ABSTRACT

Edges, beaded code 4 m 0.30 4.35 0.00 0.65 5.00 code 5 m 0.30 4.35 0.00 0.65 5.00 code 6 m 0.50 7.25 0.00 1.09 8.34 Dressing over slating and tiling code 4 m 0.20 2.90 0.00 0.44 3.34 code 5 m 0.25 3.63 0.00 0.54 4.17 code 6 m 0.30 4.35 0.00 0.65 5.00 code 7 m 0.35 5.08 0.00 0.76 5.84 Soakers, size 150×150mm code 3 nr 0.20 2.90 1.10 0.60 4.60 code 4 nr 0.25 3.63 1.24 0.73 5.59 Soakers, size 200×300mm code 3 nr 0.25 3.63 1.85 0.82 6.30

code 3 nr 0.30 4.35 2.22 0.99 7.56 code 4 nr 0.35 5.08 2.56 1.15 8.78 Slates, size 400×400mm with 200mm high collar 100mm diameter

code 4 nr 1.40 20.30 8.88 4.38 33.56 code 5 nr 1.50 21.75 9.57 4.70 36.02 Slates, size 400×400mm with 200mm high collar 150mm diameter

code 4 nr 1.60 23.20 9.32 4.88 37.40 code 5 nr 1.70 24.65 9.64 5.14 39.43 Dots, cast lead code 3 nr 0.70 10.15 1.48 1.74 13.37 code 4 nr 0.75 10.88 1.60 1.87 14.35 code 5 nr 0.80 11.60 1.72 2.00 15.32

Baths

UnitHoursHours £

Mat’ls £

O&P £

Total £

Acrylic reinforced bath size 1500 ×700mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 2.75 39.88 124.56 24.67 189.10 Acrylic reinforced bath size 1700 ×700mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 2.90 42.05 141.23 27.49 210.77 coloured nr 2.90 42.05 153.81 29.38 225.24 Acrylic reinforced bath size 1700 ×800mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 3.00 43.50 171.24 32.21 246.95 coloured nr 3.00 43.50 187.64 34.67 265.81 Acrylic reinforced bath size 1700 ×800mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 3.10 44.95 221.47 39.96 306.38

Bath accessories

UnitHoursHours £

Mat’ls £

O&P £

Total £

Porcelain enamel standard gauge bath size 1700×700mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 3.00 43.50 147.94 28.72 220.16 coloured nr 3.00 43.50 161.28 30.72 235.50 Porcelain enamel heavy gauge bath size 1700×700mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 3.10 44.95 154.67 29.94 229.56 coloured nr 3.10 44.95 194.69 35.95 275.59 Porcelain enamel heavy gauge (shallow) bath size 1700×700mm complete with 2nr chromium plated grips, 40mm waste fitting, overflow with chain and plastic plug

white nr 3.10 44.95 228.14 40.96 314.05 coloured nr 3.10 44.95 265.54 46.57 357.06

Bath panels, enamelled hardboard, fixing with chromium-plated dome headed screws, cutting to length

end panel nr 0.30 4.35 9.87 2.13 16.35 side panel nr 0.50 7.25 11.89 2.87 22.01

Basins and pedestals

end panel nr 0.30 4.35 12.55 2.54 19.44 side panel nr 0.50 7.25 14.99 3.34 25.58

UnitHoursHours £

Mat’ls £

O&P £

Total £

Angle strip polished aluminium, fixing with chromium-plated dome headed screws, cutting to length

25×25×560mm long nr 0.35 5.08 4.55 1.44 11.07

Wash basin, vitreous china size 510×410mm complete with pedestal, chromium-plated waste, overflow with chain and plastic plug

white nr 2.20 31.90 82.46 17.15 131.51 coloured nr 2.20 31.90 89.75 18.25 139.90 Wash basin, vitreous china size 560×455mm complete with pedestal, chromium-plated waste, overflow with chain and plastic plug

white nr 2.25 32.63 75.65 16.24 124.52 coloured nr 2.25 32.63 91.55 18.63 142.80 Wash basin, vitreous china size 610×470mm complete with pedestal, chromium-plated waste, overflow with chain and plastic plug

white nr 2.30 33.35 85.61 17.84 136.80 coloured nr 2.30 33.35 92.55 18.89 144.79 Wash basin, vitreous china size 510×410mm complete with brackets, chromium-plated waste, overflow with

Sinks and tops

coloured nr 2.00 29.00 72.92 15.29 117.21

UnitHoursHours £

Mat’ls £

O&P £

Total £

Wash basin, vitreous china size 560×455mm complete with brackets, chromium-plated waste, overflow with chain and plastic plug

white nr 2.25 32.63 65.33 14.69 112.65 coloured nr 2.25 32.63 75.61 16.24 124.47 Wash basin, vitreous china size 610×470mm complete with brackets, chromium-plated waste, overflow with chain and plastic plug

white nr 2.30 33.35 68.94 15.34 117.63 coloured nr 2.30 33.35 75.63 16.35 125.33

Stainless steel single sit-on type sink, complete with inset chromium-plated waste, overflow with chain and plastic plug, size

1000×500mm nr 1.30 18.85 86.24 15.76 120.85 1000×600mm nr 1.40 20.30 92.65 16.94 129.89 1200×600mm nr 1.50 21.75 104.22 18.90 144.87 Stainless steel single roll-edge type sink, complete with inset chromiumplated waste, overflow with chain and plastic plug, size

1000×500mm nr 1.30 18.85 89.05 16.19 124.09 1000×600mm nr 1.40 20.30 96.61 17.54 134.45

WC suites

complete with inset chromium-plated waste, overflow with chain and plastic plug, size

1500×500mm nr 1.80 26.10 107.54 20.05 153.69 1500×600mm nr 1.90 27.55 123.64 22.68 173.87

UnitHoursHours £

Mat’ls £

O&P £

Total £

Stainless steel double roll-edge type sink, complete with inset chromium-plated waste, overflow with chain and plastic plug, size

1000×500mm nr 1.80 26.10 115.71 21.27 163.08 1000×600mm nr 1.90 27.55 128.61 23.42 179.58 Belfast pattern white fireclay sink, complete with chromiumplated waste, chain and plastic plug, wall-mounted on brackets, size

450×380×205mm nr 2.35 34.08 115.57 22.45 172.09 610×455×255mm nr 2.40 34.80 161.23 29.40 225.43 760×455×255mm nr 2.45 26.80 215.66 36.37 278.83

Vitreous china low-level WC suite comprising pan, plastic seat and cover, 9 litre cistern, low-pressure ball valve, connecting pipework screwed to floor

nr 2.35 34.08 204.56 35.80 274.43

Vitreous china low-level close coupled WC suite comprising pan, plastic seat and cover, 9 litre cistern, low-pressure ball valve, connecting

nr 2.45 35.53 274.97 46.57 357.07

Bidets

Urinals

Free-standing plain rim, vitreous china bidet excluding fittings

white nr 2.50 36.25 258.79 44.26 339.30 coloured nr 2.50 36.25 278.40 47.20 361.85

UnitHoursHours £

Mat’ls £

O&P £

Total £

Bowl urinals, white vitreous china, wall-mounted on hangers chromium-plated dome outlet

430mm wide×305mm high nr 1.00 14.50 110.14 18.70 143.34 500mm wide×350mm high nr 1.10 15.95 152.67 25.29 193.91 Stainless steel flush pipes and spreaders for bowl urinals, face fixed to wall

one bowl set nr 1.20 17.40 58.97 11.46 87.83 two bowl set nr 1.75 25.38 102.46 19.18 147.01 three bowl set nr 2.10 30.45 148.92 26.91 206.28 Automatic flushing cistern and fittings, white vitreous china, wall-mounted on brackets

4.5 litre nr 1.00 14.50 124.76 20.89 160.15 9 litre nr 1.05 15.23 140.27 23.32 178.82 13.5 litre nr 1.15 16.68 169.67 27.95 214.30 Modular slab urinal, white fireclay china, comprising back slabs without

Taps

Valves

Showers

cistern, stainless steel flush pipes two persons nr 5.20 75.40 602.27 101.65 779.32 three persons nr 6.00 87.00 987.68 161.20 1235.88 four persons nr 7.00 101.50 1250.67 202.83 1555.00

Chromium-plated pillar taps 13mm pr 0.40 5.80 23.88 4.45 34.13 19mm pr 0.45 6.53 31.92 5.77 44.21

UnitHours Hours £

Mat’ls £

O&P £

Total £

Chromium-plated mixer taps, 19mm

cross-top handles pr 0.60 8.70 58.93 10.14 77.77 lever handles pr 0.60 8.70 79.38 13.21 101.29 Chromium-plated bidet monoblock and spray

nr 0.70 10.15 170.26 27.06 207.47

Chromium-plated thermostatic exposed shower valve with flexible hose, slide rail and spray set

nr 1.40 20.30 201.56 33.28 255.14

Instant electric 9.5kw shower with flexible hose, slide rail and spray set

nr 1.50 21.75 167.28 28.35 217.38

Shower cubicle size 788×842× nr 2.00 29.00 689.48 107.77 826.25

White glazed fireclay shower tray size 900×900×180mm with chromium-plated waste fitting

nr 1.80 26.10 178.71 30.72 235.53

White acrylic fireclay shower tray size 750×750×180mm with chromium-plated waste fitting

nr 1.30 18.85 94.35 16.98 130.18

UnitHours Hours £

Mat’ls £

O&P £

Total £

Cutting holes for pipes up to 25mm diameter in walls 102.5mm thick

commons nr 0.40 5.80 0.00 0.87 6.67 facings nr 0.70 10.15 0.00 1.52 11.67 engineering class A nr 0.90 13.05 0.00 1.96 15.01 engineering class B nr 0.75 10.88 0.00 1.63 12.51 Cutting holes for pipes up to 25mm diameter in walls 100mm thick

concrete blocks nr 0.30 4.35 0.00 0.65 5.00 Thermalite blocks nr 0.20 2.90 0.00 0.44 3.34 aerated concrete blocks nr 0.25 3.63 0.00 0.54 4.17 Cutting holes for pipes up to 25mm diameter in walls 225mm thick

commons nr 0.80 11.60 0.00 1.74 13.34 facings nr 0.85 12.33 0.00 1.85 14.17 engineering class A nr 1.30 18.85 0.00 2.83 21.68 engineering class B nr 1.50 21.75 0.00 3.26 25.01 Cutting holes for pipes up to 25mm diameter in walls 100mm thick

concrete blocks nr 0.45 6.53 0.00 0.98 7.50 Thermalite blocks nr 0.30 4.35 0.00 0.65 5.00 aerated concrete blocks nr 0.35 5.08 0.00 0.76 5.84

Cutting holes for pipes up to 25 to 50mm diameter in walls 102.5mm thick

commons nr 0.50 7.25 0.00 1.09 8.34 facings nr 0.80 11.60 0.00 1.74 13.34 engineering class A nr 1.00 14.50 0.00 2.18 16.68 engineering class B nr 0.85 12.33 0.00 1.85 14.17 Cutting holes for pipes up to 25 to 50mm diameter in walls 100mm thick

concrete blocks nr 0.40 5.80 0.00 0.87 6.67 Thermalite blocks nr 0.30 4.35 0.00 0.65 5.00 aerated concrete blocks nr 0.35 5.08 0.00 0.76 5.84 Cutting holes for pipes up to 25 to 50mm diameter in walls 225mm thick

commons nr 1.05 15.23 0.00 2.28 17.51 facings nr 1.10 15.95 0.00 2.39 18.34 engineering class A nr 1.60 23.20 0.00 3.48 26.68 engineering class B nr 1.80 26.10 0.00 3.92 30.02 Cutting holes for pipes up to 25 to 50mm diameter in walls 100mm thick

concrete blocks nr 0.60 8.70 0.00 1.31 10.01 Thermalite blocks nr 0.40 5.80 0.00 0.87 6.67 aerated concrete blocks nr 0.45 6.53 0.00 0.98 7.50 Cutting and pinning ends of pipe support brackets and make good to

concrete nr 0.45 6.53 0.00 0.98 7.50 brickwork nr 0.35 5.08 0.00 0.76 5.84 blockwork nr 0.30 4.35 0.00 0.65 5.00 tiled walls nr 0.50 7.25 0.00 1.09 8.34

Cut opening through cavity wall comprising facing bricks and concrete blocks

balanced flue outlet nr 0.90 13.05 0.00 1.96 15.01 150mm diameter flue pipe nr 0.75 10.88 0.00 1.63 12.51 19mm overflow pipe nr 0.20 2.90 0.00 0.44 3.34 Cutting chases for one pipe up to 25mm diameter in

commons nr 0.35 5.08 0.00 0.76 5.84 facings nr 0.38 5.51 0.00 0.83 6.34 engineering class A nr 0.45 6.53 0.00 0.98 7.50 engineering class B nr 0.40 5.80 0.00 0.87 6.67 concrete blocks nr 0.35 5.08 0.00 0.76 5.84 Thermalite blocks nr 0.25 3.63 0.00 0.54 4.17 aerated concrete blocks nr 0.20 2.90 0.00 0.44 3.34 Cutting chases for two pipes up to 25mm diameter or one pipe 50mm diameter in

commons m 0.45 6.53 0.00 0.98 7.50 facings m 0.50 7.25 0.00 1.09 8.34 engineering class A m 0.65 9.43 0.00 1.41 10.84 engineering class B m 0.55 7.98 0.00 1.20 9.17 concrete blocks m 0.40 5.80 0.00 0.87 6.67 Thermalite blocks m 0.30 4.35 0.00 0.65 5.00 aerated concrete blocks m 0.90 13.05 0.00 1.96 15.01 Make good surfaces both sides of chases

plastered surfaces m 0.15 2.18 0.65 0.42 3.25 tiled surfaces m 0.25 3.63 2.15 0.87 6.64 concrete floor m 0.35 5.08 0.65 0.86 6.58 granolithic floor m 0.50 7.25 0.70 1.19 9.14 concrete soffit m 0.55 7.98 0.65 1.29 9.92

PVC-U rainwater pipe plugged to brickwork with pipe brackets and fitting clips at 2m maximum centres

Aluminium rainwater pipe, straight, plain eared, spigot and socket dry joints plugged to brickwork

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 68mm diameter pipe m 0.25 3.63 5.61 1.39 10.62 extra over for bend, 87.5 degrees nr 0.25 3.63 5.39 1.35 10.37 offset nr 0.25 3.63 3.21 1.03 7.86 branch nr 0.25 3.63 10.73 2.15 16.51 shoe nr 0.25 3.63 4.65 1.24 9.52 access pipe nr 0.25 3.63 14.77 2.76 21.15 hopper head nr 0.25 3.63 17.26 3.13 24.02 68mm square pipe m 0.25 3.63 6.72 1.55 11.90 extra over for bend, 87.5 degrees nr 0.25 3.63 3.44 1.06 8.12 offset nr 0.25 3.63 6.04 1.45 11.11 branch nr 0.25 3.63 12.16 2.37 18.15 shoe nr 0.25 3.63 3.95 1.14 8.71 access pipe nr 0.25 3.63 18.44 3.31 25.37 hopper head nr 0.25 3.63 17.26 3.13 24.02

