ABSTRACT
RESOURCES - LABOUR Painting gang 1 ganger (skill rate 3) 15.84 3 painters (skill rate 3) 44.64 1 unskilled operative (general) 12.44 Total Gang Rate / Hour £ 72.92 RESOURCES - PLANT Painting 1.5KVA diesel generator 2.79 transformers/cables; junction box 0.26 4.5" electric grinder 0.39 transit van (50% of time) 5.41 ladders 1.22 Total Rate / Hour £ 10.07 LEAD BASED PRIMER PAINT One coat calcium plumbate primer Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.03 1.83 0.25 0.66 m2 2.74 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.03 1.83 0.25 0.66 m2 2.74 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.03 1.83 0.25 0.66 m2 2.74 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.03 2.19 0.31 0.66 m2 3.16 surfaces of width ne 300 mm 0.01 0.73 0.11 0.20 m 1.03 surfaces of width 300 mm - 1 m 0.03 1.83 0.25 0.43 m 2.50 Metal sections 0.03 2.19 0.29 0.66 m2 3.15 Pipework 0.03 2.19 0.29 0.66 m2 3.15 IRON BASED PRIMER PAINT One coat iron oxide primer Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.03 1.83 0.25 0.77 m2 2.84 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.03 1.83 0.25 0.77 m2 2.84 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.03 1.83 0.25 0.77 m2 2.84 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.03 2.19 0.31 0.77 m2 3.26 surfaces of width ne 300 mm 0.01 0.73 0.11 0.23 m 1.07 surfaces of width 300 mm - 1 m 0.03 1.83 0.25 0.51 m 2.59 Metal sections 0.03 2.19 0.29 0.77 m2 3.25 Pipework 0.03 2.19 0.29 0.77 m2 3.25
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
ACRYLIC PRIMER PAINT One coat acrylic wood primer Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.02 1.46 0.20 0.44 m2 2.10 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.02 1.46 0.20 0.44 m2 2.10 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.02 1.46 0.20 0.44 m2 2.10 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.03 1.83 0.25 0.44 m2 2.52 surfaces of width ne 300 mm 0.01 0.73 0.09 0.13 m 0.96 surfaces of width 300 mm - 1 m 0.03 1.83 0.25 0.29 m 2.36 GLOSS PAINT One coat calcium plumbate primer; one undercoat and one finishing coat of gloss paint Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 5.12 0.71 1.29 m2 7.11 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.08 5.48 0.76 1.29 m2 7.52 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.85 0.81 1.29 m2 7.94 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.09 6.21 0.85 1.29 m2 8.35 surfaces of width ne 300 mm 0.03 1.83 0.25 0.39 m 2.46 surfaces of width 300 mm - 1 m 0.05 3.65 0.51 0.84 m 5.00 Metal sections 0.09 6.58 0.87 1.29 m2 8.74 Pipework 0.09 6.58 0.87 1.29 m2 8.74 One coat acrylic wood primer; one undercoat and one finishing coat of gloss paint Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 4.75 0.57 1.07 m2 6.39 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 5.12 0.71 1.07 m2 6.89 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 1.07 m2 7.31 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 1.07 m2 7.72 surfaces of width ne 300 mm 0.03 1.83 0.17 0.32 m 2.31 surfaces of width 300 mm - 1 m 0.05 3.65 0.51 0.69 m 4.85 One coat calcium plumbate primer; two undercoats and one finishing coat of gloss paint Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.06 4.38 0.60 1.59 m2 6.58 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 4.75 0.65 1.59 m2 6.99
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
GLOSS PAINT – cont’d One coat calcium plumbate primer; two undercoats and one finishing coat of gloss paint – cont’d Metal – cont’d surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.07 5.12 0.71 1.59 m2 7.42 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.48 0.76 1.55 m2 7.79 surfaces of width ne 300 mm 0.03 2.19 0.31 0.48 m 2.98 surfaces of width 300 mm - 1 m 0.06 4.38 0.60 1.03 m 6.02 One coat acrylic wood primer; two undercoats and one finishing coat of gloss paint Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 4.75 0.65 1.37 m2 6.78 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 5.12 0.71 1.37 m2 7.20 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 1.38 m2 7.62 