding 300mm wide – – – – m 5.97
10mm thick work to isolated columns; one coat over 300mm wide – – – – m2 14.56 not exceeding 300mm wide – – – – m 7.26
Material £ hours £ £ rate £
M20 PLASTERED/RENDERED/ROUGHCAST COATING – cont
Plaster; first 11mm coat of Thistle Bonding plaster; second 2mm finishing coat of Thistle Multi Finish plaster; steel trowelled 13mm thick work to ceilings; three coats to metal lathing base
over 300mm wide – – – – m2 13.03 over 300mm wide; in staircase areas or plant rooms – – – – m2 15.63 not exceeding 300mm wide – – – – m 7.03
13mm thick work to swept soffit of metal lathing arch former
not exceeding 300mm wide – – – – m 9.38 300mm-400mm wide – – – – m 12.54
13mm thick work to vertical face of metal lathing arch former
not exceeding 0.50m2 per side – – – – nr 13.32 0.50m2-1m2 per side – – – – nr 19.98
Cemrend self-coloured render or other equal and approved; one coat; to brickwork or blockwork base 20mm thick work to walls; to brickwork or blockwork base
over 300mm wide – – – – m2 28.62 not exceeding 300mm wide – – – – m 16.70
Tyrolean decorative rendering or similar; 13mm thick first coat of cement-lime-sand (1:1:6); finishing three coats of Cullamix or other equal and approved; applied with approved hand operated machine external To walls; four coats; to brickwork or blockwork base
over 300mm wide – – – – m2 28.59 not exceeding 300mm wide – – – – m 14.27
Drydash (pebbledash) finish of Derbyshire Spar chippings or other equal and approved on and including cement-lime-sand (1:2:9) backing 18mm thick work to walls; two coats; to brickwork or blockwork base
over 300mm wide – – – – m2 24.78 not exceeding 300mm wide – – – – m 12.40
Material £ hours £ £ rate £
Plaster; one coat Thistle board finish or other equal and approved; steel trowelled (prices included within plasterboard rates) 3mm thick work to walls or ceilings; one coat; to plasterboard base
over 300mm wide – – – – m2 5.06 over 300mm wide; in staircase areas or plant rooms – – – – m2 6.07 not exceeding 300mm wide – – – – m 2.02
Plaster; one coat Thistle board finish or other and approved; steel trowelled 3mm work to walls or ceilings; one coat on and including gypsum plasterboard; BS 1230; fixing with nails; 3mm joints filled with plaster and jute scrim cloth; to softwood base; plain grade baseboard or lath with rounded edges 9.50mm thick boards to walls
over 300mm wide – 0.97 13.00 3.11 m2 16.11 not exceeding 300mm wide – 0.37 5.22 0.89 m 6.11
9.50mm thick boards to walls; in staircase areas or plant rooms
over 300mm wide – 1.06 14.27 3.11 m2 17.38 not exceeding 300mm wide – 0.46 6.49 0.89 m 7.38
9.50mm thick boards to isolated columns over 300mm wide – 1.06 14.27 3.11 m2 17.38 not exceeding 300mm wide – 0.56 7.90 0.89 m 8.79
9.50mm thick boards to ceilings over 300mm wide – 0.89 11.87 3.11 m2 14.98 over 300mm wide; 3.50m-5.00m high – 1.03 13.85 3.11 m2 16.96 not exceeding 300mm wide – 0.43 6.07 0.89 m 6.96
9.50mm thick boards to ceilings; in staircase areas or plant rooms
over 300mm wide – 0.98 13.14 3.11 m2 16.25 not exceeding 300mm wide – 0.47 6.63 0.89 m 7.52
9.50mm thick boards to isolated beams over 300mm wide – 1.05 14.13 3.11 m2 17.24 not exceeding 300mm wide – 0.50 7.05 0.89 m 7.94
12.50mm thick boards to walls; in staircase areas or plant rooms
over 300mm wide – 1.12 15.12 3.11 m2 18.23 not exceeding 300mm wide – 0.50 7.05 0.89 m 7.94
12.50mm thick boards to isolated columns over 300mm wide – 1.12 15.12 3.11 m2 18.23 not exceeding 300mm wide – 0.59 8.32 0.89 m 9.21
12.50mm thick boards to ceilings over 300mm wide – 0.95 12.72 3.11 m2 15.83 over 300mm wide; 3.50m-5.00m high – 1.06 14.27 3.11 m2 17.38 not exceeding 300mm wide – 0.45 6.34 0.89 m 7.23