63mm diameter pipe m 0.28 4.06 15.33 2.91 22.30 extra over for offset, 75mm nr 0.28 4.06 29.01 4.96 38.03 offset, 100mm nr 0.28 4.06 29.01 4.96 38.03 offset, 150mm nr 0.28 4.06 29.01 4.96 38.03 offset, 225mm nr 0.28 4.06 34.82 5.83 44.71

Unit Hours Hours £ Mat’ls £ O&P £ Total £ bend, 92.5 degrees nr 0.28 4.06 23.61 4.15 31.82 branch nr 0.28 4.06 25.26 4.40 33.72 shoe nr 0.28 4.06 8.80 1.93 14.79 standard hopper nr 0.28 4.06 24.53 4.29 32.88 flatback hopper nr 0.28 4.06 17.14 3.18 24.38 76mm diameter pipe m 0.30 4.35 18.89 3.49 26.73 extra over for offset, 75mm nr 0.30 4.35 35.69 6.01 46.05 offset, 100mm nr 0.30 4.35 35.69 6.01 46.05 offset, 150mm nr 0.30 4.35 35.69 6.01 46.05 offset, 225mm nr 0.30 4.35 42.27 6.99 53.61 offset, 300mm nr 0.30 4.35 42.82 7.08 54.25 bend, 92.5 degrees nr 0.30 4.35 26.54 4.63 35.52 branch nr 0.30 4.35 30.35 5.21 39.91 shoe nr 0.30 4.35 12.16 2.48 18.99 standard hopper nr 0.30 4.35 25.66 4.50 34.51 flatback hopper nr 0.30 4.35 17.14 3.22 24.71 102mm diameter pipe m 0.32 4.64 26.38 4.65 35.67 extra over for offset, 75mm nr 0.32 4.64 43.39 7.20 55.23 offset, 100mm nr 0.32 4.64 43.39 7.20 55.23 offset, 150mm nr 0.32 4.64 43.39 7.20 55.23 offset, 225mm nr 0.32 4.64 50.63 8.29 63.56 offset, 300mm nr 0.32 4.64 50.63 8.29 63.56 bend, 92.5 degrees nr 0.32 4.64 38.05 6.40 49.09 branch nr 0.32 4.64 40.81 6.82 52.27 shoe nr 0.32 4.64 16.05 3.10 23.79 standard hopper nr 0.32 4.64 34.35 5.85 44.84 ornamental hopper nr 0.32 4.64 120.00 18.70 143.34

plugged to brickwork

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 65mm diameter pipe m 0.25 3.63 20.47 3.61 27.71 extra over for offset, 75mm nr 0.25 3.63 15.28 2.84 21.74 offset, 115mm nr 0.25 3.63 15.28 2.84 21.74 offset, 150mm nr 0.25 3.63 15.28 2.84 21.74 offset, 225mm nr 0.25 3.63 17.79 3.21 24.63 offset, 305mm nr 0.25 3.63 20.83 3.67 28.12 bend nr 0.25 3.63 9.98 2.04 15.65 branch nr 0.25 3.63 19.62 3.49 26.73 shoe nr 0.25 3.63 14.14 2.66 20.43 eared shoe nr 0.25 3.63 16.30 2.99 22.91 flat hopper nr 0.25 3.63 12.74 2.45 18.82 rectangular hopper nr 0.25 3.63 56.74 9.05 69.42 75mm diameter pipe m 0.30 4.35 20.51 3.73 28.59 extra over for offset, 75mm nr 0.30 4.35 15.28 2.94 22.57 offset, 115mm nr 0.30 4.35 15.28 2.94 22.57 offset, 150mm nr 0.30 4.35 15.28 2.94 22.57 offset, 225mm nr 0.30 4.35 17.79 3.32 25.46 offset, 305mm nr 0.30 4.35 21.86 3.93 30.14 bend nr 0.30 4.35 12.12 2.47 18.94 branch nr 0.30 4.35 21.22 3.84 29.41 shoe nr 0.30 4.35 14.14 2.77 21.26 eared shoe nr 0.30 4.35 16.30 3.10 23.75 flat hopper nr 0.30 4.35 14.47 2.82 21.64 rectangular hopper nr 0.30 4.35 56.74 9.16 70.25 100mm diameter pipe m 0.35 5.08 26.80 4.78 36.66 extra over for offset, 75mm nr 0.35 5.08 28.83 5.09 38.99 offset, 115mm nr 0.35 5.08 29.39 5.17 39.63 offset, 150mm nr 0.35 5.08 28.83 5.09 38.99 offset, 225mm nr 0.35 5.08 34.91 6.00 45.98

PVC-U half round rainwater gutter, fixed to timber with support brackets at 1m maximum centres

Unit Hours Hours £ Mat’ls £ O&P £ Total £ branch nr 0.35 5.08 25.21 4.54 34.83 shoe nr 0.35 5.08 19.06 3.62 27.76 eared shoe nr 0.35 5.08 21.66 4.01 30.75 flat hopper nr 0.35 5.08 32.06 5.57 42.71 rectangular hopper nr 0.35 5.08 56.74 9.27 71.09

76mm elliptical gutter m 0.20 2.90 6.07 1.35 10.32 extra over for running outlet nr 0.20 2.90 5.53 1.26 9.69 angle nr 0.20 2.90 6.03 1.34 10.27 stop end outlet nr 0.10 1.45 4.85 0.95 7.25 stop end nr 0.10 1.45 2.97 0.66 5.08 112mm half-round gutter m 0.26 3.77 4.48 1.24 9.49 extra over for running outlet nr 0.26 3.77 3.90 1.15 8.82 angle nr 0.26 3.77 4.45 1.23 9.45 stop end outlet nr 0.13 1.89 3.90 0.87 6.65 stop end nr 0.13 1.89 1.95 0.58 4.41 150mm half-round gutter m 0.30 4.35 6.61 1.64 12.60 extra over for running outlet nr 0.30 4.35 9.00 2.00 15.35 angle nr 0.30 4.35 9.27 2.04 15.66 stop end outlet nr 0.15 2.18 5.66 1.18 9.01 stop end nr 0.15 2.18 1.82 0.60 4.59

with support brackets at 1m maximum centres

Aluminium ogee rainwater gutter with mastic joints, fixed to timber with support brackets at 1m maximum centres

Unit Hours Hours £Mat’ls £ O&P £ Total £ 100mm gutter m 0.30 4.35 12.29 2.50 19.14 extra over for running outlet nr 0.30 4.35 10.96 2.30 17.61 angle nr 0.30 4.35 6.45 1.62 12.42 stop end outlet nr 0.15 2.18 6.30 1.27 9.75 stop end nr 0.15 2.18 2.43 0.69 5.30 125mm gutter m 0.32 4.64 15.49 3.02 23.15 extra over for running outlet nr 0.32 4.64 10.48 2.27 17.39 angle nr 0.32 4.64 8.79 2.01 15.44 stop end outlet nr 0.16 2.32 7.25 1.44 11.01 stop end nr 0.16 2.32 3.16 0.82 6.30

120×75mm gutter m 0.30 4.35 15.88 3.03 23.26 extra over for running outlet nr 0.30 4.35 20.00 3.65 28.00 angle nr 0.30 4.35 16.75 3.17 24.27 stop end outlet nr 0.15 2.18 27.95 4.52 34.64 stop end nr 0.15 2.18 3.90 0.91 6.99 155×100mm gutter m 0.32 4.64 29.95 5.19 39.78 extra over for running outlet nr 0.32 4.64 26.45 4.66 35.75 angle nr 0.32 4.64 25.86 4.58 35.08 stop end outlet nr 0.16 2.32 21.55 3.58 27.45 stop end nr 0.16 2.32 15.74 2.71 20.77

timber with support brackets at 1m maximum centres

Roof outlets

Unit Hours Hours £Mat’ls £ O&P £ Total £ 100mm gutter m 0.36 5.22 10.85 2.41 18.48 extra over for running outlet nr 0.36 5.22 6.97 1.83 14.02 angle nr 0.36 5.22 7.16 1.86 14.24 stop end outlet nr 0.18 2.61 8.18 1.62 12.41 stop end nr 0.18 2.61 2.41 0.75 5.77 115mm gutter m 0.38 5.51 11.20 2.51 19.22 extra over for running outlet nr 0.38 5.51 7.60 1.97 15.08 angle nr 0.38 5.51 7.37 1.93 14.81 stop end outlet nr 0.19 2.76 9.17 1.79 13.71 stop end nr 0.19 2.76 3.12 0.88 6.76 125mm gutter m 0.40 5.80 12.95 2.81 21.56 extra over for running outlet nr 0.40 5.80 7.23 1.95 14.98 angle nr 0.40 5.80 8.69 2.17 16.66 stop end outlet nr 0.20 2.90 10.46 2.00 15.36 stop end nr 0.20 2.90 3.12 0.90 6.92 150mm gutter m 0.44 6.38 21.64 4.20 32.22 extra over for running outlet nr 0.44 6.38 13.56 2.99 22.93 angle nr 0.44 6.38 15.87 3.34 25.59 stop end outlet nr 0.22 3.19 17.20 3.06 23.45 stop end nr 0.22 3.19 4.32 1.13 8.64

UnitHours Hours £

Mat’ls £

O&P £

Total £

Cast iron circular roof outlet with flat grate, diameter

100mm nr 0.70 10.15 95.34 15.82 121.31 Aluminium circular roof outlet with domed grate, diameter

50mm nr 0.50 7.25 68.85 11.42 87.52 75mm nr 0.60 8.70 78.60 13.10 100.40 100mm nr 0.70 10.15 101.46 16.74 128.35 150mm nr 0.80 11.60 113.55 18.77 143.92 Plastic wire balloon guard for pipes and outlets, diameter

50mm nr 0.05 0.73 1.98 0.41 3.11 63mm nr 0.05 0.73 2.10 0.42 3.25 75mm nr 0.05 0.73 2.16 0.43 3.32 100mm nr 0.05 0.73 2.18 0.44 3.34 Galvanised wire balloon guard for pipes and outlets, diameter

50mm nr 0.05 0.73 1.65 0.36 2.73 63mm nr 0.05 0.73 1.71 0.37 2.80 75mm nr 0.05 0.73 1.75 0.37 2.85 100mm nr 0.05 0.73 2.18 0.44 3.34 Copper wire balloon guard for pipes and outlets, diameter

50mm nr 0.05 0.73 1.97 0.40 3.10 63mm nr 0.05 0.73 2.00 0.41 3.13 75mm nr 0.05 0.73 2.15 0.43 3.31 100mm nr 0.05 0.73 3.02 0.56 4.31

MuPVC waste system, solvent welded joints, clips at 500mm maximum centres, plugged to brickwork

UnitHoursHours £Mat’ls £O&P £Total £ 32mm diameter pipe m 0.25 3.63 3.02 1.00 7.64 extra over for bend, 45 degrees nr 0.24 3.48 1.84 0.80 6.12 bend, 87.5 degrees nr 0.24 3.48 1.84 0.80 6.12 long tail bend, 90 degrees nr 0.24 3.48 1.84 0.80 6.12 tee nr 0.24 3.48 3.14 0.99 7.61 bottle trap nr 0.24 3.48 4.27 1.16 8.91 tubular P trap nr 0.24 3.48 4.20 1.15 8.83 tubular S trap nr 0.24 3.48 5.03 1.28 9.79 40mm diameter pipe m 0.28 4.06 3.25 1.10 8.41 extra over for bend, 45 degrees nr 0.26 3.77 2.11 0.88 6.76 bend, 87.5 degrees nr 0.26 3.77 2.11 0.88 6.76 long tail bend, 90 degrees nr 0.26 3.77 2.11 0.88 6.76 tee nr 0.26 3.77 3.78 1.13 8.68 cross tee nr 0.26 3.77 10.12 2.08 15.97 bottle trap nr 0.26 3.77 4.85 1.29 9.91 tubular P trap nr 0.26 3.77 5.03 1.32 10.12 tubular S trap nr 0.26 3.77 5.99 1.46 11.22 running P trap nr 0.26 3.77 7.20 1.65 12.62 50mm diameter pipe m 0.34 4.93 4.57 1.43 10.93 extra over for bend, 45 degrees nr 0.32 4.64 2.95 1.14 8.73 bend, 87.5 degrees nr 0.32 4.64 2.95 1.14 8.73 long tail bend, 90 degrees nr 0.32 4.64 2.95 1.14 8.73 tee nr 0.32 4.64 6.34 1.65 12.63 cross tee nr 0.32 4.64 11.74 2.46 18.84

plugged to brickwork

PVC-U soil system, solvent-welded joints, holderbats at 1250mm maximum centres, plugged to brickwork

