ABSTRACT

A 1 7 0 8 Computer models in offshore engineering, specialty conference; Halifax, Nova Scotia, 1984 Montreal: Canadian Society for Civil Engineering 1984, 488 pages

A 1 7 1 0 Current practices and new technologies in ocean engineering McGuinness Tand Smith H H Fairfield, NJ: American Society of Mechanical Engineers

1986, [OED Volume 11]

Current practices and new technologies in ocean engineering, 1987: presented at the 10th Energy Sources Technology Conference; Dallas, 15-18 February 1987 Wolfe G K (editor) Fairfield NJ: American Society of Mechanical Engineers

1987 v + 162 pages [OED Volume 12]

Current practices and new technologies in ocean engineering, 1988: presented at the 11th Energy Sources Technology Conference; New Orleans, 10-13 January 1987 Wolfe G K and Chang P Y (editors) Fairfield NJ: American Society of Mechanical Engineers

1988, v +177 pages [OED Volume 13]

Decade of the oceans: 16th annual conference of the Marine Technology Society; Washington DC, 6-8 October 1980 Washington DC: Marine Technology Society 1980, 607 pages A 1 7 1 4 Deepwater mooring and drilling: winter annual meeting of ASME, New York, 1979 Lou YK (editor) New York: ASME 1979, 212 pages [OED Volume 7]

1991, 91 papers

Development of arctic offshore technology Enkvist E and Eranti E Finland: Technology Development Centre (TEKES) 1990, 95 pages A 1 7 1 7 European offshore mechanics, 1st symposium; Trondheim, 20-22 August 1990 Chung JSetal (editors) Golden CO: International Society of Offshore & Polar Engineers 1990, xi +564 pages

A 1 7 1 8 International offshore and polar engineering, 1st conference; Edinburgh, 11-16 August 1991 Chung JSetal (editors) Golden CO: International Society of Offshore & Polar Engineers 1991, 4 volumes

A 1 7 1 9 Handbook of coastal and ocean engineering, volume 2: offshore structures, marine foundations, sediment processes and modelling Herbich J B (editor) Houston, London: Gulf Publishing Company 1991

MARINE TECHNOLOGY

A 1 7 2 3 Marine safety conference; Glasgow, 7^9 September 1983 Glasgow: University of Glasgow Department of Naval Architecture and Ocean Engineering 1983, 31 papers

A 1 7 2 6 Marinetech China '85 conference; English language edition: Volume 3, offshore technology; Shanghai,4-10 December 1985 Hong Kong: Lloyd's of London Press (Far East) 1985

A 1 7 2 8 MTS '91: an ocean cooperative: industry, government and academia; New Orleans, 10-14 November 1991 Washington DC: Marine Technology Society 1991

A 1 7 2 9 North Sea horizons: technology in the quest for oil and gas Offshore Supplies Office London, Glasgow: Department of Energy 1981, 57 pages

A 1 7 3 1 Ocean energy: 15th annual conference of the Marine Technology Society; New Orleans, 10-12 October 1979 Washington DC: Marine Technology Society 1979, xiii + 419 pages

A 1 7 3 3 Oceanology [Oceanology International '86; Brighton, 4-7 March 1986] London: Graham & Trotman 1986, 486 pages [Advances in Underwater Technology, Ocean Science and Offshore Engineering, Volume 6]

A 1 7 3 4 Oceanology '88 [Oceanology International '88; Brighton, 8-11 March 1988] London: Graham & Trotman 1988, 304 pages [Advances in Underwater Technology, Ocean Science and Offshore Engineering, Volume 16]

A 1 7 3 6 Oceans '87: the oceans, an international workplace; Halifax, Nova Scotia, 28 September-1 October 1987 Piscataway NJ: IEEE 1987, 5 volumes

A 1 7 3 8 Oceans '89: addressing methods for understanding the global ocean; Seattle, 18-21 September 1989 New York: IEEE 1989, 6 volumes

GENERAL

A 1 7 4 1 Offshore and onshore engineering practices compared: Subject Group for Oil and Natural Gas Production (SONG) seminar; Glasgow, 21-22 November 1984 Rugby: Institution of Chemical Engineers 1984,12 papers + loose paper

