Work roll diameter after F2-F4: : 715 mm Backup roll diameter 1335 mm Roll barrel length 218 4 mm WRB range ofF2-F6 stands: -50 to 100 t Permissible flatness (inclination): + 1.5% after FS, F6:). Rolled material: low carbon steel 2.34 2.50 4.31 4.31 4.37 Strip width, 1235

doi:10.1201/9781466564640-155

Chapter

ABSTRACT

In the dual-direction roll bending systems, the bending forces can be applied either directly to the roll body (Fig. 22.15a) [14], through the chocks only (Fig. 22.15b) [24], or through the roll ends and the middle of the roll (Fig. 22.15c) [25].