UnitHours Hours £

Mat’ls £

O&P £

Total £

32mm diameter pipe m 0.20 2.90 1.09 0.60 4.59 extra over for bend, 45 degrees nr 0.18 2.61 0.92 0.53 4.06 knuckle bend, 90 degrees nr 0.18 2.61 0.90 0.53 4.04 spigot bend, 90 degrees nr 0.18 2.61 1.13 0.56 4.30 tee nr 0.18 2.61 1.44 0.61 4.66 P trap, 38mm nr 0.18 2.61 4.20 1.02 7.83 bottle trap, 38mm nr 0.18 2.61 4.27 1.03 7.91 anti-syphon bottle trap, 76mm

nr 0.18 2.61 6.82 1.41 10.84

connection to back inlet gulley, caulking bush

nr 0.16 2.32 2.87 0.78 5.97

40mm diameter pipe m 0.24 3.48 1.84 0.80 6.12 extra over for bend, 45 degrees nr 0.20 2.90 0.98 0.58 4.46 knuckle bend, 90 degrees nr 0.20 2.90 0.92 0.57 4.39 spigot bend, 90 degrees nr 0.20 2.90 1.19 0.61 4.70 tee nr 0.20 2.90 1.48 0.66 5.04 P trap, 38mm nr 0.20 2.90 5.03 1.19 9.12 bottle trap, 38mm nr 0.20 2.90 4.85 1.16 8.91 anti-syphon bottle trap, 76mm

nr 0.20 2.90 7.89 1.62 12.41

connection to back inlet gulley, caulking bush

nr 0.18 2.61 2.11 0.71 5.43

82mm diameter pipe m 0.34 4.93 12.38 2.60 19.91 extra over for

bend, spigot/spigot nr 0.30 4.35 12.48 2.52 19.35

UnitHours Hours £

Mat’ls £

O&P £

Total £

branch, single, 92.5 degrees nr 0.38 5.51 18.35 3.58 27.44 branch, single, 135 degrees nr 0.38 5.51 18.35 3.58 27.44 access pipe, single branch nr 0.38 5.51 18.35 3.58 27.44 access cap nr 0.22 3.19 11.26 2.17 16.62 vent cowl nr 0.22 3.19 3.38 0.99 7.56 110mm diameter pipe m 0.38 5.51 11.53 2.56 19.60 extra over for bend, 92.5 degrees nr 0.34 4.93 14.82 2.96 22.71 bend, 135 degrees nr 0.34 4.93 14.82 2.96 22.71 bend, variable nr 0.34 4.93 14.82 2.96 22.71 bend, spigot/spigot nr 0.34 4.93 14.82 2.96 22.71 branch, single, 92.5 degrees nr 0.40 5.80 19.31 3.77 28.88 branch, single, 135 degrees nr 0.40 5.80 19.31 3.77 28.88 branch, single, 92.5 degrees spigot outlet

nr 0.40 5.80 19.31 3.77 28.88

access pipe connector nr 0.34 4.93 19.80 3.71 28.44 access pipe, single branch nr 0.34 4.93 19.31 3.64 27.88 access cap nr 0.38 5.51 11.89 2.61 20.01 WC manifold connector nr 0.38 5.51 9.07 2.19 16.77 vent cowl nr 0.22 3.19 3.56 1.01 7.76 150mm diameter pipe m 0.42 6.09 28.83 5.24 40.16 extra over for bend, 92.5 degrees nr 0.38 5.51 40.26 6.87 52.64 bend, 135 degrees nr 0.38 5.51 40.26 6.87 52.64 bend, spigot/spigot nr 0.38 5.51 40.26 6.87 52.64 bend, spigot/socket nr 0.38 5.51 40.26 6.87 52.64 branch, single, 92.5 degrees nr 0.42 6.09 66.31 10.86 83.26 branch, single, 135 degrees nr 0.42 6.09 66.31 10.86 83.26 access cap nr 0.40 5.80 32.62 5.76 44.18 vent cowl nr 0.24 3.48 10.04 2.03 15.55

centres, plugged to brickwork

UnitHours Hours £

Mat’ls £

O&P £

Total £

50mm diameter pipe m 0.55 7.98 19.88 4.18 32.03 extra over for bend, short radius nr 0.45 6.53 9.84 2.45 18.82 bend, short radius with door nr 0.45 6.53 24.26 4.62 35.40 branch, single, plain nr 0.50 7.25 14.81 3.31 25.37 branch, single with door nr 0.50 7.25 29.23 5.47 41.95 branch, double, plain nr 0.50 7.25 26.05 5.00 38.30 P trap with door nr 0.45 6.53 31.81 5.75 44.09 75mm diameter pipe m 0.60 8.70 19.67 4.26 32.63 extra over for bend, short radius nr 0.50 7.25 9.84 2.56 19.65 bend, short radius with door nr 0.50 7.25 24.26 4.73 36.24 bend, long radius nr 0.50 7.25 18.59 3.88 29.72 bend, long radius, access nr 0.50 7.25 33.00 6.04 46.29 branch, single, plain nr 0.55 7.98 14.81 3.42 26.20 branch, single with door nr 0.55 7.98 29.23 5.58 42.79 branch, double, plain nr 0.55 7.98 24.91 4.93 37.82 offset, 75mm projection nr 0.50 7.25 9.72 2.55 19.52 offset, 115mm projection nr 0.50 7.25 12.11 2.90 22.26 offset, 150mm projection nr 0.50 7.25 12.11 2.90 22.26 offset, 225mm projection nr 0.50 7.25 15.17 3.36 25.78 offset, 300mm projection nr 0.50 7.25 17.89 3.77 28.91 blank end, plain nr 0.50 7.25 3.54 1.62 12.41 blank end, drilled and tapped nr 0.50 7.25 8.40 2.35 18.00 P trap, plain nr 0.50 7.25 18.98 3.93 30.16 P trap with door nr 0.50 7.25 33.40 6.10 46.75 WC connector, 305mm effective length

nr 0.50 7.25 18.17 3.81 29.23

100mm diameter pipe m 0.65 9.43 29.47 5.83 44.73 extra over for bend, short radius nr 0.55 7.98 13.62 3.24 24.83 bend, short radius with door nr 0.55 7.98 28.80 5.52 42.29 bend, long radius nr 0.55 7.98 22.06 4.51 34.54 bend, long radius, access nr 0.55 7.98 37.26 6.79 52.02 bend, long radius, heel rest nr 0.55 7.98 26.71 5.20 39.89 bend, long tail, 87.5 degrees nr 0.55 7.98 17.60 3.84 29.41 branch, single, plain nr 0.60 8.70 21.05 4.46 34.21 branch, single with door nr 0.60 8.70 36.27 6.75 51.72 branch, double, plain nr 0.60 8.70 26.05 5.21 39.96 branch, double with door nr 0.60 8.70 41.24 7.49 57.43 branch, corner nr 0.60 8.70 34.27 6.45 49.42 offset, 75mm projection nr 0.55 7.98 14.33 3.35 25.65 offset, 115mm projection nr 0.55 7.98 17.08 3.76 28.81 offset, 150mm projection nr 0.55 7.98 17.08 3.76 28.81 offset, 225mm projection nr 0.55 7.98 19.58 4.13 31.69 offset, 300mm projection nr 0.55 7.98 22.06 4.51 34.54 blank end, plain nr 0.55 7.98 4.15 1.82 13.94 blank end, drilled and tapped

nr 0.55 7.98 9.02 2.55 19.54

P trap, plain nr 0.55 7.98 21.83 4.47 34.28 P trap with door nr 0.55 7.98 37.03 6.75 51.76 WC connector, 305mm effective length

nr 0.55 7.98 12.39 3.05 23.42

150mm diameter pipe m 0.70 10.15 57.23 10.11 77.49 extra over for bend, short radius nr 0.60 8.70 24.33 4.95 37.98 bend, short radius with door nr 0.60 8.70 40.92 7.44 57.06 bend, long radius nr 0.60 8.70 39.94 7.30 55.94 bend, long radius, access nr 0.60 8.70 5.65 2.15 16.50 branch, single, plain nr 0.65 9.43 43.31 7.91 60.65 branch, single with door nr 0.65 9.43 59.95 10.41 79.78 branch, double, plain nr 0.65 9.43 64.34 11.06 84.83 blank end, plain nr 0.60 8.70 5.99 2.20 16.89

MuPVC overflow system, solvent-welded joints, clips at 500mm maximum centres, plugged to brickwork

Polypropylene traps, screwed joints to outlet and pipe

P trap with door nr 0.60 8.70 64.48 10.98 84.16

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 19mm diameter pipe m 0.20 2.90 1.72 0.69 5.31 extra over for bend nr 0.18 2.61 1.26 0.58 4.45 tee nr 0.18 2.61 1.31 0.59 4.51 connector, bent tank nr 0.20 2.90 1.87 0.72 5.49

Bottle trap, 38mm seal 32mm nr 0.30 4.35 4.27 1.29 9.91 40mm nr 0.35 5.08 4.35 1.41 10.84 Bottle trap, 76mm seal 32mm nr 0.30 4.35 4.27 1.29 9.91 40mm nr 0.35 5.08 4.35 1.41 10.84 Anti-syphon bottle trap 32mm nr 0.30 4.35 6.82 1.68 12.85 40mm nr 0.35 5.08 7.09 1.82 13.99 Tubular S trap 32mm nr 0.30 4.35 5.03 1.41 10.79 40mm nr 0.35 5.08 5.99 1.66 12.72 Tubular P trap 32mm nr 0.30 4.35 4.20 1.28 9.83 40mm nr 0.35 5.08 5.03 1.52 11.62 Running P trap 40mm nr 0.35 5.08 7.20 1.84 14.12 Bath trap 40mm nr 0.35 5.08 6.32 1.71 13.10

Bath trap with overflow 40mm nr 0.35 5.08 5.90 1.65 12.62 Washing machine, half trap

40mm nr 0.35 5.08 4.20 1.39 10.67

Timesaver cast iron drainage, jointed with flexible couplings and laid in trenches prepared by others

UnitHours Hours £

Mat’ls £

O&P £

Total £

100mm diameter pipe laid straight m 0.40 5.80 30.28 5.41 41.49 laid vertically m 0.75 10.88 30.28 6.17 47.33 in lengths less than 3m m 0.70 10.15 33.09 6.49 49.73 Extra over for standard coupling nr 0.15 2.18 18.23 3.06 23.47 continuity clip for standard coupling

nr 0.10 1.45 1.02 0.37 2.84

stepped coupling nr 0.15 2.18 18.28 3.07 23.52 continuity clip for stepped coupling

nr 0.10 1.45 1.12 0.39 2.96

hanging bracket nr 0.50 7.25 11.96 2.88 22.09 bend, 87.5 degrees nr 0.40 5.80 36.09 6.28 48.17 bend, 80 degrees nr 0.40 5.80 36.09 6.28 48.17 bend, 67 degrees nr 0.40 5.80 35.10 6.14 47.04 bend, 60 degrees nr 0.40 5.80 35.10 6.14 47.04 bend, 45 degrees nr 0.40 5.80 33.71 5.93 45.44 bend, 35 degrees nr 0.40 5.80 33.71 5.93 45.44 bend, 22.5 degrees nr 0.40 5.80 31.53 5.60 42.93 bend, 10 degrees nr 0.40 5.80 29.25 5.26 40.31 bend, 87.5 degrees, heel rest nr 0.40 5.80 32.75 5.78 44.33 bend, access rear, 87.5 degrees

nr 0.40 5.80 68.36 11.12 85.28

bend, access rear, 45 degrees nr 0.40 5.80 68.36 11.12 85.28 bend, access side, 87.5 degrees

nr 0.40 5.80 74.34 12.02 92.16

degrees

bend, long radius, 87.5 degrees, with heel rest

nr 0.40 5.80 51.20 8.55 65.55

bend, long tail, 87.5 degrees nr 0.40 5.80 67.01 10.92 83.73

UnitHours Hours £

Mat’ls £

O&P £

Total £

bend, large radius, 87.5 degrees

nr 0.40 5.80 71.53 11.60 88.93

branch, 100×100mm, 87.5 degrees

nr 0.60 8.70 47.50 8.43 64.63

branch, 100×100mm, 67.5 degrees

nr 0.60 8.70 49.03 8.66 66.39

branch, 100×100mm, 45 degrees

nr 0.60 8.70 48.52 8.58 65.80

branch, 100×100mm, 87.5 degrees, right-hand access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 45 degrees, right-hand access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 87.5 degrees, rear access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 45 degrees, rear access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 87.5 degrees, left-hand access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 45 degrees, left-hand access

nr 0.60 8.70 81.22 13.49 103.41

branch, 100×100mm, 87.5 degrees, double plain

nr 0.60 8.70 63.02 10.76 82.48

socket ferrule with cap nr 0.40 5.80 31.63 5.61 43.04 blank cap plain nr 0.40 5.80 14.07 2.98 22.85 cleaning arm bend nr 0.60 8.70 51.12 8.97 68.79 transitional pipe, socket for clayware

nr 0.40 5.80 36.85 6.40 49.05

transitional pipe, socket for nr 0.40 5.80 28.69 5.17 39.66

laid straight m 0.60 8.70 54.23 9.44 72.37 laid vertically m 0.80 11.60 54.23 9.87 75.70 in lengths less than 3m m 0.90 13.05 56.23 10.39 79.67 Extra over for standard coupling nr 0.15 2.18 21.21 3.51 26.89 continuity clip for standard coupling

nr 0.10 1.45 1.21 0.40 3.06

UnitHours Hours £

Mat’ls £

O&P £

Total £

stepped coupling nr 0.15 2.18 1.32 0.52 4.02 continuity clip for stepped coupling

nr 0.10 1.45 1.37 0.42 3.24

hanging bracket nr 0.50 7.25 14.77 3.30 25.32 bend, 87.5 degrees nr 0.70 10.15 71.03 12.18 93.36 bend, 67.5 degrees nr 0.70 10.15 62.56 10.91 83.62 bend, 45 degrees nr 0.70 10.15 53.59 9.56 73.30 bend, 35 degrees nr 0.70 10.15 53.59 9.56 73.30 bend, 22.5 degrees nr 0.70 10.15 51.43 9.24 70.82 bend, 10 degrees nr 0.70 10.15 47.76 8.69 66.60 bend, 87.5 degrees, heel rest nr 0.70 10.15 79.32 13.42 102.89 bend, access rear, 87.5 degrees

nr 0.70 10.15 138.35 22.28 170.78

bend, access rear, 45 degrees nr 0.70 10.15 138.35 22.28 170.78 bend, access side, 87.5 degrees

nr 0.70 10.15 138.35 22.28 170.78

bend, access side, 45 degrees nr 0.70 10.15 138.35 22.28 170.78 bend, long radius, 87.5 degrees

nr 0.70 10.15 48.18 8.75 67.08

bend, long radius, 87.5 degrees, with heel rest

nr 0.70 10.15 84.04 14.13 108.32

branch, 150×100mm, 87.5 degrees

nr 0.90 13.05 89.63 15.40 118.08

branch, 150×100mm, 67.5 degrees

nr 0.90 13.05 91.49 15.68 120.22

branch, 150×100mm, 87.5 degrees, right-hand access

nr 0.90 13.05 87.22 15.04 115.31

branch, 150×100mm, 45 degrees, right-hand access

nr 0.90 13.05 87.22 15.04 115.31

branch, 150×100mm, 87.5 degrees, rear access

nr 0.90 13.05 169.17 27.33 209.55

branch, 150×100mm, 45 degrees, rear access

nr 0.90 13.05 169.71 27.41 210.17

branch, 150×100mm, 87.5 degrees, left hand access

nr 0.90 13.05 169.52 27.39 209.96

socket ferrule with cap nr 0.50 7.25 57.08 9.65 73.98 blank cap plain nr 0.50 7.25 27.24 5.17 39.66 transitional pipe, socket for clayware

nr 0.60 8.70 48.64 8.60 65.94

UnitHours Hours £

Mat’ls £

O&P £

Total £

transitional pipe, socket for cast iron

nr 0.60 8.70 47.17 8.38 64.25

gulley trap plain, 150mm×87.5 degrees

nr 0.90 13.05 96.32 16.41 125.78

225mm diameter pipe laid straight m 1.10 15.95 137.93 23.08 176.96 laid vertically m 1.30 18.85 137.93 23.52 180.30 in lengths less than 3m m 1.50 21.75 142.04 24.57 188.36 Extra over for standard coupling nr 0.20 2.90 1.81 0.71 5.42 continuity clip for standard coupling

nr 0.15 2.18 1.62 0.57 4.36

bend, 87.5 degrees nr 1.00 14.50 191.86 30.95 237.31 bend, 45 degrees nr 1.00 14.50 191.86 30.95 237.31 bend, 22.5 degrees nr 1.00 14.50 191.86 30.95 237.31 bend, 10 degrees nr 1.00 14.50 191.86 30.95 237.31 bend, access rear, 87.5 degrees