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.75 1.37 m2 7.97 surfaces of width ne 300 mm 0.03 2.19 0.71 0.41 m 3.31 surfaces of width 300 mm - 1 m 0.06 4.38 0.60 0.89 m 5.88 One coat alkali resisting primer; two undercoats and one finishing coat of gloss paint Smooth concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.04 2.56 0.35 1.37 m2 4.28 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.04 2.92 0.40 1.37 m2 4.69 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.05 3.29 0.45 1.37 m2 5.11 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.05 3.65 0.51 1.37 m2 5.53 surfaces of width ne 300 mm 0.02 1.10 0.15 0.41 m 1.66 surfaces of width 300 mm - 1 m 0.03 2.19 0.31 0.89 m 3.39 Brickwork and rough concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.04 2.92 0.40 1.39 m2 4.71 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.05 3.29 0.45 1.40 m2 5.14 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.05 3.65 0.51 1.43 m2 5.60 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.06 4.02 0.56 1.43 m2 6.01 surfaces of width ne 300 mm 0.02 1.46 0.20 0.43 m 2.09 surfaces of width 300 mm - 1 m 0.04 2.56 0.35 0.92 m 3.84 Blockwork upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.06 4.02 0.56 1.43 m2 6.01 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.06 4.38 0.60 1.43 m2 6.42 surfaces of width ne 300 mm 0.03 1.83 0.25 0.43 m 2.51 surfaces of width 300 mm - 1 m 0.04 2.92 0.40 0.93 m 4.26
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
Two coats anti-condensation paint Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.08 5.48 0.76 4.87 m2 11.11 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.08 5.48 0.76 4.87 m2 11.11 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 4.87 m2 11.11 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 4.87 m2 11.53 surfaces of width ne 300 mm 0.03 2.19 0.31 1.46 m 3.96 surfaces of width 300 mm - 1 m 0.05 3.65 0.51 3.17 m 7.33 Metal sections 0.09 6.58 0.91 4.87 m2 12.36 EMULSION PAINT One thinned coat, two coats vinyl emulsion paint Smooth concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 4.75 0.65 0.88 m2 6.28 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 5.12 0.71 0.88 m2 6.70 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 0.88 m2 7.11 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 0.88 m2 7.53 surfaces of width ne 300 mm 0.03 2.19 0.31 0.26 m 2.76 surfaces of width 300 mm - 1 m 0.07 5.12 0.71 0.57 m 6.39 Brickwork and rough concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.08 5.48 0.76 0.90 m2 7.14 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.08 5.85 0.81 0.90 m2 7.55 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.09 6.21 0.85 0.90 m2 7.97 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.09 6.58 0.91 0.90 m2 8.39 surfaces of width ne 300 mm 0.03 2.19 0.31 0.27 m 2.77 surfaces of width 300 mm - 1 m 0.08 5.85 0.81 0.62 m 7.27 Blockwork surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.09 6.58 0.91 0.92 m2 8.41 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.10 7.31 1.01 0.92 m2 9.24 surfaces of width ne 300 mm 0.04 2.92 0.40 0.28 m 3.60 surfaces of width 300 mm - 1 m 0.08 5.85 0.81 0.60 m 7.25
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
CEMENT PAINT Two coats masonry paint Smooth concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 4.75 0.65 0.74 m2 6.14 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 5.12 0.71 0.74 m2 6.57 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 0.74 m2 6.98 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 0.74 m2 7.39 surfaces of width ne 300 mm 0.03 2.19 0.31 0.22 m 2.72 surfaces of width 300 mm - 1 m 0.07 5.12 0.71 0.48 m 6.31 Brickwork and rough concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.08 5.48 0.76 0.86 m2 7.09 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.08 5.85 0.81 0.86 m2 7.51 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.09 6.21 0.85 0.86 m2 7.92 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.09 6.58 0.91 0.86 m2 8.34 surfaces of width ne 300 mm 0.03 2.19 0.31 0.26 m 2.76 surfaces of width 300 mm - 1 m 0.08 5.85 0.81 0.56 m 