ABSTRACT
How you access the Top Menu depends on the setting ‘Resume’, which is found on page 11 of the
Maintenance Menu. Depending on this setting, access is gained either by holding the rotary encoder in and moving the switch at the front of the camera to MENU (these switches can be seen in Figure 33.1), or you will find TOP displayed in the top right-hand corner of the screen whenever the menu is
brought up on the screen, and the Top Menu can be accessed by rotating the encoder until the cursor points at the word Top and then clicking the encoder. The rotary encoder lives on the right of the camera control panel, which on the Sony camera is sited below the lens mount. On the Panavision version, the panel is on a flying lead, as shown in Figure 33.2. The Top Menu will appear in the
viewfinder, as in Figure 33.3.