nr 1.00 14.50 291.73 45.93 352.16

degrees

bend, access side, 45 degrees nr 1.00 14.50 282.98 44.62 342.10 branch, 225×100mm, 87.5 degrees

nr 1.20 17.40 239.91 38.60 295.91

branch, 225×100mm, 45 degrees

nr 1.20 17.40 239.91 38.60 295.91

branch, 225×150mm, 87.5 degrees

nr 1.20 17.40 251.12 40.28 308.80

branch, 225×150mm, 45 degrees

nr 1.20 17.40 251.12 40.28 308.80

branch, 225×225mm, 87.5 degrees

nr 1.20 17.40 272.65 43.51 333.56

branch, 225×225mm, 45 degrees

nr 1.20 17.40 272.65 43.51 333.56

branch, 225×100mm, 45 degrees, right-hand access

nr 1.20 17.40 349.43 55.02 421.85

branch, 225×150mm, 87.5 degrees, right-hand access

nr 1.20 17.40 359.74 56.57 433.71

UnitHours Hours £

Mat’ls £

O&P £

Total £

branch, 225×150mm, 45 degrees, right-hand access

nr 1.20 17.40 359.74 56.57 433.71

branch, 225×225mm, 87.5 degrees, right-hand access

nr 1.20 17.40 372.02 58.41 447.83

branch, 225×225mm, 45 degrees, right-hand access

nr 1.20 17.40 372.02 58.41 447.83

branch, 225×100mm, 45 degrees, rear access

nr 1.20 17.40 343.43 54.12 414.95

branch, 225×150mm, 87.5 degrees, rear access

nr 1.20 17.40 343.43 54.12 414.95

branch, 225×150mm, 45 degrees, rear access

nr 1.20 17.40 359.74 56.57 433.71

branch, 225×225mm, 87.5 degrees, rear access

nr 1.20 17.40 372.02 58.41 447.83

Gullies and traps

branch, 225×100mm, 87.5 degrees, left-hand access

nr 1.20 17.40 343.43 54.12 414.95

branch, 225×100mm, 45 degrees, left-hand access

nr 1.20 17.40 343.43 54.12 414.95

branch, 225×150mm, 87.5 degrees, left-hand access

nr 1.20 17.40 359.74 56.57 433.71

branch, 225×150mm, 45 degrees, left-hand access

nr 1.20 17.40 359.74 56.57 433.71

branch, 225×225mm, 87.5 degrees, left-hand access

nr 1.20 17.40 372.02 58.41 447.83

branch, 225×225mm, 45 degrees, left-hand access

nr 1.20 17.40 372.02 58.41 447.83

diminishing pipe 225-100mm nr 0.70 10.15 91.32 15.22 116.69 diminishing pipe 225-150mm nr 0.70 10.15 91.32 15.22 116.69 socket ferrule with cap nr 0.50 7.25 217.49 33.71 258.45 blank cap plain nr 0.50 7.25 80.99 13.24 101.48 transitional pipe, socket for clayware

nr 0.60 8.70 137.71 21.96 168.37

transitional pipe, socket for cast iron

nr 0.60 8.70 145.79 23.17 177.66

UnitHours Hours £

Mat’ls £

O&P £

Total £

Gulley trap plain, 100mm×87.5 degrees

nr 0.70 10.15 49.50 8.95 68.60

Gulley trap plain, 100mm×45 degrees

nr 0.70 10.15 55.16 9.80 75.11

Gulley trap plain, 150mm×87.5 degrees

nr 0.70 10.15 96.32 15.97 122.44

Gulley trap, 100mm×87.5 degrees, surface access

nr 0.70 10.15 91.13 15.19 116.47

Gulley trap, 100mm×87.5 nr 0.70 10.15 76.15 12.95 99.25

double access, 100×87.5 degrees

Gulley trap running, 150mm double access, 150×87.5 degrees

nr 0.90 13.05 302.48 47.33 362.86

Gulley trap running, 150mm double access, 225×87.5 degrees

nr 0.90 13.05 328.72 51.27 393.04

Gulley inlet plain nr 0.90 13.05 47.24 9.04 69.33 Gulley inlet, 100×100mm with horizontal branch

nr 0.90 13.05 54.70 10.16 77.91

Gulley inlet, 100×100mm with vertical branch

nr 0.90 13.05 55.51 10.28 78.84

Raising piece, plain, 100×75mm

nr 0.40 5.80 38.62 6.66 51.08

Raising piece, plain, 100×150mm

nr 0.40 5.80 41.40 7.08 54.28

Raising piece, plain, 100×225mm

nr 0.40 5.80 43.59 7.41 56.80

Raising piece, plain, 100×300mm

nr 0.40 5.80 48.78 8.19 62.77

Notched grate, 200mm nr 0.10 1.45 5.14 0.99 7.58 Plain grate, 200mm nr 0.10 1.45 4.71 0.92 7.08 Solid cover, 200mm nr 0.20 2.90 6.86 1.46 11.22 Hinged and locking grate, 200mm

nr 0.25 3.63 27.83 4.72 36.17

Sealed plate and frame, 200mm

nr 0.25 3.63 28.89 4.88 37.39

Trapless gulley, 87.5 degrees× 100mm

nr 2.00 29.00 26.30 8.30 63.60

UnitHoursHours £

Mat’ls £

O&P £

Total £

Dean’s trap, 87.5 degrees× 100mm with galvanised

nr 3.00 43.50 129.89 26.01 199.40

degrees×100mm with galvanised sediment pan

Gulley trap with square top, 87.5 degrees×100mm outlet with galvanised sediment pan and grate

nr 2.70 39.15 198.71 35.68 273.54

Garage gulley 300×600mm, 87.5 degrees×100mm outlet with galvanised sediment pan and grate

nr 2.80 40.60 392.04 64.90 497.54

Garage gulley 300×600mm, 45 degrees×100mm outlet with galvanised sediment pan and grate

nr 2.80 40.60 392.04 64.90 497.54

Rainwater shoe with 100mm horizontal outlet

nr 0.80 11.60 78.98 13.59 104.17

Copper pipe, lead-free pre-soldered capillary joints and fittings, clips at 1250mm maximum centres

UnitHours Hours £

Mat’ls £

O&P £

Total £

8mm diameter, to timber m 0.20 2.90 1.21 0.62 4.73 8mm diameter, plugged and screwed

m 0.22 3.19 1.49 0.70 5.38

extra over for straight coupling nr 0.18 2.61 1.01 0.54 4.16 reduced coupling, 8×6mm nr 0.18 2.61 3.65 0.94 7.20 straight female connector, 8mm×1/4in

nr 0.18 2.61 3.86 0.97 7.44

straight male connector, 8mm×1/4in

nr 0.18 2.61 2.59 0.78 5.98

reducer, 8×6mm nr 0.18 2.61 2.91 0.83 6.35 elbow, 8mm nr 0.18 2.61 2.19 0.72 5.52 street elbow, 8mm nr 0.18 2.61 2.99 0.84 6.44 equal tee, 8mm nr 0.22 3.19 3.50 1.00 7.69 stop end, 8mm nr 0.18 2.61 3.17 0.87 6.65 10mm diameter, to timber m 0.20 2.90 1.42 0.65 4.97 10mm diameter, plugged and screwed

m 0.22 3.19 1.69 0.73 5.61

extra over for straight coupling nr 0.18 2.61 0.52 0.47 3.60 reduced coupling, 10×8mm nr 0.18 2.61 3.20 0.87 6.68 reducer, 10×8mm nr 0.18 2.61 2.24 0.73 5.58 elbow, 10mm nr 0.18 2.61 0.89 0.53 4.03 street elbow, 10mm nr 0.18 2.61 2.60 0.78 5.99 equal tee, 10mm nr 0.22 3.19 2.03 0.78 6.00 elbow, 10mm nr 0.18 2.61 1.71 0.65 4.97

UnitHours Hours £

Mat’ls £

O&P £

Total £

15mm diameter, to timber m 0.20 2.90 1.71 0.69 5.30 15mm diameter, plugged and screwed

m 0.22 3.19 1.97 0.77 5.93

extra over for reduced coupling, 15×8mm nr 0.18 2.61 2.27 0.73 5.61 reduced coupling, 15×10mm nr 0.18 2.61 2.21 0.72 5.54 reduced coupling, 15×12mm nr 0.18 2.61 1.68 0.64 4.93 adaptor coupling, 15mm× 1/2in

nr 0.18 2.61 2.59 0.78 5.98

straight female connector, 15mm×1/2in

nr 0.18 2.61 2.72 0.80 6.13

female reducing connector, 15mm×3/8in

nr 0.18 2.61 5.42 1.20 9.23

female reducing connector, 15mm×1/4in

nr 0.18 2.61 4.83 1.12 8.56

straight male connector, 15mm×1/2in

nr 0.18 2.61 2.33 0.74 5.68

male reducing connector, 15mm×3/4in

nr 0.18 2.61 3.16 0.87 6.64

tank connector, 15mm×1/2in nr 0.18 2.61 5.78 1.26 9.65 reducer, 15×8mm nr 0.18 2.61 1.86 0.67 5.14 reducer, 15×10mm nr 0.18 2.61 0.73 0.50 3.84 reducer, 15×12mm nr 0.18 2.61 1.46 0.61 4.68 female adaptor, 15×1/2in nr 0.18 2.61 4.68 1.09 8.38 male adaptor, 15×1/2in nr 0.18 2.61 4.78 1.11 8.50 adaptor, 15×1/2in nr 0.18 2.61 2.27 0.73 5.61 male elbow, 15mm×1/2in nr 0.18 2.61 4.63 1.09 8.33 reducing male elbow, 15mm ×3/8in

nr 0.18 2.61 6.52 1.37 10.50

female elbow, 15mm×1/2in nr 0.18 2.61 4.00 0.99 7.60 reducing female elbow, 15mm ×1/4in

nr 0.18 2.61 6.38 1.35 10.34

backplate elbow, 15mm× nr 0.18 2.61 10.29 1.94 14.84

flanged bend, 15mm×3/4in nr 0.18 2.61 10.89 2.03 15.53 slow bend nr 0.18 2.61 0.78 0.51 3.90 return bend nr 0.18 2.61 7.27 1.48 11.36 obtuse elbow nr 0.18 2.61 0.93 0.53 4.07

UnitHours Hours £

Mat’ls £

O&P £

Total £

tee, reduced branch largest end 15mm

nr 0.22 3.19 8.77 1.79 13.75

tee, both ends reduced, largest end 15mm

nr 0.22 3.19 8.18 1.71 13.08

sweep tee, 90 degrees, 15mm nr 0.22 3.19 8.20 1.71 13.10 offset tee, 15mm nr 0.22 3.19 10.84 2.10 16.13 double sweep tee, 15mm nr 0.22 3.19 9.27 1.87 14.33 cross equal tee, 15mm nr 0.22 3.19 12.27 2.32 17.78 stop end, 15mm nr 0.18 2.61 3.17 0.87 6.65 tap connector, 15mm nr 0.18 2.61 3.61 0.93 7.15 bent union adaptor, 15mm× 3/4in

nr 0.18 2.61 8.03 1.60 12.24

bent male union connector, 15mm×1/2in

nr 0.18 2.61 9.45 1.81 13.87

bent female union connector, 15mm×1/2in

nr 0.18 2.61 9.45 1.81 13.87

made bend nr 0.18 2.61 0.00 0.39 3.00 22mm diameter, to timber m 0.22 3.19 2.68 0.88 6.75 22mm diameter, plugged and screwed

m 0.24 3.48 2.91 0.96 7.35

extra over for straight coupling nr 0.20 2.90 3.21 0.92 7.03 reduced coupling, 22×8mm nr 0.20 2.90 3.21 0.92 7.03 reduced coupling, 22×10mm nr 0.20 2.90 3.21 0.92 7.03 reduced coupling, 22×15mm nr 0.20 2.90 2.16 0.76 5.82 straight female connector, 22mm×3/4in

nr 0.20 2.90 3.94 1.03 7.87

female reducing connector, nr 0.20 2.90 6.26 1.37 10.53

22mm×3/4in

male reducing connector, 22mm×1/2in

nr 0.20 2.90 6.48 1.41 10.79

UnitHours Hours £

Mat’ls £

O&P £

Total £

tank connector, 22mm×1in nr 0.20 2.90 8.81 1.76 13.47 reducer, 22×12mm nr 0.20 2.90 3.33 0.93 7.16 female adaptor, 22×3/4in nr 0.20 2.90 8.81 1.76 13.47 male adaptor, 22×3/4in nr 0.20 2.90 6.10 1.35 10.35 adaptor, 22×3/4in nr 0.20 2.90 2.51 0.81 6.22 street elbow, 22mm nr 0.20 2.90 1.98 0.73 5.61 male elbow, 22mm×3/4in nr 0.20 2.90 6.57 1.42 10.89 female elbow, 22mm×3/4in nr 0.20 2.90 5.78 1.30 9.98 reducing female elbow, 22mm ×1/2in

nr 0.20 2.90 6.68 1.44 11.02

backplate elbow, 22mm× 3/4in

nr 0.20 2.90 10.42 2.00 15.32

flanged bend, 22mm×3/4in nr 0.20 2.90 11.99 2.23 17.12 overflow bend, 22mm×3/4in nr 0.20 2.90 14.69 2.64 20.23 slow bend nr 0.20 2.90 1.53 0.66 5.09 return bend nr 0.20 2.90 14.29 2.58 19.77 obtuse elbow nr 0.20 2.90 1.94 0.73 5.57 tee, reduced branch largest end 22mm

nr 0.24 3.48 6.39 1.48 11.35

tee, both ends reduced, largest end 22mm

nr 0.24 3.48 2.76 0.94 7.18

corner tee, 22mm nr 0.24 3.48 13.31 2.52 19.31 sweep tee, 90 degrees, 22mm nr 0.24 3.48 10.56 2.11 16.15 offset tee, 22mm nr 0.24 3.48 13.05 2.48 19.01 double sweep tee, 22mm nr 0.24 3.48 12.62 2.42 18.52 cross equal tee, 22mm nr 0.24 3.48 13.71 2.58 19.77 stop end, 22mm nr 0.20 2.90 2.23 0.77 5.90 tap connector, 22mm×1/2 in nr 0.20 2.90 9.27 1.83 14.00 bent tap connector, 22mm× nr 0.20 2.90 11.30 2.13 16.33

