Virtual and Rapid Manufacturing | Advanced Research in Virtual and Rap

Book

Virtual and Rapid Manufacturing

ABSTRACT

Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key

TABLE OF CONTENTS

part |70 pages

Invited lectures

chapter |3 pages

State of the industry

chapter |7 pages

Rapid manufacturing of metallic objects: A challenge for research and industry

chapter |7 pages

Data fusion and shape retrieval methods for 3D geometric structures

chapter |12 pages

Scan and solve: Acquiring the physics of artifacts *

chapter |12 pages

Tangible virtual reality for product design

chapter |4 pages

Interoperability isn't (yet), and what's being done about it

chapter |6 pages

The use of multiple materials in Rapid Prototyping

chapter |5 pages

A novel poly (lactic-co-glycolic acid)-collagen hybrid scaffold fabricated via multi-nozzle low-temperature deposition

chapter |8 pages

Scaffold-based bone engineering by using Rapid Prototyping Technologies

part |105 pages

Biomanufacturing

chapter |8 pages

Mechanical behaviour and vascularisation analysis of tissue engineering scaffolds

chapter |5 pages

Evolutionary optimization for soft tissue engineering

chapter |10 pages

Porogen based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering

chapter |4 pages

Development of novel Rapid-Freeze Prototyping for tissue engineering

chapter |5 pages

Evaluation of degradation of bioabsorbable polycaprolactone used in Rapid Prototyping for medical application

chapter |7 pages

Laser powder micro deposition of Ti6Al4V for the rapid manufacture of dental implants

chapter |6 pages

Functionally graded scaffolds: The challenges in design and fabrication processes

chapter |7 pages

Characterisation of HA/polymer bio-composite structure fabricated by selective laser sintering

chapter |6 pages

Classification of image artifacts due to amalgam restoration in Computed Tomography for the improvement of Rapid Prototyping biomodels

chapter |7 pages

InVesalius: Three-dimensional medical reconstruction software

chapter |5 pages

Two-dimensional X-ray simulation based on Computed Tomography images

chapter |5 pages

An integrated physical and virtual prototyping approach for medical applications

chapter |4 pages

The virtual biomodel as a complementary resource for the diagnosis of mandibular ankylosis

chapter |8 pages

Customized implant development for maxillo-mandibular reconstruction

chapter |4 pages

Rapid Prototyping applied to surgical planning for correcting craniofacial malformations in wild animals. A case study of a brazilian fox

chapter |5 pages

BioExtrusion for tissue engineering applications

part |85 pages

CAD and 3D data acquisition technologies

chapter |7 pages

Automatic usability data acquisition and interface simulation using stereolithography mock-up and internal video analysis

chapter |7 pages

Heterogeneous soft material modeling and virtual prototyping with 5-DOF haptic force feedback for product development

chapter |7 pages

Reverse engineering from 3D optical acquisition: Application to crime scene investigation

chapter |6 pages

A novel high-resolution algorithm for detecting laser stripe center

chapter |7 pages

Fast digitizing of 3D shapes by automatic alignment of multiple range maps

chapter |6 pages

Coded targets photogrammetry for 3D digitization of human faces

chapter |7 pages

Surface roughness parameters determination model in machining with the use of design and visualization technologies

chapter |5 pages

Preliminary budget methodology for reverse engineering applications using laser scanning

chapter |5 pages

A Neural Network technique for re-meshing of bone micro-structure

chapter |7 pages

Knowledge representation for subassembly designing using CBR methodology

chapter |5 pages

Theses analysis on CAD/RP technology

chapter |5 pages

Agile-CAD for reverse engineering

part |138 pages

Materials

chapter |10 pages

Electrowetting based multi-microfluidics array printing of high resolution tissue construct with embedded cells and growth factors

chapter |8 pages

Fabrication of functionally graded bio materials by Nano Composite Deposition System

chapter |5 pages

Biodegradable stereolithography resins with defined mechanical properties

chapter |6 pages

The influence of bond-coating on plasma sprayed alumina-titania, doped with biologically derived hydroxyapatite, on stainless steel