Material £ hours £ £ rate £
M20 PLASTERED/RENDERED/ROUGHCAST COATING – cont
Plaster – cont 12.50mm thick boards to ceilings; in staircase areas or plant rooms
over 300mm wide – 1.06 14.27 3.11 m2 17.38 not exceeding 300mm wide – 0.51 7.20 0.89 m 8.09
12.50mm thick boards to isolated beams over 300mm wide – 1.15 15.54 3.11 m2 18.65 not exceeding 300mm wide – 0.56 7.90 0.89 m 8.79
Accessories Expamet render beads or other equal and approved; white PVC nosings; to brickwork or blockwork base
external stop bead; ref 573 – 0.07 0.98 4.81 m 5.79 Expamet render beads or other equal and approved; stainless steel; to brickwork or blockwork base
stop bead; ref 546 – 0.07 0.98 3.94 m 4.92 stop bead; ref 547 – 0.07 0.98 3.94 m 4.92
Expamet plaster beads or other equal and approved; galvanized steel; to brickwork or blockwork base
angle bead; ref 550 – 0.08 1.13 1.01 m 2.14 architrave bead; ref 579 – 0.10 1.41 2.78 m 4.19 stop bead; ref 562 – 0.07 0.98 1.25 m 2.23 stop beads; ref 563 – 0.07 0.98 1.73 m 2.71 movement bead; ref 588 – 0.09 1.27 9.72 m 10.99
Expamet plaster beads or other equal and approved; stainless steel; to brickwork or blockwork base
angle bead; ref 545 – 0.08 1.13 4.43 m 5.56 stop bead; ref 534 – 0.07 0.98 3.94 m 4.92 stop bead; ref 533 – 0.07 0.98 3.94 m 4.92
Expamet thin coat plaster beads or other equal and approved; galvanized steel; to timber base
angle bead; ref 553 – 0.07 0.98 0.95 m 1.93 stop bead; ref 560 – 0.06 0.85 1.45 m 2.30 stop bead; ref 561 – 0.06 0.85 1.45 m 2.30
Material £ hours £ £ rate £
M21 INSULATION WITH RENDERED FINISH
Sto Therm Classic M-system insulation render 70mm EPS insulation fixed with adhesive to SFS structure (measured separately) with horizontal PVC intermediate track and vertical T-spines; with glassfibre mesh reinforcement embedded in Sto Armat Classic Basecoat Render and Stolit K 1.5 Decorative Topcoat Render (white)
over 300mm wide – – – – m2 48.79 70mm EPS insulation mechanically fixed to SFS structure (measured separately) with horizontal PVC intermediate track and vertical T-spines; with glassfibre mesh reinforcement embedded in Sto Armat Classic Basecoat Render and Stolit K 1.5 Decorative Topcoat Render (white)
over 300mm wide – – – – m2 53.68 rendered heads and reveals not exceeding 100mm wide; including angle beads – – – – m 13.47
Extra for aluminium starter track at base of insulated render system – – – – m 8.20 external angle with PVC mesh angle bead – – – – m 3.61 internal angle with Sto Armor angle – – – – m 3.61 render stop bead – – – – m 3.61 Sto seal tape to all vertical abutments – – – – m 3.36
Sto Armor mat HD mesh reinforcement to areas prone to physical damage (e.g. 1800mm high adjoining floor level)
over 300mm wide – – – – m2 10.79
M22 SPRAYED MINERAL FIBRE COATINGS
Prepare and apply by spray Mandolite CP2 fire protection or other equal and approved on structural steel/metalwork 16mm thick (one hour) fire protection
to walls and columns – – – – m2 8.07 to ceilings and beams – – – – m2 8.91 to isolated metalwork – – – – m2 17.76
22mm thick (one and a half hour) fire protection to walls and columns – – – – m2 9.39 to ceilings and beams – – – – m2 10.41 to isolated metalwork – – – – m2 20.83
28mm thick (two hour) fire protection to walls and columns – – – – m2 11.01 to ceilings and beams – – – – m2 12.02 to isolated metalwork – – – – m2 24.04
Material £ hours £ £ rate £
M22 SPRAYED MINERAL FIBRE COATINGS – cont
Prepare and apply by spray Mandolite CP2 fire protection or other equal and approved on structural steel/metalwork – cont 52mm thick (four hour) fire protection