A 1 7 4 2 OMAE 1987; offshore mechanics and arctic engineering, 6th symposium; Houston, 1-6 March 1987 Chung J S (editor) New York: ASME 1987, 4 volumes

A 1 7 4 3 OMAE 1988; offshore mechanics and arctic engineering, 7th international conference; Houston, 7-12 February 1988 New York: ASME 1988, 6 volumes

A 1 7 4 4 OMAE 1989, offshore mechanics and arctic engineering, 8th international conference; The Hague, 19-23 March 1989 New York: ASME 1989, 6 volumes

A 1 7 4 5 OMAE 1990; offshore mechanics and arctic engineering, 9th international conference; Volume IV, arctic/polar technology; Houston, 18-23 February 1990 New York: ASME 1990, ix +339 pages

A 1 7 4 6 OMAE 1991; offshore mechanics and arctic engineering; 10th international conference; Volume IV, arctic/polar technology; Stavanger, 23-28 June 1991 New York: ASME 1991, 287 pages

A 1 7 4 7 OMAE 1st speciality symposium on offshore and arctic frontiers: 9th annual energy sources technology conference; New Orleans, 23-27 February 1986 Salama M M (editor) New York: ASME 1986, ix + 492 pages

A 1 7 4 8 Offshore mechanics and cold ocean engineering symposium; St John's, 13-15 June 1983 St John's: Memorial University of Newfoundland, Continuing Education Centre 1983,12 papers

MARINE TECHNOLOGY

A 1 7 5 5 Pacem in Maribus XVI: ocean technology, development, training and transfer conference; Halifax, Canada, August 1988 Vandermuelen J and Walker S Oxford: Pergamon 1990: 522 pages

A 1 7 5 6 Pacific/Asia offshore mechanics, 1st symposium; Seoul, 24-28 June 1990 Chung JSetal (editors) Golden CO: International Society of Offshore & Polar Engineers 1990, 3 volumes

A 1 7 5 8 POAC '87: 9th international conference on port and ocean engineering under arctic conditions; Fairbanks, Alaska, 17-21 August 1987 Fairbanks AK: Geophysical Institute, University of Alaska 1988, 2 volumes

A 1 7 5 9 POAC '89:10th international conference on port and ocean engineering under arctic conditions; Lulea, 12-16 June 1989 Axelesson KB EandFransson L A (editors) Lulea: Lulea University of Technology 1989, 2 volumes

A 1 7 6 0 POAC '91:11th international conference on port and ocean engineering under arctic conditions; St John's, Canada, 24-28 September 1991 Muggeridge DBetal (editors) St John's, Newfoundland: Memorial University 1991, 2 volumes

A 1 7 6 1 Poiartech '86: international offshore and navigation conference; Helsinki, 27-30 October 1986 Espoo: Technical Research Centre of Finland (VTT) 1986, 3 volumes + 2 loose papers

A 1 7 6 2 Poiartech '88: international conference on technology for polar areas; Trondheim, 15-17 June 1988 Hansen A and Storm J F (editors) Trondheim: TAPIR 1988, 2 volumes

A 1 7 6 3 Poiartech '90: international conference on development and commercial utilization of technologies in polar regions; Copenhagen, 14-16 August 1990 Horsholm: Danish Hydraulic Institute 1990, xiii + 759 pages

A 1 7 6 4 Responding to changes in sea level: engineering implications US National Research Council Chichester: Wiley 1987, 160 pages

A 1 7 6 5 Risers, arctic design criteria, equipment reliability in hydrocarbon processing: workbook for engineers presented at 37th Petroleum Mechanical Engineering Workshop and conference; Dallas, 13-15 September 1981 New York: ASME 1981, 242 pages

A 1 7 6 6 Science and technology for a new oceans decade, proceedings; Washington DC, 26-28 September 1990 Washington DC: Marine Technology Society 1990, 3 volumes

HYDRODYNAMICS

A 1 7 7 0 Techno-Ocean '88, symposium: Kobe, 16-18 November 1988 Tokyo: Techno-Ocean '88 Secretariat 1988, 2 volumes

A 1 7 7 1 Technology common to aero and marine engineering, proceedings; London, 26-28 January 1988 London: Graham & Trotman for Society for Underwater Technology 1988, xvi + 304 pages [Advances in Underwater Technology, 15]