chapter |4 pages

Acrylic based hydrogel phantom for in-vitro ultrasound contrast agent characterization

chapter |5 pages

A study of the degradation of Duraform PA due to cyclic processing

chapter |7 pages

The manufacturing of PMMA/PS blends by selective laser sintering

chapter |5 pages

Manufacture by selective laser sintering of functionally graded PA6/PA12 components with applications in antifriction materials

chapter |5 pages

Investigation of shrinkage strains in a photo-curable resin for 3D micro-fabrication using a FBG sensor

chapter |5 pages

Development of nanocomposite material for rapid manufacturing: Application in microreactor technology

chapter |10 pages

Manufacturing cellular materials via Three-Dimensional Printing of spray-dried metal oxide ceramic powder

chapter |6 pages

Material characterization for Fused Deposition of Ceramics

chapter |6 pages

Localized irradiations for covalent graftings on glass substrates

chapter |5 pages

Rapid prototyping of amorphous silica through laser stereolithography

chapter |9 pages

Development of a model to optimize the sand shape and post process parameters for parts produced by Direct Croning Process

chapter |6 pages

Additive manufacturing of Ti-6Al-4V based components with high power fiber lasers

chapter |7 pages

Copper powder densification by means of DMLF process: The effect of energy density input and oxidation

chapter |6 pages

Foaming alginate for tissue engineering

chapter |6 pages

The effect of thermal conductivity of RIM moulds in kinetics cure

chapter |6 pages

Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts

part |88 pages

Rapid tooling and manufacturing

chapter |6 pages

Digitally Adjustable Tooling technology for dieless forming and jigless assembly of panels

chapter |6 pages

Rapid Tooling and the LOMOLD process

chapter |4 pages

Fabrication of stainless steel and ceramic parts with the Optoform process

chapter |6 pages

Manufacturing criteria in hybrid modular tools: How to combine additive and subtractive processes

chapter |5 pages

The effect of the mould material selection and production methodology on the thermal behaviour and tribology of injection moulds

chapter |6 pages

CAD/CAE techniques to prevent premature failure in direct AIM moulding inserts

chapter |6 pages

Rapid Tooling aided by Virtual Prototyping for blow-molds development

chapter |5 pages

Multiple material moulds – Directives for blow moulding design

chapter |6 pages

Rapid Prototyping applied to a new development in moulds for rotational moulding

chapter |8 pages

Rapid Tooling route selection and evaluation for sand and investment casting

chapter |6 pages

Direct manufacturing of pneumatic grippers by stereolithography

chapter |8 pages

Rapid Metal Casting – A review of present status

chapter |6 pages

Pursuing successful Rapid Manufacturing in a standards-less industry: a best practice approach

chapter |6 pages

Application of Rapid Prototyping/Rapid Tooling in manufacturing experimental stereotypes of new-style emitters

part |185 pages

Advanced rapid prototyping technologies and nanofabrication

chapter |10 pages

Sources of Gold and Silver in Islam According to Al-Hamdānī

chapter |8 pages

Process accuracy during laser based stereo lithography and production of Ormocer® micro systems with related mechanical properties

chapter |5 pages

Freeform fabrication of metals by 3D Micro Welding

chapter |6 pages

Deep Proton Writing: A tool for rapid prototyping of polymer micro-opto-mechanical modules

chapter |8 pages

Feedback control of Selective Laser Melting

chapter |8 pages

Selective Laser Melting of lattice structures in solid shells

chapter |4 pages

Complex structure micro-parts formed with Selective Laser Melting method

chapter |4 pages

Type HRPM-II machine for Selective Laser Melting process

chapter |8 pages

Investigation on polyamide powder properties deterioration and efficient powder recycling in Laser Sintering

chapter |6 pages

Influence of the process parameters on the liquid bridges between particles in SLS

chapter |4 pages

Application of Rapid Manufacturing to build artifacts for using in microgravity environment. An International Space Station case