to walls and columns – – – – m2 16.65 to ceilings and beams – – – – m2 18.54 to isolated metalwork – – – – m2 36.89
Prepare and apply by spray; cementitious Pyrok WF26 render or other equal and approved; on expanded metal lathing (not included) 15mm thick
to ceilings and beams – – – – m2 25.55
M30 METAL MESH LATHING/ANCHORED REINFORCEMENT FOR PLASTERED COATINGS
Accessories Preformed galvanized expanded steel semicircular arch-frames; Expamet or other equal and approved; to suit walls up to 230mm thick
for 760mm opening; ref ESC 30 70.45 0.46 5.86 72.21 nr 78.07 for 840mm opening; ref ESC 32 71.60 0.46 5.86 73.39 nr 79.25 for 920mm opening; ref ESC 36 86.54 0.46 5.86 88.70 nr 94.56 for 1220mm opening; ref ESC 48 107.85 0.46 5.86 110.55 nr 116.41
Lathing; Expamet BB expanded metal lathing or other equal and approved; BS EN 13658; 50mm laps 6mm thick mesh linings to ceilings; fixing with staples; to softwood base; over 300mm wide
ref BB263; 0.500mm thick 6.25 0.56 7.13 6.41 m2 13.54 ref BB264; 0.675mm thick 8.75 0.56 7.13 8.97 m2 16.10
6mm thick mesh linings to ceilings; fixing with wire; to steelwork; over 300mm wide
ref BB263; 0.500mm thick – 0.59 7.53 6.41 m2 13.94 ref BB264; 0.675mm thick – 0.59 7.53 8.97 m2 16.50
6mm thick mesh linings to ceilings; fixing with wire; to steelwork; not exceeding 300mm wide
ref BB263; 0.500mm thick – 0.37 4.70 6.41 m2 11.11 ref BB264; 0.675mm thick – 0.37 4.70 8.97 m2 13.67 raking cutting – 0.19 2.68 – m 2.68 cutting and fitting around pipes; not exceeding 0.30m girth – 0.28 3.95 – nr 3.95
Material £ hours £ £ rate £
Lathing; Expamet Riblath or Spraylath or other equal and approved stiffened expanded metal lathing or similar; 50mm laps 10mm thick mesh lining to walls; fixing with nails; to softwood base; over 300mm wide
Riblath ref 269; 0.30mm thick 13.14 0.46 5.86 13.55 m2 19.41 Riblath ref 271; 0.50mm thick 10.34 0.46 5.86 10.69 m2 16.55
10mm thick mesh lining to walls; fixing with nails; to softwood base; not exceeding 300mm wide
Riblath ref 269; 0.30mm thick – 0.28 3.57 4.10 m2 7.67 Riblath ref 271; 0.50mm thick – 0.28 3.57 3.24 m2 6.81
10mm thick mesh lining to walls; fixing to brick or blockwork; over 300mm wide
Red-rib ref 274; 0.50mm thick 13.14 0.37 4.70 14.42 m2 19.12 Stainless steel Riblath ref 267; 0.30mm thick 25.53 0.37 4.70 27.12 m2 31.82
10mm thick mesh lining to ceilings; fixing with wire; to steelwork; over 300mm wide
Riblath ref 269; 0.30mm thick – 0.59 7.53 13.85 m2 21.38 Riblath ref 271; 0.50mm thick – 0.59 7.53 10.98 m2 18.51
M31 FIBROUS PLASTER
Fibrous plaster; fixing with screws; plugging; countersinking; stopping; filling and pointing joints with plaster 16mm thick plain slab coverings to ceilings
over 300mm wide – – – – m2 101.73 not exceeding 300mm wide – – – – m 34.22
Coves; not exceeding 150mm girth per 25mm girth – – – – m 4.91
Coves; 150mm-300mm girth per 25mm girth – – – – m 6.01
Cornices per 25mm girth – – – – m 6.10
Cornice enrichments per 25mm girth; depending on degree of enrichments – – – – m 7.21
Fibrous plaster; fixing with plaster wadding filling and pointing joints with plaster; to steel base 16mm thick plain slab coverings to ceilings
over 300mm wide – – – – m2 101.73 not exceeding 300mm wide – – – – m 34.22
16mm thick plain casings to stanchions per 25mm girth – – – – m 3.05
16mm thick plain casings to beams per 25mm girth – – – – m 3.05
Material £ hours £ £ rate £
M31 FIBROUS PLASTER – cont
Gyproc cove or other equal and approved; fixing with adhesive; filling and pointing joints with plaster Cove
125mm girth – 0.19 2.68 1.13 m 3.81 Angles – 0.03 0.42 0.70 nr 1.12
M40 STONE/CONCRETE/QUARRY/CERAMIC TILING
ALTERNATIVE TILE MATERIALS Dennis Ruabon clay floor quarries (£/1000)