7.21 Blockwork surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.09 6.58 0.91 1.11 m2 8.60 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.10 7.31 1.01 1.11 m2 9.43 surfaces of width ne 300 mm 0.04 2.92 0.40 0.33 m 3.66 surfaces of width 300 mm - 1 m 0.08 5.85 0.81 0.72 m 7.37 One thinned coat, two coats concrete floor paint Smooth concrete upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.07 4.75 0.65 4.18 m2 9.58 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 5.12 0.71 4.18 m2 10.00 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.08 5.48 0.76 4.18 m2 10.41 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 2.28 m2 8.93 surfaces of width ne 300 mm 0.03 2.19 0.31 1.29 m 3.79 surfaces of width 300 mm - 1 m 0.07 5.12 0.71 2.71 m 8.54 Additional coats width exceeding 1 m 0.03 2.19 0.31 1.67 m2 4.17 surfaces of width ne 300 mm 0.01 0.73 0.11 0.50 m 1.34 surfaces of width 300 mm - 1 m 0.02 1.10 0.25 1.09 m 2.43
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
EPOXY OR POLYURETHANE PAINT Blast clean to BS 7079; one coat zinc chromate etch primer, two coats zinc phosphate CR/alkyd undercoat off site; one coat MIO CR undercoat and one coat CR finish on site Metal sections - - - - m2 27.16 Blast clean to BS 7079; one coat zinc rich 2 pack primer, one coat MIO high build epoxy 2 pack paint off site; one coat polyurethane 2 pack undercoat and one coat polyurethane 2 pack finish on site Metal sections - - - - m2 29.37 Two coats clear polyurethane varnish Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.04 2.92 0.40 1.47 m2 4.79 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.05 3.29 0.45 1.47 m2 5.21 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.05 3.65 0.51 1.47 m2 5.63 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.06 4.38 0.60 1.47 m2 6.46 surfaces of width ne 300 mm 0.03 1.83 0.25 0.44 m 2.52 surfaces of width 300 mm - 1 m 0.05 3.65 0.51 0.96 m 5.12 Two coats colour stained polyurethane varnish Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.04 2.92 0.40 1.12 m2 4.45 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.05 3.29 0.45 1.12 m2 4.86 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.05 3.65 0.51 1.12 m2 5.28 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.06 4.38 0.60 1.12 m2 6.11 surfaces of width ne 300 mm 0.03 1.83 0.25 0.34 m 2.41 surfaces of width 300 mm - 1 m 0.05 3.65 0.51 0.73 m 4.89 Three coats colour stained polyurethane varnish Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.06 4.02 0.56 1.68 m2 6.26 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 4.75 0.65 1.68 m2 7.08 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.07 5.12 0.71 1.68 m2 7.51 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.09 6.21 0.85 1.68 m2 8.75 surfaces of width ne 300 mm 0.04 2.56 0.35 0.50 m 3.42 surfaces of width 300 mm - 1 m 0.07 5.12 0.71 1.09 m 6.92
Item
Gang hours
Labour £
Plant £
Material £ Unit
Total rate £
EPOXY OR POLYURETHANE PAINT – cont’d One coat hardwood stain basecoat and two coats hardwood woodstain Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.06 4.38 0.60 1.50 m2 6.49 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.07 4.75 0.65 1.50 m2 6.90 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.07 5.12 0.71 1.50 m2 7.33 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.08 5.85 0.81 1.61 m2 8.26 surfaces of width ne 300 mm 0.04 2.56 0.35 0.45 m 3.36 surfaces of width 300 mm - 1 m 0.07 5.12 0.71 0.98 m 6.80 BITUMINOUS OR PRESERVATIVE PAINT Two coats golden brown wood preservative Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal 0.05 3.29 0.45 0.57 m2 4.31 upper surfaces inclined at an angle 30 - 60 degrees to the horizontal 0.05 3.65 0.51 0.57 m2 4.73 surfaces inclined at an angle exceeding 60 degrees to the horizontal 0.06 4.02 0.56 0.57 m2 5.14 soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal 0.07 4.75 0.65 0.57 m2 5.97 surfaces of width ne 300 mm 0.03 2.19 0.31 0.17 m 2.67 surfaces of width 300 mm - 1 m 0.06 4.02 0.56 0.37 m 4.94 Two coats bituminous paint Metal sections 0.08 5.85 0.81 1.43 m2 8.08 Pipework 0.09 6.58 0.96 1.43 m2 8.97