chapter |6 pages

Intelligent optimization of process parameters in Selective Laser Sintering

chapter |5 pages

Expanding applications and opportunities with Polyjet™ Rapid Prototyping technology

chapter |5 pages

A novel combination of materials for Rapid Manufacturing of 3-dimensional objects by ink-jet printing

chapter |7 pages

Super-saturation drowning-out coating of metal particles for usage in layered manufacturing processes; Process development, design and manufacturing of coating machine

chapter |7 pages

SEDS – A new rapid prototyping method based on metal powder sintering

chapter |5 pages

Laminated Object Manufacturing with aluminium bonded sheets

chapter |8 pages

Ultrasonic Consolidation with aluminum and copper

chapter |6 pages

Incremental Sheet Forming (ISF) as small batch production method

chapter |6 pages

Some experimental studies of mechanical behavior of FDM Rapid Prototyped parts

chapter |6 pages

Part strength analysis of Shell Assisted Layer Manufacturing (SALM)

chapter |6 pages

Effect of constraint on residual stresses and deformations in weld based Rapid Prototyping

chapter |6 pages

Investigations of the energy input of different metal processing, additive layer manufacturing methods

chapter |6 pages

A new 2D inner/outer contour identification method for layer manufacturing

chapter |7 pages

Putting it all together: Rapid Prototype as Design

chapter |6 pages

Multi-objective optimal positioning and packing for layered manufacturing

chapter |4 pages

Lean thinking and Rapid Prototyping: Towards a shorter distance between the drawing board and the construction site

chapter |2 pages

Novel Rapid Prototyping processes – Building movable parts

chapter |7 pages

Functionally Gradient Material laser rapid prototyping system

chapter |53 pages

Virtual environments

chapter |6 pages

3D Photo-realistic talking head for human-robot interaction

chapter |6 pages

Human machine interaction based on Bayesian analysis of human movements

chapter |5 pages

Collaborative workspace for aircraft maintenance

chapter |7 pages

Generation of an automobile driving training interactive environment

chapter |6 pages

Functional requirements for user-interface architectures for Virtual Enterprise dynamic reconfiguration

chapter |8 pages

The feasibility of consumer evaluation of products using virtual prototyping technologies

chapter |5 pages

Digital fabrication in the arts: Just another technical reproduction advance leap or a new artistic revolution?

chapter |5 pages

Modeling of heat transfer and phase transformations in the rapid manufacturing of dental prosthesis by laser powder micro-deposition

part |55 pages

Collaborative design and engineering

chapter |7 pages

3D scan and RP for the as-built data collection and related design studies in a city

chapter |8 pages

Augmented Prototyping as a design means for industrial design – A multiple case analysis

chapter |6 pages

Method for increasing innovation capacity in development of casing type details

chapter |4 pages

The impact of the Rapid Prototyping in the product design development

chapter |5 pages

A new conceptual framework based on the ECSI model to support Axiomatic Design

chapter |7 pages

Efficiency analysis of prototype evolution methodology on collaborative design

chapter |6 pages

Whither one of a kind?

chapter |7 pages

Custom design, more than custom to fit!

part |62 pages

Applications

chapter |7 pages

Saving a project through Rapid Manufacture in South Africa

chapter |6 pages

Mass customisation of foot orthoses for rheumatoid arthritis

chapter |5 pages

Tactile scale models: Three-dimensional info-graphics for space orientation of the blind and visually impaired

chapter |4 pages

Using intelligent prototypes to improve the aerodynamic design of race car aerofoil profiles

chapter |6 pages

Effect of wind loading on low rise buildings using finite element modelling and Computational Fluid Dynamics: A commercially focused approach

chapter |5 pages

Rapid product development by reverse engineering

chapter |6 pages

Study of a composite material with metallic particles for application in an automobile component

chapter |9 pages

Development of a type of sandwich panels for the aeronautical industry

chapter |8 pages

Study and characterization of a material with carbon fibres for the production of an ergonomic easy chair