194mm×194mm×12.5mm; square; red – – – 423.73 1000 423.73 194mm×194mm×12.5mm; red; polygon; red – – – 31.41 m2 31.41 150mm×150mm×12.5mm; square; heatherbrown – – – 482.41 1000 482.41 150mm×150mm×12.5mm; studded square; heatherbrown or red – – – 702.75 1000 702.75 150mm×150mm×12.50mm; polygon; red – – – 44.88 m2 44.88
SUPPLY AND FIX PRICES
Clay floor quarries; BS EN 10545; class 1; Dennis Ruabon tiles or other equal and approved; level bedding 10mm thick and jointing in cement and sand (1:3); butt joints; straight both ways; flush pointing with grout; to cement and sand base Work to floors; over 300mm wide
150mm×150mm×12.50mm thick; heatherbrown – 0.74 14.37 27.37 m2 41.74 150mm×150mm×12.50mm thick; red – 0.74 14.37 24.93 m2 39.30 194mm×194mm×12.50mm thick; heatherbrown – 0.60 11.65 22.04 m2 33.69
Works to floors; in staircase areas or plant rooms 150mm×150mm×12.50mm thick; heatherbrown – 0.83 16.12 27.37 m2 43.49 150mm×150mm×12.50mm thick; red – 0.83 16.12 24.93 m2 41.05 194mm×194mm×12.50mm thick; heatherbrown – 0.69 13.41 22.04 m2 35.45
Work to floors; not exceeding 300mm wide 150mm×150mm×12.50mm thick; heatherbrown – 0.37 7.19 7.12 m 14.31 150mm×150mm×12.50mm thick; red – 0.37 7.19 6.37 m 13.56 194mm×194mm×12.50mm thick; heatherbrown – 0.31 6.02 5.37 m 11.39 fair square cutting against flush edges of existing finishes – 0.11 1.47 1.73 m 3.20 raking cutting – 0.19 2.58 1.95 m 4.53 cutting around pipes; not exceeding 0.30m girth – 0.14 1.98 – nr 1.98 extra for cutting and fitting into recessed manhole cover 600mm×600mm – 0.93 13.12 – nr 13.12
Material £ hours £ £ rate £
Work to sills; 150mm wide; rounded edge tiles 200mm×150mm×22mm thick; interior; heatherbrown or red – 0.31 6.02 6.64 m 12.66 150mm×173mm×58mm thick; exterior; heatherbrown or red – 0.32 6.21 27.55 m 33.76
fitted end – 0.14 1.98 – nr 1.98 Coved skirtings; 150mm high; rounded top edge
150mm×150mm×12.50mm thick; ref. CBTR; heatherbrown or red – 0.23 4.47 7.79 m 12.26 150mm×150mm×12.50mm thick; ref. RE; heatherbrown or red – 0.23 4.47 5.44 m 9.91
ends – 0.04 0.56 – nr 0.56 angles – 0.14 1.98 2.02 nr 4.00
Glazed ceramic wall tiles; BS EN 10545; fixing with adhesive; butt joints; straight both ways; flush pointing with white grout; to plaster base Work to walls; over 300mm wide
152mm×152mm×5.50mm thick; white 10.58 0.56 14.00 12.01 m2 26.01 152mm×152mm×5.50mm thick; light colours 12.88 0.56 14.00 14.36 m2 28.36 152mm×152mm×5.50mm thick; dark colours 14.08 0.56 14.00 15.59 m2 29.59 extra for RE or REX tile – – – 5.54 m2 5.54 200mm×100mm×6.50mm thick; white and light colours 10.58 0.56 14.00 12.01 m2 26.01 250mm×200mm×7mm thick; white and light colours 11.43 0.56 14.00 12.88 m2 26.88
Work to walls; in staircase areas or plant rooms 152mm×152mm×5.50mm thick; white – 0.62 15.50 12.01 m2 27.51
Work to walls; not exceeding 300mm wide 152mm×152mm×5.50mm thick; white – 0.28 7.00 3.59 m 10.59 152mm×152mm×5.50mm thick; light colours – 0.28 7.00 4.48 m 11.48 152mm×152mm×5.50mm thick; dark colours – 0.28 7.00 4.85 m 11.85 200mm×100mm×6.50mm thick; white and light colours – 0.28 7.00 3.59 m 10.59 250mm×200mm×7mm thick; white and light colours – 0.23 5.75 3.85 m 9.60 cutting around pipes; not exceeding 0.30m girth – 0.09 1.27 – nr 1.27
Work to sills; 150mm wide; rounded edge tiles 152mm×152mm×5.50mm thick; white – 0.23 5.75 1.79 m 7.54 fitted end – 0.09 1.27 – nr 1.27
198mm×64.50mm×6mm thick wall tiles; fixing with adhesive; butt joints; straight both ways; flush pointing with white grout; to plaster base Work to walls
over 300mm wide 25.91 1.67 41.75 27.73 m2 69.48 not exceeding 300mm wide – 0.65 16.25 8.30 m 24.55
Material £ hours £ £ rate £
M40 STONE/CONCRETE/QUARRY/CERAMIC TILING – cont