3/4in

bent union adaptor, 22mm× 1in

nr 0.20 2.90 7.54 1.57 12.01

bent male union connector, 22mm×3/4in

nr 0.20 2.90 9.28 1.83 14.01

UnitHours Hours £

Mat’ls £

O&P £

Total £

bent female union connector, 22mm×3/4in

nr 0.20 2.90 12.30 2.28 17.48

made bend nr 0.20 2.90 0.00 0.44 3.34 28mm diameter, to timber m 0.23 3.34 3.80 1.07 8.21 28mm diameter, plugged and screwed

m 0.25 3.63 4.05 1.15 8.83

extra over for straight coupling nr 0.24 3.48 1.11 0.69 5.28 reduced coupling, 28×15mm nr 0.24 3.48 4.94 1.26 9.68 reduced coupling, 28×22mm nr 0.24 3.48 3.02 0.98 7.48 adaptor coupling, 28mm× 1in nr 0.24 3.48 4.48 1.19 9.15 straight female connector, 28mm×1in

nr 0.24 3.48 7.42 1.64 12.54

straight male connector, 28mm×1in

nr 0.24 3.48 6.65 1.52 11.65

male reducing connector, 28mm×3/4in

nr 0.24 3.48 10.20 2.05 15.73

tank connector, 28mm×1in nr 0.24 3.48 11.58 2.26 17.32 tank connector, 28mm× 1in nr 0.24 3.48 11.58 2.26 17.32 reducer, 28×15mm nr 0.24 3.48 2.44 0.89 6.81 reducer, 28×22mm nr 0.24 3.48 1.86 0.80 6.14 female adaptor, 28mm×1in nr 0.24 3.48 10.05 2.03 15.56 male adaptor, 28mm×1in nr 0.24 3.48 10.18 2.05 15.71 adaptor, 28mm×1in nr 0.24 3.48 3.56 1.06 8.10 reducing elbow, 28×22mm nr 0.24 3.48 8.62 1.82 13.92 street elbow, 28mm nr 0.24 3.48 5.78 1.39 10.65 male elbow, 28mm×1in nr 0.24 3.48 9.88 2.00 15.36

return bend nr 0.24 3.48 18.26 3.26 25.00 obtuse elbow nr 0.24 3.48 3.73 1.08 8.29 equal tee, 28mm nr 0.24 3.48 4.91 1.26 9.65

UnitHours Hours £

Mat’ls £

O&P £

Total £

tee, reduced branch largest end 28mm

nr 0.28 4.06 7.26 1.70 13.02

tee, one end and one branch reduced, largest end 28mm

nr 0.28 4.06 9.07 1.97 15.10

tee, both ends reduced, largest end 28mm

nr 0.28 4.06 18.72 3.42 26.20

sweep tee, 90 degrees, 28mm nr 0.28 4.06 17.76 3.27 25.09 double sweep tee, 28mm nr 0.28 4.06 19.18 3.49 26.73 cross equal tee, 28mm nr 0.28 4.06 19.66 3.56 27.28 stop end, 28mm nr 0.24 3.48 3.98 1.12 8.58 bent male union connector, 28mm×1in

nr 0.24 3.48 17.58 3.16 24.22

bent female union connector, 28mm×1in

nr 0.24 3.48 17.58 3.16 24.22

made bend nr 0.24 3.48 0.00 0.52 4.00 35mm diameter, to timber m 0.28 4.06 4.22 1.24 9.52 35mm diameter, plugged and screwed

m 0.30 4.35 4.48 1.32 10.15

extra over for straight coupling nr 0.26 3.77 3.59 1.10 8.46 reduced coupling, 35×22mm nr 0.26 3.77 6.98 1.61 12.36 reduced coupling, 35×28mm nr 0.26 3.77 7.12 1.63 12.52 adaptor coupling, 35mm× 1 1/4in

nr 0.26 3.77 7.49 1.69 12.95

flanged connector nr 0.26 3.77 54.60 8.76 67.13 straight female connector, 35mm×1 1/4in

nr 0.26 3.77 12.55 2.45 18.77

straight male connector, 35mm×1 1/4in

nr 0.26 3.77 11.72 2.32 17.81

reducer, 35×15mm nr 0.26 3.77 7.28 1.66 12.71 reducer, 35×22mm nr 0.26 3.77 6.92 1.60 12.29 reducer, 35×28mm nr 0.26 3.77 5.13 1.34 10.24

UnitHours Hours £

Mat’ls £

O&P £

Total £

female adaptor, 35mm× 1 1/4in

nr 0.26 3.77 18.18 3.29 25.24

male adaptor, 35mm× 1 1/4in nr 0.26 3.77 14.85 2.79 21.41 adaptor, 35mm×1 1/4in nr 0.26 3.77 4.16 1.19 9.12 elbow, 35mm nr 0.26 3.77 7.70 1.72 13.19 street elbow, 35mm nr 0.26 3.77 12.95 2.51 19.23 male elbow, 35mm x 1 1/4in nr 0.26 3.77 13.97 2.66 20.40 female elbow, 35mm× 1 1/4in nr 0.26 3.77 15.49 2.89 22.15 equal tee, 35mm nr 0.30 4.35 12.53 2.53 19.41 tee, reduced branch largest end 35mm

nr 0.30 4.35 16.47 3.12 23.94

tee, one end and one branch reduced, largest end 35mm

nr 0.30 4.35 20.74 3.76 28.85

tee, both ends reduced, largest end 35mm

nr 0.30 4.35 26.19 4.58 35.12

sweep tee, 90 degrees, 35mm nr 0.30 4.35 25.18 4.43 33.96 stop end, 35mm nr 0.26 3.77 8.79 1.88 14.44 bent male union adaptor, 35mm×1 1/4in

nr 0.26 3.77 28.67 4.87 37.31

bent female union adaptor, 35mm×1 1/4in

nr 0.26 3.77 28.67 4.87 37.31

made bend nr 0.26 3.77 0.00 0.57 4.34 42mm diameter, to timber m 0.30 4.35 9.28 2.04 15.67 42mm diameter, plugged and screwed

m 0.32 4.64 9.48 2.12 16.24

extra over for straight coupling nr 0.28 4.06 5.99 1.51 11.56 reduced coupling, 42×28mm nr 0.28 4.06 11.91 2.40 18.37 reduced coupling, 42×35mm nr 0.28 4.06 10.46 2.18 16.70

UnitHours Hours £

Mat’ls £

O&P £

Total £

flanged connector nr 0.28 4.06 65.26 10.40 79.72 straight female connector, 42mm×1 1/2in

nr 0.28 4.06 16.68 3.11 23.85

straight male connector, 42mm×1 1/2in

nr 0.28 4.06 15.08 2.87 22.01

tank connector, 42mm× 1 1/2in

nr 0.28 4.06 19.46 3.53 27.05

reducer, 42×15mm nr 0.28 4.06 11.18 2.29 17.53 reducer, 42×22mm nr 0.28 4.06 12.48 2.48 19.02 reducer, 42×28mm nr 0.28 4.06 11.76 2.37 18.19 reducer, 42×35mm nr 0.28 4.06 9.66 2.06 15.78 female adaptor, 42mm× 1 1/2in

nr 0.28 4.06 22.90 4.04 31.00

male adaptor, 42mm× 1 1/2in nr 0.28 4.06 20.52 3.69 28.27 adaptor, 42mm×1 1/2in nr 0.28 4.06 5.48 1.43 10.97 elbow, 42mm nr 0.28 4.06 12.72 2.52 19.30 street elbow, 42mm nr 0.28 4.06 18.24 3.35 25.65 male elbow, 42mm×1 1/2in nr 0.28 4.06 16.61 3.10 23.77 equal tee, 42mm nr 0.32 4.64 20.10 3.71 28.45 tee, reduced branch largest end 42mm

nr 0.32 4.64 37.92 6.38 48.94

tee, one end and one branch reduced, largest end 42mm

nr 0.32 4.64 35.47 6.02 46.13

tee, both ends reduced, largest end 42mm

nr 0.32 4.64 26.19 4.62 35.45

sweep tee, 90 degrees, 42mm nr 0.32 4.64 37.33 6.30 48.27 stop end, 42mm nr 0.28 4.06 15.13 2.88 22.07 bent male union adaptor, 42mm×1 1/2in

nr 0.28 4.06 46.64 7.61 58.31

bent female union adaptor, 42mm×1 1/2in

nr 0.28 4.06 46.64 7.61 58.31

made bend nr 0.28 4.06 0.00 0.61 4.67

54mm diameter, to timber m 0.32 4.64 13.10 2.66 20.40 54mm diameter, plugged and screwed

m 0.34 4.93 13.51 2.77 21.21

extra over for straight coupling nr 0.30 4.35 11.05 2.31 17.71 reduced coupling, 54×35mm nr 0.30 4.35 18.33 3.40 26.08 reduced coupling, 54×42mm nr 0.30 4.35 19.99 3.65 27.99 straight female connector, 54mm×2in

nr 0.30 4.35 26.45 4.62 35.42

straight male connector, 54mm×2in

nr 0.30 4.35 22.91 4.09 31.35

tank connector, 54mm×2in nr 0.30 4.35 29.73 5.11 39.19 reducer, 54×15mm nr 0.30 4.35 24.68 4.35 33.38 reducer, 54×22mm nr 0.30 4.35 24.18 4.28 32.81 reducer, 54×28mm nr 0.30 4.35 21.26 3.84 29.45 reducer, 54×35mm nr 0.30 4.35 20.27 3.69 28.31 reducer, 54×42mm nr 0.30 4.35 17.49 3.28 25.12 female adaptor, 54mm×2in nr 0.30 4.35 27.57 4.79 36.71 male adaptor, 54mm×2in nr 0.30 4.35 27.57 4.79 36.71 adaptor, 54mm×2in nr 0.30 4.35 12.00 2.45 18.80 elbow, 54mm nr 0.30 4.35 12.94 2.59 19.88 male elbow, 54mm×2in nr 0.30 4.35 26.25 4.59 35.19 equal tee, 54mm nr 0.34 4.93 29.38 5.15 39.46 tee, reduced branch largest end 54mm

nr 0.34 4.93 40.51 6.82 52.26

tee, one end and one branch reduced, largest end 54mm

nr 0.34 3.72 60.87 9.69 74.28

sweep tee, 90 degrees, 54mm nr 0.34 3.72 53.78 8.62 66.12 stop end, 54mm nr 0.34 3.72 41.36 6.76 51.84 bent union adaptor, 54mm× 54mm×2in

nr 0.34 4.93 21.12 3.91 29.96

bent male union adaptor, 54mm×2in

nr 0.34 4.93 73.66 11.79 90.38

bent female union adaptor, 54mm×2in

nr 0.34 4.93 73.66 11.79 90.38

UnitHoursHours £

Mat’ls £

O&P £

Total £

Gunmetal stop valve with brass headwork, copper×copper

15mm nr 0.20 2.90 5.03 1.19 9.12 22mm nr 0.22 3.19 9.39 1.89 14.47 28mm nr 0.28 4.06 26.67 4.61 35.34 Dezincification-resistant stop valve, copper×copper

15mm nr 0.20 2.90 12.62 2.33 17.85 22mm nr 0.22 3.19 21.88 3.76 28.83 28mm nr 0.28 4.06 36.45 6.08 46.59 Gunmetal stop valve, copper× copper

35mm nr 0.32 4.64 57.17 9.27 71.08 42mm nr 0.35 5.08 75.92 12.15 93.14 54mm nr 0.42 6.09 113.41 17.93 137.43 Gunmetal lockshield stop valve with brass headwork, copper× copper

22mm nr 0.22 3.19 14.50 2.65 20.34 28mm nr 0.28 4.06 26.59 4.60 35.25 Gunmetal union stop valve with brass headwork, copper×copper union

15mm nr 0.20 2.90 14.19 2.56 19.65 22mm nr 0.22 3.19 20.84 3.60 27.63 Gunmetal double union lockshield stop valve with brass headwork, copper×copper union

15mm nr 0.20 2.90 16.68 2.94 22.52 22mm nr 0.22 3.19 22.91 3.92 30.02

Gate valves

UnitHoursHours £

Mat’ls £

O&P £

Total £

Dezincification-resistant double union lockshield stop valve, copper×copper

15mm nr 0.20 2.90 26.85 4.46 34.21 22mm nr 0.22 3.19 32.68 5.38 41.25 28mm nr 0.28 4.06 60.43 9.67 74.16 Dezincification-resistant double union stop valve with easy-clean cover, copper×copper

15mm nr 0.20 2.90 28.39 4.69 35.98 22mm nr 0.22 3.19 35.43 5.79 44.41 28mm nr 0.28 4.06 65.89 10.49 80.44 Gunmetal double union stop valve with easy-clean cover, copper× copper

35mm nr 0.35 5.08 100.66 15.86 121.60 42mm nr 0.42 6.09 138.16 21.64 165.89 54mm nr 0.46 6.67 217.34 33.60 257.61 Combined gunmetal stop valve and draincock with brass headwork, copper×copper

15mm nr 0.20 2.90 27.99 4.63 35.52 22mm nr 0.22 3.19 34.39 5.64 43.22

Gunmetal fullway gate valve, copper×copper

15mm nr 0.20 2.90 15.74 2.80 21.44 22mm nr 0.22 3.19 18.24 3.21 24.64 28mm nr 0.28 4.06 25.39 4.42 33.87

Plug cocks

Valves

54mm nr 0.42 6.09 102.74 16.32 125.15

UnitHours Hours £

Mat’ls £

O&P £

Total £

Nited 15mm nr 0.20 2.90 11.68 2.19 16.77 22mm nr 0.20 2.90 17.58 3.07 23.55 Nited with drop head 15mm nr 0.25 3.63 13.27 2.53 19.43 Nited with union outlet 15mm nr 0.25 3.63 13.55 2.58 19.75 22mm nr 0.25 3.63 20.57 3.63 27.82 Nited union stopcock with drop head

15mm nr 0.25 3.63 15.36 2.85 21.83 22mm nr 0.25 3.63 22.14 3.86 29.63

Radiator valve, plain finish, compression inlet×taper male union outlet

8mm×1/2in nr 0.30 4.35 16.94 3.19 24.48 10mm×1/2in nr 0.30 4.35 18.44 3.42 26.21 Radiator valve, chromium plated, compression inlet×taper male union outlet

8mm×1/2in nr 0.30 4.35 20.58 3.74 28.67 10mm×1/2in nr 0.30 4.35 22.62 4.05 31.02 Radiator valve, plain finish, compression inlet×taper male union outlet

8mm×1/2in nr 0.30 4.35 6.60 1.64 12.59 10mm×1/2in nr 0.30 4.35 6.60 1.64 12.59

Copper pipe, dezincification-resistant compression joints and fittings, clips at 1250mm maximum centres

