FIGURE 3 (a) Sector cross section. (b) Curve 1: pressure P (kPa) vs. β

Chapter

ABSTRACT

Because the lining pressure on a segment decreases with angle θ from the centerline of that segment according to equation (4-2), use six weights to get a greater force transfer, each subtending an angle n=42°.

FIGURE 3 (a) Sector cross section. (b) Curve 1: pressure P (kPa) vs. β; Curve 2: initial contact speed n (rpm) vs. β. (c) Sector width w (cm) vs. β.

ABSTRACT