20mm×20mm×5.50mm thick glazed mosaic wall tiles; fixing with adhesive; butt joints; straight both ways; flush pointing with white grout; to plaster base Work to walls
over 300mm wide 31.80 1.76 44.00 33.84 m2 77.84 not exceeding 300mm wide – 0.69 17.25 10.42 m 27.67
50mm×50mm×5.50mm thick slip-resistant mosaic floor tiles, Series 2 or other equal and approved; Langley London Ltd; fixing with adhesive; butt joints; straight both ways; flush pointing with white grout; to cement and sand base Work to floors
over 300mm wide 27.05 1.76 34.18 29.14 m2 63.32 not exceeding 300mm wide – 0.69 13.41 8.96 m 22.37
Dakota mahogany granite cladding; polished finish; jointed and pointed in coloured mortar (1:2:8) 20mm work to floors; level; to cement and sand base
over 300mm wide – – – – m2 287.24 20mm×300mm treads; plain nosings – – – – m 163.45 raking, cutting – – – – m 29.31 polished edges – – – – m 36.85 birdsmouth – – – – m 38.03
20mm thick work to walls; to cement and sand base over 300mm wide – – – – m2 293.02 not exceeding 300mm wide – – – – m 131.85
40mm thick work to walls; to cement and sand base over 300mm wide – – – – m2 486.53 not exceeding 300mm wide – – – – m 218.93
Riven Welsh slate floor tiles; level; bedding 10mm thick and jointing in cement and sand (1:3); butt joints; straight both ways; flush pointing with coloured mortar; to cement and sand base Work to floors; over 300mm wide
250mm×250mm×12mm-15mm thick – 0.56 14.00 38.24 m2 52.24 Work to floors; not exceeding 300mm wide
250mm×250mm×12mm-15mm thick – 0.28 7.00 11.54 m 18.54
Material £ hours £ £ rate £
Roman Travertine marble cladding; polished finish; jointed and pointed in coloured mortar (1:2:8) 20mm thick work to floors; level; to cement and sand base
over 300mm wide – – – – m2 187.58 20mm×300mm treads; plain nosings – – – – m 113.00 raking cutting – – – – m 21.91 polished edges – – – – m 20.14 birdsmouth – – – – m 40.37
20mm thick work to walls; to cement and sand base over 300mm wide – – – – m2 223.05 not exceeding 300mm wide – – – – m 100.90
40mm thick work to walls; to cement and sand base over 300mm wide – – – – m2 307.04 not exceeding 300mm wide – – – – m 138.16
M41 TERRAZZO TILING/IN SITU TERRAZZO
Terrazzo tiles; BS EN 13748; aggregate size random ground grouted and polished to 80's grit finish; standard colour range; 3mm joints symmetrical layout; bedding in 42mm cement semi-dry mix (1:4); grouting with neat matching cement 300mm×300mm×28mm (nominal) Terrazzo tile units; hydraulically pressed, mechanically vibrated, steam cured; to floors on concrete base (not included); sealed with penetrating case hardener or other equal and approved; 2 coats applied immediately after final polishing
plain; laid level – – – – m2 41.40 plain; to slopes exceeding 15° from horizontal – – – – m2 50.46 to small areas/toilets – – – – m2 94.76
Accessories plastic division strips; 6mm × 38mm; set into floor tiling above crack inducing joints, to the nearest full tile module – – – – m 2.86
Material £ hours £ £ rate £
M41 TERRAZZO TILING/IN SITU TERRAZZO – cont
Specially made terrazzo precast units; BS EN 13748-1; aggregate size random; standard colour range; 3mm joints; grouting with neat matching cement Standard tread and riser square combined terrazzo units (with riser cast down) or other equal and approved; 280mm wide; 150mm high; 40mm thick; machine-made; vibrated and fully machine polished; incorporating 1 nr. ‘Ferodo’ anti-slip insert ref. OT40D or other equal and approved cast-in during manufacture; one end polished only
fixed with cement: sand (1:4) mortar on prepared backgrounds (not included); grouted in neat tinted cement; wiped clean on completion of fixing – – – – m 216.80