Radiator valve, nickel plated, compression inlet×taper male union outlet

8mm×1/2in nr 0.30 4.35 6.82 1.68 12.85 10mm×1/2in nr 0.30 4.35 6.82 1.68 12.85

15mm diameter, to timber m 0.26 3.77 1.72 0.82 6.31 15mm diameter, plugged and screwed m 0.28 4.06 1.96 0.90 6.92 extra over for male coupling, 15mm×3/4in nr 0.18 1.97 4.88 1.03 7.88 tank coupling with backnut, 15mm×1/2in nr 0.18 2.61 5.70 1.25 9.56 female coupling, 15mm× 3/4in nr 0.18 2.61 4.39 1.05 8.05 male elbow, 15mm×1/2in nr 0.18 2.61 3.70 0.95 7.26 male elbow, BSP parallel thread, 15mm×1/2in

nr 0.18 2.61 3.70 0.95 7.26

female elbow, 15mm×1/2in nr 0.18 2.61 3.95 0.98 7.54 female elbow, 15mm×3/4in nr 0.18 2.61 7.10 1.46 11.17 female wall elbow, 15mm× 1/2in nr 0.18 2.61 5.76 1.26 9.63 tee with reduced branch, 15×15×12mm nr 0.22 3.19 7.34 1.58 12.11 tee, end reduced 15×12× 12mm nr 0.22 3.19 5.24 1.26 9.69 tee, end and branch reduced, 15×12×12mm nr 0.22 3.19 6.07 1.39 10.65 tee, both ends reduced, 15×15×18mm nr 0.22 3.19 10.44 2.04 15.67 tee, both ends reduced, 15×15×22mm nr 0.22 3.19 8.20 1.71 13.10 female tee, 15mm×1/2in× 15mm nr 0.22 3.19 7.48 1.60 12.27

UnitHours Hours £

Mat’ls £

O&P £

Total £

male tee, 15mm×1/2in× 15mm

nr 0.22 3.19 8.57 1.76 13.52

cross tee, 15mm nr 0.22 3.19 10.07 1.99 15.25 straight swivel connector, nr 0.18 2.61 6.49 1.37 10.47

×1/2in

18mm diameter, to timber m 0.21 3.05 2.45 0.82 6.32 18mm diameter, plugged and screwed

m 0.23 3.34 2.71 0.91 6.95

extra over for straight coupling, 18mm nr 0.18 2.61 4.97 1.14 8.72 male coupling, 18mm×1/2in nr 0.18 2.61 4.02 0.99 7.62 female coupling, 18mm× 1/2in

nr 0.18 2.61 4.39 1.05 8.05

elbow, 18mm nr 0.18 2.61 5.45 1.21 9.27 male elbow, 18mm×1/2in nr 0.18 2.61 5.45 1.21 9.27 female elbow, 18mm×1/2 in nr 0.18 2.61 6.23 1.33 10.17 tee, 18mm nr 0.22 3.19 7.83 1.65 12.67 tee with reduced branch, 18×15×12mm

nr 0.22 3.19 7.34 1.58 12.11

tee with reduced branch, 18×18×15mm

nr 0.22 3.19 9.41 1.89 14.49

tee, end reduced 18×12× 18mm

nr 0.22 3.19 10.28 2.02 15.49

tee, end reduced 18×15× 18mm

nr 0.22 3.19 9.41 1.89 14.49

tee, end and branch reduced, 18×12×12mm

nr 0.22 3.19 9.41 1.89 14.49

tee, end and branch reduced, 18×15×12mm

nr 0.22 3.19 9.41 1.89 14.49

tee, end and branch reduced, 18×15×12mm

nr 0.22 3.19 9.23 1.86 14.28

reducing set, 18×12mm nr 0.18 2.61 2.43 0.76 5.80 reducing set, 18×15mm nr 0.18 2.61 2.43 0.76 5.80

UnitHours Hours £

Mat’ls £

O&P £

Total £

22mm diameter, to timber m 0.22 3.19 2.81 0.90 6.90 22mm diameter, plugged and screwed

m 0.24 3.48 3.12 0.99 7.59

tank coupling with backnut, 22mm×3/4in

nr 0.18 2.61 6.09 1.31 10.01

tank coupling with backnut, 22mm×1in

nr 0.18 2.61 10.14 1.91 14.66

female coupling, 22mm× 1/2in

nr 0.18 2.61 4.39 1.05 8.05

female coupling, 22mm× 1in nr 0.18 2.61 6.36 1.35 10.32 male elbow, 22mm×3/4in nr 0.18 2.61 4.13 1.01 7.75 male elbow, 22mm×1in nr 0.18 2.61 8.44 1.66 12.71 male elbow, BSP parallel thread, 22mm×3/4in

nr 0.18 2.61 4.13 1.01 7.75

male elbow, BSP parallel thread, 22mm×1in

nr 0.18 2.61 8.44 1.66 12.71

female elbow, 22mm×3/4in nr 0.18 2.61 5.70 1.25 9.56 female elbow, 22mm×1in nr 0.18 2.61 9.14 1.76 13.51 female wall elbow, 22mm× 3/4in

nr 0.18 2.61 10.86 2.02 15.49

tee with reduced branch, 22×22×12mm

nr 0.22 3.19 10.93 2.12 16.24

tee with reduced branch, 22×22×15mm

nr 0.22 3.19 7.90 1.66 12.75

tee, end reduced 22×15× 22mm

nr 0.22 3.19 9.18 1.86 14.23

tee, end and branch reduced, 22×15×15mm

nr 0.22 3.19 8.64 1.77 13.60

tee, both ends reduced, 22×22×28mm

nr 0.22 3.19 13.76 2.54 19.49

female tee, 22mm×1/2in× 22mm

nr 0.22 3.19 9.42 1.89 14.50

female tee, 22mm×3/4in× 22mm

nr 0.22 3.19 9.60 1.92 14.71

male end tee, 22mm×3/4in× 22mm

nr 0.22 3.19 12.11 2.30 17.60

straight swivel connector, 22mm×3/4in

nr 0.18 2.61 7.10 1.46 11.17

bent swivel connector, 22mm ×3/4in

nr 0.18 2.61 8.56 1.68 12.85

male adaptor, 22mm×1/2in nr 0.18 2.61 5.52 1.22 9.35 male adaptor, 22mm×3/4in nr 0.18 2.61 5.52 1.22 9.35 female adaptor, 22mm×1/2in nr 0.18 2.61 5.52 1.22 9.35 female adaptor, 22mm×3/4in nr 0.18 2.61 4.00 0.99 7.60 reducing set, 22×12mm nr 0.18 2.61 2.98 0.84 6.43 reducing set, 22×15mm nr 0.18 2.61 2.23 0.73 5.57 reducing set, 22×18mm nr 0.18 2.61 2.56 0.78 5.95 28mm diameter, to timber m 0.23 3.34 3.46 1.02 7.81 28mm diameter, plugged and screwed

m 0.25 3.63 3.70 1.10 8.42

extra over for straight coupling, 28mm nr 0.20 2.90 6.54 1.42 10.86 male coupling, 28mm×3/4in nr 0.20 2.90 6.81 1.46 11.17 tank coupling with backnut, 28mm×1in

nr 0.20 2.90 10.46 2.00 15.36

female coupling, 28mm× 1in nr 0.20 2.90 6.01 1.34 10.25 elbow, 28mm nr 0.20 2.90 8.46 1.70 13.06 male elbow, 28mm×1in nr 0.20 2.90 8.44 1.70 13.04 male elbow, BSP parallel thread, 28mm×1in

nr 0.20 2.90 7.74 1.60 12.24

female elbow, 28mm×1in nr 0.20 2.90 9.44 1.85 14.19 tee, 28mm nr 0.24 3.48 13.48 2.54 19.50 tee with reduced branch, 28×28×15mm

nr 0.24 3.48 13.02 2.48 18.98

tee with reduced branch, 28×28×22mm

nr 0.24 3.48 13.02 2.48 18.98

tee, end reduced 28×28× 15mm

nr 0.24 3.48 15.06 2.78 21.32

tee, end reduced 28×28× 22mm

nr 0.24 3.48 14.27 2.66 20.41

tee, both ends reduced, 28×28×22mm

nr 0.24 3.48 14.12 2.64 20.24

female tee, 28mm×1/2in× 28mm

nr 0.24 3.48 15.70 2.88 22.06

female tee, 28mm×1in× 28mm

nr 0.24 3.48 15.70 2.88 22.06

female adaptor, 28mm×1in nr 0.20 2.90 9.08 1.80 13.78 reducing set, 28×15mm nr 0.20 2.19 3.33 0.83 6.35 reducing set, 28×22mm nr 0.20 2.19 3.33 0.83 6.35 stop end, 28mm nr 0.20 2.19 6.84 1.35 10.38 35mm diameter, to timber m 0.28 4.06 7.27 1.70 13.03 35mm diameter, plugged and screwed

m 0.30 4.35 7.51 1.78 13.64

extra over for straight coupling, 35mm nr 0.26 3.77 13.60 2.61 19.98 male coupling, 35mm× 1in nr 0.26 3.77 16.84 3.09 23.70 male coupling, 35mm× 1 1/4in

nr 0.26 3.77 10.33 2.12 16.22

tank coupling with backnut, 35mm×1 1/4in

nr 0.26 3.77 12.44 2.43 18.64

female coupling, 35mm× 1 1/4in

nr 0.26 3.77 12.41 2.43 18.61

elbow, 35mm nr 0.26 3.77 18.35 3.32 25.44 male elbow, 35mm×1 1/4in nr 0.26 3.77 17.07 3.13 23.97 female elbow, 35mm×1 1/4in nr 0.26 3.77 16.30 3.01 23.08 tee, 35mm nr 0.30 4.35 23.89 4.24 32.48 tee with reduced branch, 35×35×15mm

nr 0.30 4.35 23.34 4.15 31.84

tee with reduced branch, 35×35×22mm

nr 0.30 4.35 23.34 4.15 31.84

tee with reduced branch, 35×35×28mm

nr 0.30 4.35 23.34 4.15 31.84

reducing set, 35×15mm nr 0.26 3.77 5.71 1.42 10.90

reducing set, 35×22mm nr 0.26 3.77 5.71 1.42 10.90 reducing set, 35×28mm nr 0.26 3.77 5.71 1.42 10.90 tank connector, 35mm nr 0.26 3.77 8.24 1.80 13.81 stop end, 35mm nr 0.26 3.77 10.54 2.15 16.46 42mm diameter, to timber m 0.30 4.35 9.14 2.02 15.51 42mm diameter, plugged and screwed

m 0.32 4.64 9.38 2.10 16.12

extra over for straight coupling, 42mm nr 0.28 4.06 17.88 3.29 25.23 male coupling, 42mm× 1 1/2in

nr 0.28 4.06 15.15 2.88 22.09

tank coupling with backnut, 42mm×1 1/2in

nr 0.28 4.06 16.73 3.12 23.91

female coupling, 42mm× 1 1/2in

nr 0.28 4.06 16.70 3.11 23.87

elbow, 42mm nr 0.28 4.06 24.86 4.34 33.26 male elbow, 42mm×1 1/2in nr 0.28 4.06 25.05 4.37 33.48 female elbow, 42mm×1 1/2in nr 0.28 4.06 25.06 4.37 33.49 tee, 42mm nr 0.32 4.64 37.54 6.33 48.51 tee with reduced branch, 42×42×22mm

nr 0.32 4.64 36.07 6.11 46.82

tee with reduced branch, 42×42×28mm

nr 0.32 4.64 36.07 6.11 46.82

reducing set, 42×15mm nr 0.28 4.06 10.41 2.17 16.64 reducing set, 42×22mm nr 0.28 4.06 9.02 1.96 15.04 reducing set, 42×28mm nr 0.28 4.06 9.02 1.96 15.04 reducing set, 42mm×35mm nr 0.28 4.06 9.02 1.96 15.04 stop end, 42mm nr 0.28 4.06 17.54 3.24 24.84

UnitHours Hours £

Mat’ls £

O&P £

Total £

54mm diameter, to timber m 0.32 4.64 11.36 2.40 18.40 54mm diameter, plugged and screwed

m 0.34 4.93 11.82 2.51 19.26

extra over for

Copper pipe, compression joints and fittings, clips at 1250mm centres

tank coupling with backnut, 54mm×2in

nr 0.30 4.35 24.90 4.39 33.64

female coupling, 54mm×2in nr 0.30 4.35 24.49 4.33 33.17 elbow, 54mm nr 0.30 4.35 42.79 7.07 54.21 male elbow, 54mm×2in nr 0.30 4.35 38.76 6.47 49.58 tee, 54mm nr 0.34 4.93 60.31 9.79 75.03 tee with reduced branch, 54×54×28mm

nr 0.34 4.93 60.31 9.79 75.03

reducing set, 54×22mm nr 0.30 4.35 17.28 3.24 24.87 reducing set, 54×28mm nr 0.30 4.35 17.28 3.24 24.87 reducing set, 54×35mm nr 0.30 4.35 15.05 2.91 22.31 reducing set, 54×42mm nr 0.30 4.35 15.05 2.91 22.31

15mm diameter, to timber m 0.20 2.90 1.64 0.68 5.22 15mm diameter, plugged and screwed m 0.22 3.19 1.92 0.77 5.88 extra over for bent union radiator, 15mm ×1/2in nr 0.18 2.61 6.54 1.37 10.52 air-release elbow, 15mm nr 0.18 2.61 8.44 1.66 12.71 slow bend, 15mm nr 0.18 2.61 8.24 1.63 12.48 male elbow, 15mm×1/2in nr 0.18 2.61 2.29 0.74 5.64 male elbow, 15mm×3/4in nr 0.18 2.61 6.99 1.44 11.04 male elbow, BSP parallel thread, 15mm×1/2in

nr 0.18 2.61 2.29 0.74 5.64

female elbow, 15mm×1/2in nr 0.18 2.61 3.52 0.92 7.05 offset tee, 15×15×15mm nr 0.18 2.61 15.19 2.67 20.47

UnitHours Hours £

Mat’ls £

O&P £

Total £

male adaptor, 15mm×1/2in nr 0.18 2.61 2.78 0.81 6.20 reducing set, 15×8mm nr 0.18 2.61 1.89 0.68 5.18 reducing set, 15×10mm nr 0.18 2.61 1.89 0.68 5.18 reducing set, 15×12mm nr 0.18 2.61 1.89 0.68 5.18

screwed

extra over for lead coupling, 22mm nr 0.18 2.61 3.64 0.94 7.19 air-release elbow, 22mm nr 0.18 2.61 11.17 2.07 15.85 slow bend, 22mm nr 0.18 2.61 13.28 2.38 18.27 male elbow, 22mm×3/4in nr 0.18 2.61 2.96 0.84 6.41 male elbow, 22mm×1in nr 0.18 2.61 5.79 1.26 9.66 male elbow, BSP parallel thread, 22mm×3/4in

nr 0.18 2.61 2.96 0.84 6.41

male elbow, BSP parallel thread, 22mm×1in

nr 0.18 2.61 5.79 1.26 9.66

female elbow, 22mm×3/4in nr 0.18 2.61 5.09 1.16 8.86 female elbow, 22mm×1in nr 0.18 2.61 7.92 1.58 12.11 bent cylinder connector, 22mm×1in

nr 0.18 2.61 11.64 2.14 16.39

tee with reduced branch, 22×22×15mm

nr 0.22 3.19 7.33 1.58 12.10

tee, end reduced 22×15× 22mm

nr 0.22 3.19 8.53 1.76 13.48

tee, end and branch reduced, 22×15×15mm

nr 0.22 3.19 8.23 1.71 13.13

straight swivel connector, 22mm×1/2in

nr 0.18 2.61 6.87 1.42 10.90

bent swivel connector, 22mm ×1/2in

nr 0.18 2.61 9.08 1.75 13.44

offset tee, 22×22×15mm nr 0.22 3.19 22.35 3.83 29.37

UnitHours Hours £

Mat’ls £

O&P £

Total £

28mm diameter, to timber m 0.22 3.19 3.28 0.97 7.44 28mm diameter, plugged and screwed

m 0.24 3.48 3.48 1.04 8.00

extra over for straight coupling, 28mm nr 0.20 2.90 5.63 1.28 9.81 male coupling, 28mm× 1 nr 0.20 2.90 12.68 2.34 17.92