A 1 7 7 2 Technology for the arctic: special conference topic A, Offshore G0teborg *83; Sweden, ^-4 March 1983 Goteborg: Swedish Trade Fair Foundation 1983, 5 volumes + 2 loose papers

A 1 7 7 4 UnderSeas defense '88: advanced technology for undersea defense; San Diego, 3-6 October 1988 Spring Valley CA: West Star Productions 1988, 200 pages + 2 loose papers

HYDRODYNAMICS A 1 7 7 6 Action de I'environnement sur les ouvrages en mer ARAE Paris: Editions Technip 1989

[Guides Practiques sue les Ouvrages en Mer]

Advanced dynamics of marine structures HooftJP New York, Chichester: John Wiley & Sons 1982, x +345 pages

A 1 7 7 8 Analysis of uncertainties in environmental loading on offshore structures: a summary report CarrP London: HMSO 1989, iv + 30 pages

1991, ii + 28 pages [OTH 89 311]

The compilation of non-linear waves on a current of arbitrary non-uniform profile London: HMSO 1990 [OTH 90 327] A 1 7 8 2 Development of a method to make use of sensitivity studies and its application to analysis of uncertainties in environmental loading on offshore structures Department of Energy London: HMSO 1989 [OTI 88 537]

A 1 7 8 3 Dynamic loads on offshore structures, bibliography Stuttgart: Information Centre for Regional Planning and Building Construction (IRB) 1989, 94 pages [ICONDA Bibliography No 46]

A 1 7 8 4 Dynamics of marine vehicles and structures in waves; IUTAM symposium; Uxbridge, 24-27 June 1990 Price WGetal (editors) Amsterdam, Oxford: Elsevier Science 1991, xiv +338 pages

A 1 7 8 5 Environmental forces on offshore structures: a state-of-the-art review Soding H et al Marine Structures 1990, Vol 3(1), pages 59-81

MARINE TECHNOLOGY

A 1 7 8 6 Environmental forces on offshore structures and their prediction: conference; London, 28-29 November 1990 Society for Underwater Technology Dordrecht, London: Kiuwer 1990, viii + 429 pages [Advances in Underwater Technology, Ocean Science.. Volume 26]

A 1 7 8 7 Estimation of fluid loading on offshore structures Hogben N, et al Feltham: National Maritime Institute [British Maritime Technology Ltd] 1977, [NMI R11 OT-R-7614]

A 1 7 8 8 Field measurements of directional wave loads on coastal structures Heleran J van et al Applied Ocean Research 1989, Volume 11(2) pages 58-74

A 1 7 8 9 Flow-induced vibration: proceedings of 1st international conference; Bowness-onWindermere, 12-14 May 1987 King R (editor) Berlin, London: Springer, for BHRA 1987, 600 pages

1990, two volumes [OTH 90 322]

Handbook of coastal and ocean engineering; Volume 1: wave phenomena and coastal structures Herbich J B (editor) Houston: Gulf Publishing 1990, 912 pages A 1 7 9 2 Hydrodynamic forces NaudascherE Rotterdam: A A Balkema 1990, 300 pages [Hydraulic Structures Design Manual 3]

A 1 7 9 3 Hydrodynamics in ocean engineering: international symposium; Trondheim, 24-28 August 1981 Trondheim: Norwegian Hydrodynamic Laboratories 1981, 2 volumes

A 1 7 9 4 Hydrodynamics of offshore structures: mathematical theory and its applications in structures Chakrabarti S K Southampton: CML Publications 1987, 480 pages

A 1 7 9 5 The hydrodynamics of waves and tides with some applications Rahman M Southamtpon: Computationai Mechanics 1989, 322 pages

A 1 7 9 6 An inventory of cylinder hydrodynamic elements under wave conditions: a state of the art review Hauguel A et al International Association for Hydraulic Research 1980, 33 pages [in English and French]

A 1 7 9 8 Mechanics of wave forces on offshore structures Sarpkaya T and Isaacson M New York, Wokingham: Van Nostrand Reinhold 1981, xv + 651 pages

A 1 8 0 0 The nature of air flows over offshore platforms Davies M Eetal Feltham: National Maritime Institute [British Maritime Technology Ltd] 1977, 46 pages [NMI R14, OT-R-7726]