Standard tread square terrazzo units or other equal and approved; 40mm thick; 280mm wide; factory polished; incorporating 1 nr. ‘Ferodo’ anti-slip insert ref. OT40D or other equal and approved
fixed with cement: sand (1:4) mortar on prepared backgrounds (not included); grouted in neat tinted cement; wiped clean on completion of fixing – – – – m 130.44
extra over for 55×55mm contrasting colour to step nosing – – – – m 45.59
Standard riser square terrazzo units or other equal and approved; 40mm thick; 150mm high; factory polished
fixed with cemnt: sand (1:4) mortar on prepared backgrounds (not included); grouted in neat tinted cement; wiped clean on completion of fixing – – – – m 80.94
Standard coved terrazzo skirting units or other equal and approved; 904mm long; 150mm high; nominal finish; 23mm thick; with square top edge
fixed with cement: sand (1:4) mortar on prepared backgrounds (by others); grouted in neat tinted cement; wiped clean on completion of fixing – – – – m 76.04
extra over for special internal/external angle pieces to match – – – – m 21.59 extra over for special polished ends – – – – nr 7.12
Material £ hours £ £ rate £
M42 WOOD BLOCK/COMPOSITION BLOCK/ PARQUET
Wood blocks; Havwoods or other equal and approved; 25mm thick; level; laid to herringbone pattern with 2 block borderl; fixing with adhesive; to cement: sand base; sanded and sealed Work to floors; over 300mm wide
Merbau – – – – m2 92.66 Iroko – – – – m2 92.66 American Oak – – – – m2 97.12 European Oak – – – – m2 101.57
Add to wood block flooring over 300mm wide for buff; one coat seal – – – – m2 3.56 buff; two coats seal – – – – m2 5.79 sand; three coats for seal or oil – – – – m2 16.04
M50 RUBBER/PLASTIC/CORK/LINO/CARPET TILING/SHEETING
Linoleum sheet; Forbo-Nairn Marmoleum Real or other equal and approved; level; fixing with adhesive; butt joints; to cement and sand base Work to floors; over 300mm wide
2.50mm thick – 0.37 7.19 8.21 m2 15.40 3.20mm thick; marbled – 0.37 7.19 10.19 m2 17.38
Linoleum sheet; Forbo-Nairn Walton or other equal and approved; level; with welded seams; fixing with adhesive; to cement and sand base Work to floors; over 300mm wide
2.50mm thick; plain – 0.46 8.94 9.43 m2 18.37
Vinyl sheet; Altro Safety range or other equal and approved; with welded seams; level; fixing with adhesive where appropriate; to cement and sand base Work to floors; over 300mm wide
2.00mm thick; Impressionist II – 0.74 14.37 20.65 m2 35.02 2.00mm thick; Marine – 0.56 10.88 15.11 m2 25.99 2.00mm thick; Suprema – 0.74 14.37 21.91 m2 36.28 2.00mm thick; Timbersafe II – 0.74 14.37 21.82 m2 36.19 2.00mm thick; Walkway – 0.56 10.88 12.42 m2 23.30 2.20mm thick; Xpresslay (NB No adhesive required) – 0.74 14.37 12.28 m2 26.65 2.50mm thick; Classic 25 – 0.65 12.63 16.91 m2 29.54 2.50mm thick; Maxis – 0.74 14.37 25.59 m2 39.96 2.50mm thick; Designer – 0.74 14.37 24.34 m2 38.71 3.50mm thick; Stronghold 30 – 0.74 14.37 22.83 m2 37.20
Material £ hours £ £ rate £
M50 RUBBER/PLASTIC/CORK/LINO/CARPET TILING/SHEETING – cont
Vinyl sheet; Altro Sports surfaces range, or other equal and approved; with welded seams; level; fixing with adhesive; to cement and sand base Work to floors; over 300mm wide
4.00mm thick; Mondoflex – 0.70 13.60 17.31 m2 30.91 4.50mm thick; Mondo Sportflex – 0.70 13.60 20.98 m2 34.58
Slip-resistant vinyl sheet; Forbo-Nairn Surestep or other equal and approved; level with welded seams; fixing with adhesive; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.46 8.94 10.11 m2 19.05
Homogeneous Vinyl sheet; Marleyflor Plus or other equal and approved; level; with welded seams; fixing with adhesive; level; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.42 8.16 6.06 m2 14.22 2.00mm thick skirtings