Stop valves

3/4in

female coupling, 28mm×1in nr 0.20 2.90 4.46 1.10 8.46 slow bend, 28mm nr 0.20 2.90 17.88 3.12 23.90 male elbow, 28mm×1in nr 0.20 2.90 5.79 1.30 9.99 male elbow, BSP parallel thread, 28mm×1in

nr 0.20 2.90 7.19 1.51 11.60

female elbow, 28mm×1in nr 0.20 2.90 8.95 1.78 13.63 tee, 28×28×28mm nr 0.24 3.48 12.95 2.46 18.89

Gunmetal stop valve with brass headwork, copper×copper

15mm nr 0.19 2.76 6.90 1.45 11.10 22mm nr 0.21 3.05 12.13 2.28 17.45 28mm nr 0.27 3.92 31.63 5.33 40.88 Gunmetal lockshield stop valve with brass headwork, copper× copper

15mm nr 0.19 2.76 15.00 2.66 20.42 22mm nr 0.21 3.05 21.17 3.63 27.85 Dezincification-resistant stop valve, copper×copper

15mm nr 0.19 2.76 16.08 2.83 21.66 22mm nr 0.21 3.05 26.40 4.42 33.86 28mm nr 0.27 3.92 43.69 7.14 54.75

UnitHoursHours £

Mat’ls £

O&P £

Total £

Dezincification-resistant lockshield stop valve, copper×copper

15mm nr 0.19 2.76 18.49 3.19 24.43 22mm nr 0.21 3.05 28.95 4.80 36.79 Gunmetal stop valve with brass

Gate valves

20×15mm nr 0.19 2.76 16.38 2.87 22.01 25×15mm nr 0.21 3.05 27.94 4.65 35.63 25×22mm nr 0.27 3.92 31.51 5.31 40.74

Brass gate valve, copper× copper 15mm nr 0.19 2.76 11.26 2.10 16.12 22mm nr 0.21 3.05 13.13 2.43 18.60 28mm nr 0.27 3.92 22.92 4.03 30.86 Brass lockshield gate valve, copper×copper

15mm nr 0.19 2.76 11.36 2.12 16.23 22mm nr 0.21 3.05 13.39 2.47 18.90 28mm nr 0.27 3.92 24.27 4.23 32.41 Gunmetal fullway gate valve, copper×copper

15mm nr 0.19 2.76 19.57 3.35 25.67 22mm nr 0.21 3.05 23.06 3.92 30.02 28mm nr 0.27 3.92 31.34 5.29 40.54 35mm nr 0.36 5.22 45.46 7.60 58.28 42mm nr 0.50 7.25 62.98 10.53 80.76 54mm nr 0.60 8.70 86.69 14.31 109.70

UnitHours Hours £

Mat’ls £

O&P £

Total £

Gunmetal lockshield gate valve, copper×copper

15mm nr 0.19 2.76 20.11 3.43 26.29 22mm nr 0.21 3.05 23.85 4.03 30.93 28mm nr 0.27 3.92 35.59 5.93 45.43 35mm nr 0.36 5.22 47.97 7.98 61.17 42mm nr 0.50 7.25 66.06 11.00 84.31 54mm nr 0.60 8.70 91.12 14.97 114.79

Drainage fittings

Single check valve with female BSP parallel threads

1/2in nr 0.19 2.76 14.07 2.52 19.35 3/4in nr 0.21 3.05 22.44 3.82 29.31 1in nr 0.27 3.92 30.63 5.18 39.73 Double check valve with female BSP parallel threads

1/2in nr 0.19 2.76 15.93 2.80 21.49 3/4in nr 0.21 3.05 32.80 5.38 41.22 1in nr 0.27 3.92 49.17 7.96 61.05

Dezincification-resistant stop valve adaptor, copper×copper

15mm nr 0.20 2.90 10.96 2.08 15.94 Draw-off coupling, copper× copper 15mm nr 0.20 2.90 10.01 1.94 14.85 Dezincification-resistant draw-off coupling, copper×copper

15mm nr 0.20 2.90 13.82 2.51 19.23 22mm nr 0.25 3.63 15.99 2.94 22.56

UnitHoursHours £

Mat’ls £

O&P £

Total £

Dezincification-resistant drawoff elbow, copper×parallel main thread

15mm×1/2in nr 0.20 2.90 10.55 2.02 15.47 22mm×3/4in nr 0.25 3.63 11.84 2.32 17.78 28mm×1in nr 0.30 4.35 19.32 3.55 27.22 Brass draw-off elbow, copper× copper

Servicing valves

Appliance valves

Cold water storage tanks

28mm nr 0.30 4.35 18.09 3.37 25.81 Dezincification-resistant drawoff elbow, copper×copper

15mm nr 0.20 2.90 15.17 2.71 20.78 22mm nr 0.25 3.63 18.70 3.35 25.67

Straight pattern, copper×copper 15×15mm nr 0.20 2.90 5.38 1.24 9.52 22×22mm nr 0.25 3.63 11.94 2.33 17.90 Straight pattern, copper×swivel end 15mm×1/2in nr 0.20 2.90 6.08 1.35 10.33

Chromium-plated stop valve 15mm×3/4in nr 0.20 2.90 4.32 1.08 8.30 Brass tee valve 15mm×3/4in nr 0.20 2.90 5.85 1.31 10.06

UnitHours Hours £

Mat’ls £

O&P £

Total £

Galvanised steel cistern with cover, reference

SC10, 18 litres nr 0.60 8.70 49.22 8.69 66.61 SC15, 36 litres nr 0.65 9.43 62.02 10.72 82.16 SC20, 54 litres nr 0.65 9.43 64.77 11.13 85.32 SC25, 68 litres nr 0.70 10.15 68.26 11.76 90.17 SC30, 86 litres nr 0.75 10.88 76.07 13.04 99.99

Hot water copper cylinders

Cutting holes for connectors 13mm nr 0.10 1.45 0.00 0.22 1.67 18mm nr 0.12 1.74 0.00 0.26 2.00 25mm nr 0.15 2.18 0.00 0.33 2.50 32mm nr 0.20 2.90 0.00 0.44 3.34 Plastic cistern with lid, reference

PC4, 18 litres nr 0.60 8.70 6.82 2.33 17.85 PC15, 68 litres nr 0.70 10.15 16.44 3.99 30.58 PC20, 91 litres nr 0.75 10.88 16.75 4.14 31.77 PC25, 114 litres nr 0.80 11.60 22.28 5.08 38.96 PC40, 182 litres nr 0.90 13.05 39.83 7.93 60.81 PC50, 227 litres nr 1.00 14.50 40.13 8.19 62.82 Cutting holes for connectors 13mm nr 0.10 1.45 0.00 0.22 1.67 18mm nr 0.12 1.74 0.00 0.26 2.00 25mm nr 0.15 2.18 0.00 0.33 2.50 32mm nr 0.20 2.90 0.00 0.44 3.34

UnitHours Hours £

Mat’ls £

O&P £

Total £

Direct cylinders, insulated, reference

ref 5, 98 litres nr 0.50 7.25 124.34 19.74 151.33 ref 7, 120 litres nr 0.55 7.98 141.93 22.49 172.39 ref 8, 148 litres nr 0.65 9.43 156.08 24.83 190.33 ref 9, 166 litres nr 0.85 12.33 170.37 27.40 210.10 Indirect cylinders, insulated, reference

ref 2, 96 litres nr 0.50 7.25 98.48 15.86 121.59 ref 3, 114 litres nr 0.55 7.98 107.11 17.26 132.35 ref 7, 117 litres nr 0.55 7.98 112.62 18.09 138.68

Insulation

Preformed pipe lagging, fire-retardant foam 13mm thick for pipe size

15mm m 0.08 1.16 1.11 0.34 2.61 22mm m 0.09 1.31 1.45 0.41 3.17 28mm m 0.10 1.45 1.72 0.48 3.65 Preformed pipe lagging, fire-retardant foam 25mm thick for pipe size

15mm m 0.10 1.45 4.27 0.86 6.58 22mm m 0.11 1.60 4.70 0.94 7.24 28mm m 0.12 1.74 5.40 1.07 8.21 50mm glass-fibre filled insulating jacket, fixing bands to tank size

445×305×300mm nr 0.35 5.08 4.26 1.40 10.74 495×368×362mm nr 0.40 5.80 5.21 1.65 12.66 630×450×420mm nr 0.45 6.53 6.03 1.88 14.44 665×490×515mm nr 0.50 7.25 7.07 2.15 16.47

Gas-fired wall-mounted boilers for domestic central heating and indirect hot water

Gas-fired floor-standing boilers for domestic central heating and indirect hot water

Unit Hours Hours £ Mat’ls £ O&P £ Total £ Balanced flue, output 30,000 BTU nr 4.80 69.60 417.57 73.08 560.25 40,000 BTU nr 4.80 69.60 481.22 82.62 633.44 50,000 BTU nr 4.80 69.60 548.23 92.67 710.50 60,000 BTU nr 4.80 69.60 635.42 105.75 810.77 Fan flue, output 30,000 BTU nr 4.20 60.90 445.56 75.97 582.43 40,000 BTU nr 4.20 60.90 501.79 84.40 647.09 50,000 BTU nr 4.20 60.90 547.51 91.26 699.67 60,000 BTU nr 4.20 60.90 592.59 98.02 751.51 70,000 BTU nr 4.20 60.90 689.09 112.50 862.49 80,000 BTU nr 4.20 60.90 1059.09 168.00 1287.99

Fanned balanced flue, output 40,000 BTU nr 4.80 69.60 552.20 93.27 715.07 50,000 BTU nr 4.80 69.60 566.30 95.39 731.29 60,000 BTU nr 4.80 69.60 586.64 98.44 754.68 70,000 BTU nr 4.80 69.60 623.27 103.93 796.80 80,000 BTU nr 4.80 69.60 856.33 138.89 1064.82 Fanned chimney flue, output 40,000 BTU nr 4.20 60.90 435.68 74.49 571.07 50,000 BTU nr 4.20 60.90 476.51 80.61 618.02 60,000 BTU nr 4.20 60.90 524.96 87.88 673.74

Gas-fired wall-mounted combination boiler for domestic central heating and hot water

Gas-fired floor-standing combination boiler for domestic central heating and hot water

Oil-fired boiler for domestic central heating and hot water

Unit Hours Hours £ Mat’ls £ O&P £ Total £ Fan flue, output 30,400-81,900 BTU nr 4.80 69.60 651.68 108.19 829.47 35,500-95,000 BTU nr 4.80 69.60 696.68 114.94 881.22 Condensing fan flue 25,200-92,800 BTU nr 4.80 69.60 815.68 132.79 1018.07 25,900-93,800 BTU nr 4.80 69.60 843.68 136.99 1050.27 Conventional flue 31,000-82,000 BTU nr 4.80 69.60 666.68 110.44 846.72

Fan flue, output 37,500-81,900 BTU nr 4.80 69.60 1074.25 171.58 1315.43

Balanced flue, output 40,000-48,000 BTU nr 4.80 69.60 754.00 10.44 80.04 50,000-65,000 BTU nr 4.80 69.60 843.75 191.15 1465.50 75,000-85,000 BTU nr 4.80 69.60 942.25 206.83 1585.68 88,000-110,000 BTU nr 4.80 69.60 1056.63 227.84 1746.80 Conventional flue, output 52,000 BTU nr 4.80 69.60 754.00 123.54 947.14 70,000 BTU nr 4.80 69.60 843.75 137.00 1050.35 90,000 BTU nr 4.80 69.60 942.25 151.78 1163.63 120,000 BTU nr 4.80 69.60 1056.63 168.93 1295.16

Oil storage tanks

UnitHoursHours £Mat’ls £O&P £ Total £ 50,000-65,000 BTU nr 4.80 69.60 1204.75 191.15 1465.50 75,000-85,000 BTU nr 4.80 69.60 1309.25 206.83 1585.68 88,000-110,000 BTU nr 4.80 69.60 1449.36 227.84 1746.80 Conventional flue, output 52,000 BTU nr 4.80 69.60 1138.51 181.22 1389.33 70,000 BTU nr 4.80 69.60 1204.75 191.15 1465.50 90,000 BTU nr 4.80 69.60 1309.25 206.83 1585.68 120,000 BTU nr 4.80 69.60 1449.36 227.84 1746.80

Standard domestic pattern plastic oil storage tank

1380×1780×890mm capacity 1200 litres

nr 1.50 21.75 170.48 28.83 221.06

745×1700×1380mm capacity 1225 litres

nr 1.50 21.75 241.93 39.55 303.23

1190mm diameter×1400 high, capacity 1300 litres

nr 1.50 21.75 170.86 28.89 221.50

1130×2055×1145mm capacity 1800 litres

nr 1.75 25.38 299.49 48.73 373.59

1265×2250×1320mm capacity 2500 litres

nr 2.00 29.00 373.05 60.31 462.36

1640mm diameter×1750 high, capacity 3600 litres

nr 2.50 36.25 411.42 67.15 514.82

2480mm diameter×2640 high, capacity 10,000 litres

nr 3.00 43.50 1189.64 184.97 1418.11

Standard domestic pattern plastic bunded oil storage tank

1380×1780×890mm capacity 1200 litres

nr 1.50 21.75 228.27 37.50 287.52

745×1700×1380mm capacity 1225 nr 1.50 21.75 299.34 48.16 369.25

UnitHoursHours £

Mat’ls £

O&P £

Total £

1190mm diameter×1400 high, capacity 1300 litres

nr 1.50 21.75 699.75 108.23 829.73

1130×2055×1145mm capacity 1800 litres

nr 1.75 25.38 730.58 113.39 869.35

1265×2250×1320mm capacity 2500 litres

nr 2.00 29.00 811.36 126.05 966.41

Single convector radiator fixed to concealed brackets plugged and screwed to brickwork