HYDRODYNAMICS

A 1 8 0 2 Ocean waves mechanics, computational fluid dynamics and mathematical modelling; 11th conference Rahman M (editor, for Canadian Applied Mathematical Society) Southampton: Computational Mechanics 1990, 968 pages

A 1 8 0 3 Principles of fluid flow and surface waves in rivers, estuaries, seas and oceans Rijn, L C van Amsterdam: Aqua Publications 1991, 400 pages

A 1 8 0 4 Probabilistic offshore mechanics Spanos P D (editor) Southampton: Computational Mechanics 1985, 109 pages [reprinted from Journal of Applied Ocean Research]

A 1 8 0 5 Probability distributions for environmental load on offshore structures Lloyds Register of Shipping for Department of Energy London: HMSO 1989 [OTI 88 504]

A 1 8 0 7 Sensitivity of shallow water jacket structrues to uncertainties in environmental loading Atkins Oil & Gas Engineering Ltd London: HMSO 1988, 74 pages [OTH 88 273]

A 1 8 0 9 Separated flow around marine structures: international symposium; Trondheim, 26-28 June 1985 Trondheim: IAHR 1985, 398 pages

A 1 8 1 0 Ship and planar motions: international workshop; 16-18 October 1983 YeungRW(editor) Berkeley: University of California 1984, 605 pages

A 1 8 1 2 Standardization load sequence for offshore structures: wave action standard history (WASH 1) final report Sonsino CMetal (Industrieanlagen Betriebsgesellschaft) Darmstadt: Fraunhofer Institut fur Betriebsfestigkeit 1988, 91 pages [IABG TF-2347]

A 1 8 1 3 Summary of literature study on wave-current interaction and their influence on fluid loading on slender offshore structures Karunakaren D Trondheim: SINTEF 1991, 75 pages [STF15 A91009]

A 1 8 1 5 Uncertainties in the estimation of fluid loading on offshore structures with special emphasis on wind forces Singh S London: Institute of Marine Engineers 1989,15 pages

MARINE TECHNOLOGY

A 1 8 1 7 Water wave mechanics for engineers and scientists, 2nd edition Dean R G and Dalrymple R A Singapore, London: World Scientific 1991, xiii +353 pages [Advanced Series on Ocean Engineering Volume 2]

A 1 8 1 9 Wave force experiments at the Christchurch Bay Tower with simulated hard marine fouling Bishop J R London: HMSO 1988, 9 pages [OTH 89 541]

A 1 8 2 0 Wave forces on fixed offshore structures in short crested seas Mitwally H and Novak M Journal of Engineering Mechanics 1989, Volume 115(3) pages 636-655

A 1 8 2 2 Wind loading of offshore structures: a summary of wind tunnel studies Miller B L and Davies M E Feltham: National Maritime institute [now British Martitime Technology] 1982, 68 pages [NMI R136 OT-R-8225]

SURVEYING A 1 8 2 3 Acquisition of marine surveying technologies; report of the UN Expert Group meeting; Bangkok, 28 October-1 November 1986 New York: United Nations 1987, 269 pages [UN Publication I IA18]

A 1 8 2 4 Admiralty manual of hydrographic surveying London: Hydrographer of the Navy 1965, 1969-1982, 2 volumes, 671 pages, 6 fascicles respectively, + 1 overlay and 1 supplement

A 1 8 2 8 Hydro '90: 7th biennial international symposium; Southampton, 18-20 December 1990 Dagenham: The Hydrographic Society 1990,1 volume [Special Publication 26]

A 1 8 2 9 Hydrography for the surveyor and engineer, 2nd edition Ingham A E London: Granada Technical Books 1984, xiii + 132 pages

A 1 8 3 1 Mapping and research in the exclusive zone McGregor B A and Lockwood M Washington DC: US Department of the Interior and Department of Commerce 1986, 40 pages

A 1 8 3 2 Marine positioning, symposium; Reston, VA, 14-17 October 1986 Dordrecht: Reidel, for Marine Technology Society 1987, xii + 474 pages

UNDERWATER CONSTRUCTION

A 1 8 3 4 Offshore surveying for the civil engineering industry London: Royal Institution of Chartered Surveyors 1977,116 pages

A 1 8 3 7 Surveying and charting of the seas Langeraar W Amsterdam: Elsevier Science Publishers 1984, xviii + 612 pages [Elsevier Oceanography Series 37]

