ABSTRACT
Voltage sags are short duration reductions in rms voltage, mainly caused by short circuits and starting of
large motors. The interest in voltage sags is due to the problems they cause on several types of equipment.
Adjustable-speed drives, process-control equipment, and computers are especially notorious for their
sensitivity (Conrad et al., 1991; McGranaghan et al., 1993). Some pieces of equipment trip when the rms
voltage drops below 90% for longer than one or two cycles. Such a piece of equipment will trip tens of
times a year. If this is the process-control equipment of a paper mill, one can imagine that the costs due
to voltage sags can be enormous. A voltage sag is not as damaging to industry as a (long or short)
interruption, but as there are far more voltage sags than interruptions, the total damage due to sags is
still larger. Another important aspect of voltage sags is that they are hard to mitigate. Short interruptions
and many long interruptions can be prevented via simple, although expensive measures in the local
distribution network. Voltage sags at equipment terminals can be due to short-circuit faults hundreds of
kilometers away in the transmission system. It will be clear that there is no simple method to
prevent them.