100mm high – 0.11 2.13 1.46 m 3.59
Safety sheet; Marleyflor Granite Multisafe or other equal and approved; level; with welded seams; fixing with adhesive; level; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.42 8.16 11.70 m2 19.86
Vinyl sheet; Marley Omnisports or other equal and approved; level; with welded seams; fixing with adhesive; level; to cement and sand base Work to floors; over 300mm wide
7.65mm thick; Pro – 0.90 17.48 23.52 m2 41.00 8.75mm thick; Competition – 1.00 19.42 27.52 m2 46.94
Vinyl semi-flexible tiles; Marley Homogeneous tiles range or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
300mm×300mm×2.00mm thick; Vylon Plus – 0.23 4.47 5.18 m2 9.65 500mm×500mm×2.00mm thick; Marleyflor Plus – 0.20 3.88 6.28 m2 10.16
Material £ hours £ £ rate £
Vinyl tiles; Polyflex Plus or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
300mm×300mm×2.00mm thick – 0.23 4.47 5.59 m2 10.06
Vinyl tiles; Polyflex Camaro or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
300mm×300mm×2.00mm thick – 0.30 5.82 12.17 m2 17.99
Vinyl tiles; Polyflor XL or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
300mm×300mm×2.00mm thick – 0.32 6.21 6.89 m2 13.10
Vinyl sheet; Polyflor XL or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.28 5.34 4.84 m2 10.18
Vinyl sheet; Polysafe Standard or other equal and approved; level; fixing with adhesive; welded seams; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.28 5.34 8.60 m2 13.94 2.50mm thick – 0.28 5.34 12.53 m2 17.87
Vinyl sheet; Polysafe hydro or other equal and approved; level; fixing with adhesive; welded seams; to cement and sand base Work to floors; over 300mm wide
2.00mm thick – 0.28 5.34 11.02 m2 16.36
Luxury mineral vinyl tiles; Marley I D Naturelle or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
330mm×330mm×2.00mm thick – 0.23 4.47 8.27 m2 12.74
Acoustic vinyl tiles; Marley Tapiflex 243 or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
500mm×500mm×2.00mm thick – 0.20 3.88 11.06 m2 14.94
Material £ hours £ £ rate £
M50 RUBBER/PLASTIC/CORK/LINO/CARPET TILING/SHEETING – cont
Linoleum tiles; Marley Veneto XF or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
500mm×500mm×2.50mm thick – 0.20 3.88 13.05 m2 16.93
Linoleum tiles; BS 6826; Forbo-Nairn Floors or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
2.50mm thick (marble pattern) – 0.28 5.44 9.21 m2 14.65
Cork tiles Wicanders Cork-Master or other equal and approved; level; fixing with adhesive; butt joints; straight both ways; to cement and sand base Work to floors; over 300mm wide
300mm×300mm×4.00mm thick – 0.37 7.19 18.84 m2 26.03
Rubber studded tiles; Altro Mondopave or other equal and approved; level; fixing with adhesive; butt joints; straight to cement and sand base Work to floors; over 300mm wide
500mm×500mm×2.50mm thick; type MRB; black – 0.56 10.88 23.46 m2 34.34 500mm×500mm×4.00mm thick; type MRB; black – 0.56 10.88 26.67 m2 37.55
Work to landings; over 300mm wide 500mm×500mm×4.00mm thick; type MRB; black – 0.74 14.37 26.67 m2 41.04
4.00mm thick to tread 275mm wide – 0.46 8.94 7.93 m 16.87
4.00mm thick to riser 180mm wide – 0.56 10.88 5.62 m 16.50
Sundry floor sheeting underlays For floor finishings; over 300mm wide
building paper to BS 1521; class A; 75mm lap (laying only) – 0.05 0.57 – m2 0.57 3.20mm thick hardboard – 0.19 4.75 1.19 m2 5.94 6.00mm thick plywood – 0.28 7.00 4.59 m2 11.59
Skirtings; plastic; Gradus or equivalent Set-in skirtings
100mm high; ref. SI1002.5P – 0.11 2.13 1.87 m 4.00 150mm high; ref. SI1502P – 0.22 4.27 2.80 m 7.07
Set-on skirtings