A 1 8 3 8 Underwater engineering surveys Milne PH London: E & FN Spon /Routledge, Chapman Hall 1980, 366 pages

A 1 8 4 1 Diverless and deepwater technology: conference; London 22-23 February 1989 Society for Underwater Technology London: Graham & Trotman / Kiuwer 1989, viii + 151 pages [Advances in Underwater Technology, Ocean Science & Offshore Engineering, 19]

A 1 8 4 2 Effects of explosives in the marine environment: workshop on effects of explosives use in the marine environment; Halifax, 29-31 January 1985 Greene G D etal Canada Oil & Gas Lands Administration 1985, xii + 399 pages [Technical Report No 5]

A 1 8 4 3 Electricity in water: safety of divers: part 2, practical applications Diesen A et al Hovik: Det norske Veritas 1980,102 pages [Veritas Report No 80-0238]

A 1 8 4 5 International advanced robotics programme: 1 st workshop on mobile robots for subsea environments; Monterey CA, 1990 Lee M J and McGhee R B Pacific Cove, CA: Monterey Bay Aquarium Research Institute 1991, 200 pages

A 1 8 4 6 The market for underwater construction: international conference; London, 5-6 March 1987 London: Society for Underwater Technology 1987,12 papers

A 1 8 4 7 Mortality of fish subjected to explosive shock as applied to oil well severance on Georges Bank Baxter L and Hays E E Woods Hole, MA: Woods Hole Oceanographic Institution 1982, 69 pages

[MITSG 80-11 NTIS PB81 -102535]

Concise methods for predicting the effects of underwater explosions on marine life Young G A Silver Spring MD: Naval Surface Warfare Center 1991, 21 pages [NAVSWC-MP-91-220] [NTIS AD-A241 310/2]

MARINE TECHNOLOGY

A 1 8 4 8 Penetration sous-marine, underwater operations and techniques; international conference, Paris,6-8 December 1982 Paris: Editions Technip, for Association Technique Maritime et Aeronautique 1982, 498 pages

[20 papers in English, 11 papers in French]

Rules and regulations for the construction and classification of submersibles and diving systems Crawley: Lloyd's Register of Shipping 1980, looseleaf A 1 8 5 0 Rules for building and classing underwater systems and vehicles New York: American Bureau of Shipping 1979

A 1 8 5 1 Safe underwater electrical power Tucker L W and Nelson F E, for Civil Engineering Lab, US Navy Springfield, Virginia: NTIS 1980, v + 23 pages [AD A091 672]

1989 [ANSI/AWS D3.6-89]

A study of methods of measuring the metacentric heights of semi-submersibles London: HMSO (for the Department of Energy) 1985, 48 pages A 1 8 5 4 The subsea construction forecast, 2nd edition Gerard Engineering Ltd Canterbury: Smith Rea Energy Analysts Ltd 1991

A 1 8 5 5 Subsea manned engineering HauxGFK London: Bailliere Tindall / Harcourt Brace Jovanovich 1981, 500 pages

A 1 8 5 6 Subtech '89: fitness for purpose; Aberdeen, 7-9 November 1989 Society for Underwater Technology London: Graham & Trotman / Kiuwer 1990 [Advances in Underwater Technology and Offshore Engineering, 23]

A 1 8 5 7 Surface support for subsea operations Dept of Ship & Marine Technology, University of Strathclyde London: Dept of Trade & Industry 1987, 2 volumes [Resources for the Sea Programme]

A 1 8 5 8 Undersea teleopeators & intelligent autonomous vehicles: papers presented at a conference; Cambridge MA, October 1986 Doelling N & Harding E T (editors) Cambridge MA: MIT Sea Grant Program 1987, 233 pages [MITSG 87-1]

A 1 8 5 9 Undersea work systems Talkington H R New York: Marcel Dekker 1981,184 pages [Ocean Engineering Series Volume 1]

1983, x + 284 pages

Underwater blast effects from explosive severance of offshore platform legs and well conductors Connor JG Silver Spring MD: Naval Surface Warfare Center 1991,146 pages [NAVSWC-TR-90-532] [NTIS AD-A235 964/4]

DIVING

A 1 8 6 3 Underwater construction: development & potential: papers of the market for underwater construction international conference; London, 5-6 March 1987 Society for Underwater Technology London: Graham & Trotman / Kiuwer 1987,184 pages