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 300mm high, length 400mm nr 0.90 13.05 14.75 4.17 31.97 800mm nr 1.05 15.23 24.49 5.96 45.67 1200mm nr 1.15 16.68 35.24 7.79 59.70 1600mm nr 1.30 18.85 45.98 9.72 74.55 2000mm nr 1.40 20.30 55.73 11.40 87.43 450mm high, length 500mm nr 1.00 14.50 14.43 4.34 33.27 1000mm nr 1.15 16.68 25.19 6.28 48.14 1400mm nr 1.25 18.13 33.62 7.76 59.51 1800mm nr 1.40 20.30 48.53 10.32 79.15 2000mm nr 1.50 21.75 64.56 12.95 99.26 600mm high, length 500mm nr 1.10 15.95 17.80 5.06 38.81 1000mm nr 1.25 18.13 30.60 7.31 56.03 1400mm nr 1.35 19.58 41.64 9.18 70.40 1800mm nr 1.50 21.75 60.58 12.35 94.68 2000mm nr 1.60 23.20 80.54 15.56 119.30 700mm high, length 500mm nr 1.20 17.40 19.80 5.58 42.78 1000mm nr 1.35 19.58 34.60 8.13 62.30 1400mm nr 1.45 21.03 63.64 12.70 97.36 1800mm nr 1.60 23.20 82.58 15.87 121.65 2000mm nr 1.70 24.65 91.54 17.43 133.62

to brickwork

Double panel radiator fixed to concealed brackets plugged and screwed to brickwork

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 300mm high, length 400mm nr 0.90 13.05 24.75 5.67 43.47 800mm nr 1.05 15.23 43.49 8.81 67.52 1200mm nr 1.15 16.68 62.24 11.84 90.75 1600mm nr 1.30 18.85 83.98 15.42 118.25 2000mm nr 1.40 20.30 103.73 18.60 142.63 450mm high, length 500mm nr 1.00 14.50 23.43 5.69 43.62 1000mm nr 1.15 16.68 43.19 8.98 68.84 1400mm nr 1.25 18.13 66.62 12.71 97.46 1800mm nr 1.40 20.30 107.53 19.17 147.00 2000mm nr 1.50 21.75 118.56 21.05 161.36 600mm high, length 500mm nr 1.10 15.95 28.10 6.61 50.66 1000mm nr 1.25 18.13 53.19 10.70 82.01 1400mm nr 1.35 19.58 82.68 15.34 117.59 1800mm nr 1.50 21.75 133.28 23.25 178.28 2000mm nr 1.60 23.20 147.96 25.67 196.83 700mm high, length 500mm nr 1.20 17.40 31.80 7.38 56.58 1000mm nr 1.35 19.58 60.60 12.03 92.20 1400mm nr 1.45 21.03 112.64 20.05 153.71 1800mm nr 1.60 23.20 150.58 26.07 199.85 2000mm nr 1.70 24.65 165.54 28.53 218.72

Unit Hours Hours £ Mat’ls £ O&P £ Total £ 300mm high, length 400mm nr 0.90 13.05 19.75 4.92 37.72

1600mm nr 1.30 18.85 65.98 12.72 97.55 2000mm nr 1.40 20.30 80.73 15.15 116.18 450mm high, length 500mm nr 1.00 14.50 19.43 5.09 39.02 1000mm nr 1.15 16.68 34.19 7.63 58.49 1400mm nr 1.25 18.13 52.62 10.61 81.36 1800mm nr 1.40 20.30 84.53 15.72 120.55 2000mm nr 1.50 21.75 93.56 17.30 132.61 600mm high, length 500mm nr 1.10 15.95 23.10 5.86 44.91 1000mm nr 1.25 18.13 42.19 9.05 69.36 1400mm nr 1.35 19.58 65.68 12.79 98.04 1800mm nr 1.50 21.75 105.28 19.05 146.08 2000mm nr 1.60 23.20 116.96 21.02 161.18 700mm high, length 500mm nr 1.20 17.40 29.80 7.08 54.28 1000mm nr 1.35 19.58 57.60 11.58 88.75 1400mm nr 1.45 21.03 89.64 16.60 127.26 1800mm nr 1.60 23.20 119.58 21.42 164.20 2000mm nr 1.70 24.65 132.54 23.58 180.77

Rainwater installation

UnitHoursHours £

Mat’ls £

O&P £

Total £

Remove existing gutters and fittings, prepare to receive new gutterwork

cast iron up to 100mm nr 0.50 7.25 0.00 1.09 8.34 over 100mm nr 0.60 8.70 0.00 1.31 10.01 PVC-U up to 100mm nr 0.30 4.35 0.00 0.65 5.00 over 100mm nr 0.35 5.08 0.00 0.76 5.84 aluminium up to 100mm nr 0.30 4.35 0.00 0.65 5.00 over 100mm nr 0.35 5.08 0.00 0.76 5.84 asbestos cement up to 100mm nr 0.30 4.35 0.00 0.65 5.00 over 100mm nr 0.35 5.08 0.00 0.76 5.84 Remove single length of gutter, prepare ends and fix new length to existing brackets

cast iron 100mm nr 2.00 29.00 21.70 7.61 58.31 115mm nr 2.10 30.45 22.40 7.93 60.78 125mm nr 2.15 31.18 25.80 8.55 65.52 150mm nr 2.30 33.35 43.28 11.49 88.12 PVC-U 76mm nr 1.00 14.50 12.14 4.00 30.64 112mm nr 1.05 15.23 9.96 3.78 28.96 150mm nr 1.10 15.95 13.21 4.37 33.53

aluminium 100mm nr 1.90 27.55 24.28 7.77 59.60 125mm nr 2.05 29.73 30.98 9.11 69.81 Remove gutter fittings, prepare ends and fix new fitting

cast iron, 100mm angle nr 0.75 10.88 7.16 2.71 20.74 stop end outlet nr 0.50 7.25 8.18 2.31 17.74 cast iron, 115mm angle nr 0.75 10.88 7.37 2.74 20.98 stop end outlet nr 0.50 7.25 9.17 2.46 18.88 cast iron, 125mm angle nr 0.75 10.88 8.69 2.93 22.50 stop end outlet nr 0.50 7.25 10.46 2.66 20.37 cast iron, 150mm angle nr 0.75 10.88 15.87 4.01 30.76 stop end outlet nr 0.50 7.25 17.20 3.67 28.12 PVC-U, 76mm angle nr 0.50 7.25 6.03 1.99 15.27 outlet nr 0.50 7.25 5.53 1.92 14.70 stop end nr 0.50 7.25 2.97 1.53 11.75 PVC-U, 112mm angle nr 0.50 7.25 4.45 1.76 13.46 outlet nr 0.50 7.25 3.90 1.67 12.82 stop end nr 0.50 7.25 1.95 1.38 10.58

UnitHoursHours £

Mat’ls £

O&P £

Total £

PVC-U, 150mm angle nr 0.55 7.98 9.27 2.59 19.83 outlet nr 0.55 7.98 5.56 2.03 15.57 stop end nr 0.55 7.98 1.82 1.47 11.26 aluminium, 100mm angle nr 0.60 8.70 6.45 2.27 17.42

aluminium, 160mm angle nr 0.60 8.70 8.79 2.62 20.11 outlet nr 0.60 8.70 7.25 2.39 18.34 stop end nr 0.60 8.70 3.16 1.78 13.64 Remove existing gutter brackets and replace with galvanised steel repair brackets at 1m maximum centres

cast iron 100mm nr 0.25 3.63 1.91 0.83 6.37 112mm nr 0.27 3.92 1.91 0.87 6.70 125mm nr 0.30 4.35 1.91 0.94 7.20 PVC-U 76mm nr 0.25 3.63 0.71 0.65 4.99 112mm nr 0.27 3.92 1.22 0.77 5.91 150mm nr 0.30 4.35 1.38 0.86 6.59 aluminium 100mm nr 0.20 2.90 1.75 0.70 5.35 112mm nr 0.20 2.90 1.80 0.71 5.41 125mm nr 0.20 2.90 3.24 0.92 7.06

UnitHours Hours £

Mat’ls £

O&P £

Total £

Remove pipes and fittings, prepare to receive new pipework

cast iron up to 100mm m 0.50 7.25 0.00 1.09 8.34 over 100mm m 0.60 8.70 0.00 1.31 10.01 PVC-U up to 100mm m 0.30 4.35 0.00 0.65 5.00 over 100mm m 0.35 5.08 0.00 0.76 5.84 aluminium up to 100mm m 0.30 4.35 0.00 0.65 5.00 over 100mm m 0.35 5.08 0.00 0.76 5.84

cast iron 65mm diameter nr 0.70 10.15 14.94 3.76 28.85 75mm diameter nr 0.70 10.15 41.02 7.68 58.85 100mm diameter nr 0.80 11.60 53.60 9.78 74.98 PVC-U 68mm diameter nr 0.50 7.25 11.22 2.77 21.24 68mm square nr 0.60 8.70 13.44 3.32 25.46 aluminium 63mm diameter nr 0.50 7.25 30.66 5.69 43.60 76mm diameter nr 0.50 7.25 37.78 6.75 51.78 102mm diameter nr 0.60 8.70 52.76 9.22 70.68 Remove existing pipe fittings, replace with new

cast iron offset 65mm diameter nr 0.28 4.06 15.28 2.90 22.24 75mm diameter nr 0.30 4.35 15.28 2.94 22.57 100mm diameter nr 0.32 4.64 29.39 5.10 39.13

Unit Hours Hours £ Mat’ls £ O&P £ Total £ cast iron shoe 65mm diameter nr 0.36 5.22 14.14 2.90 22.26 75mm diameter nr 0.38 5.51 21.26 4.02 30.79 100mm diameter nr 0.40 5.80 19.06 3.73 28.59 cast iron shoe, eared 65mm diameter nr 0.36 5.22 16.30 3.23 24.75 75mm diameter nr 0.38 5.51 16.30 3.27 25.08 100mm diameter nr 0.40 5.80 21.66 4.12 31.58 cast iron bend 65mm diameter nr 0.20 2.90 9.98 1.93 14.81 75mm diameter nr 0.22 3.19 12.12 2.30 17.61 100mm diameter nr 0.24 3.48 17.12 3.09 23.69 PVC-U bend 68mm diameter nr 0.40 5.80 5.39 1.68 12.87 68mm square nr 0.40 5.80 3.44 1.39 10.63 PVC-U offset

PVC-U shoe 68mm diameter nr 0.20 2.90 4.65 1.13 8.68 68mm square nr 0.20 2.90 3.95 1.03 7.88 aluminium offset 63mm diameter nr 0.30 4.35 29.01 5.00 38.36 76mm diameter nr 0.32 4.64 35.69 6.05 46.38 102mm diameter nr 0.24 3.48 43.39 7.03 53.90 aluminium bend 63mm diameter nr 0.38 5.51 23.61 4.37 33.49 76mm diameter nr 0.40 5.80 26.54 4.85 37.19 102mm diameter nr 0.42 6.09 38.05 6.62 50.76

UnitHours Hours £

Mat’ls £

O&P £

Total £

Remove existing gutter fittings, replace with new

cast iron angle 100mm diameter nr 0.44 6.38 7.16 2.03 15.57 125mm diameter nr 0.46 6.67 8.69 2.30 17.66 150mm diameter nr 0.48 6.96 15.87 3.42 26.25 cast iron stop end outlet 100mm diameter nr 0.30 4.35 8.18 1.88 14.41 125mm diameter nr 0.32 4.64 10.46 2.27 17.37 150mm diameter nr 0.34 4.93 17.20 3.32 25.45 PVC-U running outlet 76mm nr 0.20 2.90 5.53 1.26 9.69 112mm nr 0.22 3.19 3.90 1.06 8.15 150mm nr 0.24 3.48 9.00 1.87 14.35 PVC-U angle 76mm nr 0.20 2.90 6.03 1.34 10.27 112mm nr 0.22 3.19 4.45 1.15 8.79 150mm nr 0.24 3.48 9.27 1.91 14.66 PVC-U stop end outlet 76mm nr 0.20 2.90 4.85 1.16 8.91 112mm nr 0.22 3.19 3.90 1.06 8.15

Hot and cold water supply and heating installation

100mm nr 0.38 5.51 10.96 2.47 18.94 125mm nr 0.42 6.09 10.48 2.49 19.06

UnitHoursHours £

Mat’ls £

O&P £

Total £

aluminium angle 100mm nr 0.38 5.51 6.45 1.79 13.75 125mm nr 0.42 6.09 8.79 2.23 17.11 aluminium stop end outlet 100mm nr 0.38 5.51 6.30 1.77 13.58 125mm nr 0.42 6.09 7.25 2.00 15.34 Rake out existing cement mortar joint of soil pipe connection and re-point

65mm diameter pipe nr 0.40 5.80 0.50 0.95 7.25 75mm diameter pipe nr 0.45 6.53 0.60 1.07 8.19 100mm diameter pipe nr 0.50 7.25 0.70 1.19 9.14

Cut out 500mm length of copper pipe, fix new length with brass compression connections to existing ends

15mm nr 0.40 5.80 3.46 1.39 10.65 18mm nr 0.40 5.80 4.90 1.61 12.31 22mm nr 0.40 5.80 5.61 1.71 13.12 28mm nr 0.45 6.53 7.92 2.17 16.61 35mm nr 0.45 6.53 14.54 3.16 24.22 42mm nr 0.50 7.25 18.28 3.83 29.36 54mm nr 0.50 7.25 22.72 4.50 34.47 Remove existing pipework and prepare to receive new

copper up to 25mm nr 0.20 2.90 0.00 0.44 3.34

Sanitary fittings

UnitHoursHours £

Mat’ls £

O&P £

Total £

lead up to 1in nr 0.50 7.25 0.00 1.09 8.34 Take off existing radiator valve, replace with new, drain down system prior to removal and bleed after installation

single valves, standard type nr 0.40 5.80 16.94 3.41 26.15 complete systems, 9nr valves, standard type

nr 4.00 58.00 152.46 31.57 242.03

Take out existing galvanised steel water storage tank, fix new plastic tank complete with ball valve, lid and insulation, allow for cutting holes

18 litres tank nr 3.00 43.50 18.32 9.27 71.09 68 litres tank nr 3.50 50.75 27.51 11.74 90.00 154 litres tank nr 4.30 62.35 49.59 16.79 128.73

Take out existing cast iron bath including trap and taps, cut back pipework as necessary and fix new acrylic reinforced bath complete with trap, bath panels, taps and shower handset and connect to existing pipework

nr 4.00 58.00 342.51 60.08 460.59

UnitHoursHours £

Mat’ls £

O&P £

Total £

Take out existing wash basin including trap and taps, cut

nr 3.00 43.50 112.48 23.40 179.38

wash basin complete with trap and taps and connect to existing pipework Take out existing high-level WC, cut back pipework as necessary and fix new lowlevel WC suite complete and connect to existing pipework

nr 3.50 50.75 272.85 48.54 372.14