Material £ hours £ £ rate £
Stair nosings; aluminium; Gradus or equivalent Medium duty hard aluminium alloy stair tread nosings; plugged and screwed in concrete
56mm×32mm; ref AS11 8.74 0.23 3.24 9.00 m 12.24 84mm×32mm; ref AS12 12.09 0.28 3.95 12.44 m 16.39
Heavy duty aluminium alloy stair tread nosings; plugged and screwed to concrete
48mm×38mm; ref HE1 10.20 0.28 3.95 10.51 m 14.46 82mm×38mm; ref HE2 14.15 0.32 4.51 14.55 m 19.06
Carpet tiles to cement and sand base Work to floors over 300mm wide
Heuga 580 heavy duty loop pile 18.31 0.28 5.44 18.77 m2 24.21 Gradus Adventure range; bitumen backing; tufted pattern loop pile 15.98 0.28 5.44 16.38 m2 21.82 Latour/Predator ranges; bitumen backing; loop pile 8.27 0.28 5.44 8.48 m2 13.92
PVC Wall lining; Altro Whiterock; or other equal and approved; fixed directly to plastered brick or blockwork Work to walls over 300mm wide
Standard white – 1.00 14.10 32.78 m2 46.88 Satins – 1.00 14.10 39.37 m2 53.47 Stone – 1.30 18.34 56.88 m2 75.22 Illusions – 1.30 18.34 56.88 m2 75.22 Chameleon – 1.30 18.34 59.26 m2 77.60
M51 EDGE FIXED CARPETING
Fitted carpeting; Wilton wool/nylon or other equal and approved; 80/20 velvet pile; heavy domestic plain Work to floors
over 300mm wide 22.00 0.37 4.87 22.55 m2 27.42 Work to treads and risers
over 300mm wide – 0.74 9.75 22.55 m2 32.30
Fitted carpeting; Gradus broadloom polypropylene or other equal and approved Work to floors over 300mm wide
Bodega/Pacific/Predator ranges, loop pile 8.86 0.37 4.87 9.08 m2 13.95 Genus/Volnay ranges, cut pile 14.97 0.33 4.39 15.34 m2 19.73
Work to treads and risers over 300mm wide – 0.74 9.75 14.68 m2 24.43
Underlay to carpeting Work to floors
over 300mm wide 1.55 0.07 0.92 1.59 m2 2.51 raking cutting – 0.07 0.80 – m 0.80
Sundries
Material £ hours £ £ rate £
M52 DECORATIVE PAPERS/FABRICS
Lining paper; and hanging Plaster walls or columns
over 300mm girth (PC £ per roll) 2.12 0.19 2.68 0.32 m2 3.00 Plaster ceilings or beams
over 300mm girth 2.12 0.23 3.24 0.32 m2 3.56
Decorative paper-backed vinyl wallpaper; and hanging Plaster walls or columns
over 300mm girth (PC £ per roll) 9.45 0.23 3.24 1.66 m2 4.90
M60 PAINTING/CLEAR FINISHING – INTERNAL
BASIC PAINT PRICES Paints
matt emulsion 18.20 – – – 5litre – gloss 20.35 – – – 5litre – eggshell gloss 28.37 – – – 5litre – oil-based undercoat 20.35 – – – 5litre – Weathershield gloss 27.72 – – – 5litre – Weathershield undercoat 40.24 – – – 5litre – Sandtex masonry paint
brilliant white 10.78 – – – 5litre – coloured 19.16 – – – 5litre –
Primer/undercoats acrylic 14.23 – – – 5litre – red oxide 22.16 – – – 5litre – water-based 16.84 – – – 5litre – zinc phosphate 34.38 – – – 5litre – masonry sealer 15.29 – – – 5litre – mdf primer 40.62 – – – 5litre – knotting solution 43.30 – – – 5litre –
Special paints solar reflective aluminium 35.76 – – – 5litre – anti-graffiti 115.46 – – – 5litre – bituminous emulsion 12.56 – – – 5litre – Hammerite 41.44 – – – 5litre – fire retardant
undercoat 48.41 – – – 5litre – top coat 64.48 – – – 5litre –
Stains and Preservatives Cuprinol
Clear 21.70 – – – 5litre – Boiled linseed oil 25.02 – – – 5litre –
Sadolin Extra 45.93 – – – 5litre – New Base 20.26 – – – 5litre –
Material £ hours £ £ rate £
Sikkens Cetol HLS 45.12 – – – 5litre – Cetol TS 64.90 – – – 5litre – Cetol Filter 7 68.64 – – – 5litre –
Protim Solignum Architectural 46.73 – – – 5litre – Green 44.18 – – – 5litre – Cedar 44.18 – – – 5litre –
Varnishes polyurethane 32.75 – – – 5litre –
SUPPLY AND FIX PRICES
NOTE: The following prices include for preparing surfaces. Painting woodwork also includes for knotting prior to applying the priming coat and for all stopping of nail holes etc.