[Advances in Underwater Technology 1]

Underwater engineering symposium: some challenges facing the industry now; Aberdeen, 2-3 November 1983 Kingston-upon-Thames: Spearhead Exhibitions (for Association of Offshore Diving Contractors 1983, 23 papers + 3 loose papers A 1 8 6 5 6th Underwater engineering symposium; Aberdeen, 7-8 November 1984 (Association of Offshore Diving Contractors) Kingston-upon-Thames: Offshore Conferences & Exhibitions and Spearhead Exhibitions 1984, 1 volume

A 1 8 6 9 Underwater technology: 15th WEGEMT school; Helsinki, 14-18 October 1991 West European Graduate Education Marine Technology Helsinki: Helsinki University of Technology 1991, 2 volumes, looseleaf

A 1 8 7 0 Underwater technology, 4th congress, with Underwater Canada '85; Toronto, 27-28 March 1985 Cox F E (editor) 186 pages

A 1 8 7 1 Underwater technology and diving: special conference topic B, Offshore; Goteborg, 104 March 1983 Goteborg: Swedish Trade Fair Foundation 1983, 5 volumes plus 2 loose papers

A 1 8 7 3 Underwater welding: international conference; Trondheim, 27-28 June 1983 Oxford: Pergamon Press (for International Institute of Welding) 1983, xiv + 394 pages

A 1 8 7 4 Underwater welding of offshore platforms and pipelines: proceedings of a conference; New Orleans, 5-6 November 1980 Miami: American Welding Society 1981, ix +189 pages

A 1 8 7 5 Underwater work programmes at 300m and beyond: 4th underwater engineering symposium; Aberdeen, 24-25 November 1982 Kingston-upon-Thames: Spearhead Exhibitions (for Society of Underwater Technology) 1982, 14 papers

DIVING A 1 8 7 6 XlVth Annual meeting on diving and hyperbaric medicine and Diving Medical Advisory Committee workshop; Aberdeen, 5-9 September 1988 European Undersea Biomedical Society 1988, 36 papers

A 1 8 7 7 Arctic underwater operations: medical and operational aspects of diving activities in arctic conditions: Icedive 1984 conference; Stockholm,3-6 June 1984 ReyL (editor) London: Graham & Trotman 1985, 356 pages

A 1 8 8 2 Commercial diving: reference and operations handbook Freitag M and Woods A Chichester: John Wiley & Sons 1983, xv+ 414 pages

A 1 8 8 4 Department of Energy diving safety memoranda: January 1974-January 1989 Submex Ltd London: HMSO 1990, 99 pages

A 1 8 8 5 Developments in diving technology: Divetech 1984 conference (for Society for Underwater Technology); London, 14-15 November 1984 London: Graham & Trotman 1985,157 pages [Advances in Underwater Technology & Offshore Engineering, Volume 1]

A 1 8 8 7 Diver training standards: Part I, basic air diving; Part II, mixed gas diving; Part III, air diving where no surface compression chamber is required on site; Part IV, air diving with self-contained equipment where no surface compression chamber is required on site Sheffield: Health & Safety Executive 1986

A 1 8 8 8 Divetech '81: the way ahead in diving technology: international conference; London 24-26 November 1981 London: Society for Underwater Technology 1981, 4 volumes

A 1 8 8 9 Diving and life at high pressures: Royal Society discussion meeting; London, 12-13 May 1983 Paton W (editor and organiser) London: The Royal Society 1984 [Phil Trans R Soc Lond B304 (3-4)]

1988, iv + 49 pages [OTH 88 279]

Diving operations at work regulations 1981 as amended by the Diving Operations at Work (Amendment) Regulations 1990: guidance on regulations Health & Safety Executive London: HMSO 1991, 56 pages A 1 8 9 2 The diving operations at work (amendment) regulations 1992 London: HMSO 1992, 4 pages

[Statutory Instrument 1992 No 608]

Diving operations: technical session 6, Oceanology International '80; Brighton, 2-7 March 1980 Brighton: BPS Exhibitions 1980,15 papers

DIVING

A 1 8 9 4 Diving, 13th annual international symposium; New Orleans, 7-9 February 1983 Gretna, Louisiana: Association of Diving Contractors 1983,169 pages

A 1 8 9 5 Emergency, contingency and safety in diving Onarheim J et al Ytre Lakesvag: Norwegian Underwater Technology Centre 1983, 34 pages [Report 2-83]

A 1 8 9 6 Emergency diving bell recovery, guidance notes (code of practice on certain aspects of the design and operation of diving bells) London: Association of Offshore Diving Contractors 1980

A 1 8 9 7 Guidance notes for safe diving European Diving Technology Committee Luxembourg: Commission of the European Communities (HMSO) 1977, 58 pages

A 1 8 9 8 Guidelines on qualifications for personnel engaged in manned underwater operations in the petroleum activity Stavanger: Norwegian Petroleum Directorate 1990 [in Norwegian and English]

A 1 9 0 0 Joint meeting on diving and hyperbaric medicine; Amsterdam, 11-18 August 1990 Bethesda MD: Undersea Medical Society 1990, vi + 184 pages [Undersea Biomedical Research, supplement to Volume 17]

A 1 9 0 1 Man underwater: 20th symposium of the Underwater Association for Scientific Research; London, 14-15 March 1986 Margate: The Underwater Association 1987, 251 pages [Progress in Underwater Science Volume 12 New Series]

A 1 9 0 2 Measurement of diver resistance and the electric fields generated near the diver by impressed current anodes and by welding Dyson RJetal London: HMSO

1988, iii + 60 pages [OTH 88-281]

NOAA Diving manual for science and technology, 2nd edition Milter J W (editor) US National Oceanic & Atmospheric Administration 1979 (various pagings) A 1 9 0 4 Offshore installations (diving operations) regulations 1974 Department of Energy London: HMSO

1974, 18 pages [SI 1974 No 1229]

Offshore medicine: medical care of employees in the offshore oil industry, 2nd edition Cox Ft A F (editor) Berlin: Springer-Verlag 1987, xix + 258 pages A 1 9 0 6 Oilfield diving: the diver's story Jacobsen NG Westwego LA: Norman H Jacobsen 1983, xii + 113 pages

A 1 9 0 8 The physiology and medicine of diving, 3rd edition Bennet P B and Elliott D H (editors) London: Bailliere Tindall 1982, 704 pages

A 1 9 0 9 The principles of safe diving practice Underwater Engineering Group in association with Association of Offshore Diving Contractors and the UK Department of Energy London: UEG 1984, 210 pages [UR23]

MARINE TECHNOLOGY

A 1 9 1 1 The professional diver's handbook, 2nd edition Sisman D (editor) London: Submex Ltd [distributed by ASR Books] 1985, 306 pages

Registration and notification of diving operations: proposals for Diving Operations at Work (Amendment) (No 2) Regulations: consultative document Health & Safety Commission London: Health & Safety Executive 1990, 18 pages A 1 9 1 3 Regulations concerning manned underwater operations in the petroleum activities Stavanger: Norwegian Petroleum Directorate 1990 [in Norwegian and English]

A 1 9 1 4 Requiem for a diver: fifteen years of diving fatalities Warner J and Park F Glasgow: Brown Son & Ferguson 1990,115 pages

A 1 9 1 5 Review of diving research programme: Part II, underwater electrical safety Moulton R J London: UEG (for Offshore Energy Technology Board) 1983, 37 pages [OTP 13]

Risk assessment of diver contingency Jacobsen E and NygaardA Ytre Laksevag: Norwegian Underwater Institute 1980, 46 pages NUTEC Report 1-80] A 1 9 1 7 Safety and rescue for divers The British Sub-Aqua Club London: Stanley Paul 1987,144 pages

A 1 9 1 9 Safety of diving operations: symposium; Luxembourg, 7-8 May 1985 (European Diving Technology Committee) London: Graham & Trotman (for Commission of the European Communities) 1986, xi + 343 pages

1985, 50 pages [Publication UR31]

Technical and human aspects of diving and diving safety symposium; Luxembourg, 9-10 October 1980 Commission of the European Communities, Safety and Health for the Mining and Extractive Industries 1981, 320 pages A 1 9 2 4 Thermal stress on divers in oxy-helium environments London: Underwater Engineering Group 1983, 51 pages [Technical Note UTN 28]

A 1 9 2 5 Underwater association code of practice for scientific diving, 4th edition Gamble JCetal (editors) Swindon: Natural Environmental Research Council 1989, looseleaf

Diving equipment

A 1 9 2 7 Underwater photography: scientific and engineering applications symposium; Woods Hole, 21-24 April 1980 Smith P F (editor) New York: Van Nostrand Reinhold 1984, x +422 pages

1989 [ANSI Z86.3-1989]

Underwater safety in the offshore oil industry: seminar; London, 16 October 1986 London: Submex Ltd 1986, 79 pages A 1 9 3 0 Underwater technology: salvaging underwater work; a manual of SCUBA commercial, salvage and construction operations, 2nd edition CayfordJE Centreville MD: Cornell Maritime Press 1966, xiii + 258

A 1 9 3 1 US Navy air decompression table handbook and recompression chamber operator's handbook Supervisor of Diving, United States Navy San Pedro: Best Publishing 1989, 211 pages

A 1 9 3 2 US Navy diving manual, volume 1: air diving, revision 2 Naval Sea Systsems Command Washington DC: US Government Printing Office 1988 [Navsea 0994-LP-001-9010]

A 1 9 3 3 US Navy diving manual, volume 2: mixed-gas diving, revision 2 Naval Sea Systems Command Washington DC: US Government Printing Office 1987 [Navsea 0994-LP-001-9020]

A 1 9 3 4 A work study of diver operations in the North Sea James GWetal Harwell: Department of Energy, Offshore Energy Technology Board (HMSO) 1985, 2 volumes [OETB Report No OT-N-85-130]

A 1 9 3 6 Care and maintenance of underwater breathing apparatus: part 1, compressed air open circuit type London: British Standards Institution 1981 [BS4001]

A 1 9 3 9 Guidelines for evaluation of breathing apparatus for use in manned underwater operations in the petroleum activities Stavanger: Norwegian Petroleum Directorate 1991

Hyperbaric chamber gas contaminant monitoring Murray B G and Marr I (Development Engineering International) Boston Spa: BLDSC 1990, 34 pages

MARINE TECHNOLOGY

1989 [ANSI/UL 1197-1989]

Offshore photography Strickland C L San Diego: Photosea Systsems Inc 1984, 47 pages A 1 9 4 4 Preliminary risk assessment for two operating scenarios with the ... transfer under pressure diving system Milo (Consultant Engineers) Ltd Boston Spa: BLDSC 1990,106 pages [OTO 90 008]

A 1 9 4 5 Review of the diving research programme: part 2, underwater electrical safety London: Underwater Engineering Group (for Offshore Energy Technology Board) 1983 [OTP 13]

A 1 9 4 7 Suggested limits for contaminants in hyperbaric chambers DEA Ltd London: Department of Energy (HMSO) 1987, 45 pages

[Offshore Technology Report OTH 86 262]

Underwater lighting fixtures New York NY: American National Standards Institute

1985 [ANSI/UL 676-1985]

Underwater safety: low pressure hose assemblies connecting first and second stages on SCUBA diving New York NY: American National Standards Institute 1987 [ANSI Z86.7.2-1987]

A 1 9 5 0 Underwater safety: low pressure hose assemblies on submersible pressure gauges for SCUBA diving: design and minimum performance requirements New York NY: American National Standards Institute

1987 [ANSI Z86.7.2-1987]

Underwater tools Hackman D J and Caudy D W Columbus, Ohio: Battetle Press 1981, vii + 152 pages A 1 9 5 2 Underwater video acceptance standards London: MTD Ltd due 1992,32 pages

A 1 9 5 5 International safety standard guidelines for the operation of undersea vehicles PritzlaffJA (editor) Washington DC: Marine Technology Society London: Society for Underwater Technology 1979

A 1 9 5 6 An inventory of some force producers for use in marine vehicle control Wilson M Bet al Bethesda, Maryland: David W Taylor Naval Ship Reserach & Development Centre 1979, 409 pages [NTIS AD-A078 423]

A 1 9 5 7 Launch, operation and recovery of underwater vehicles: current practice and problems and potential improvement: UEG seminar, 16 September 1983 London: UEG 1985, 30 pages [UEG Publication UE 30]

Underwater vehicles

1989, 44 pages [Research Notes 924]

A 1 9 5 9 Power systems for small underwater vehicles, workshops; Cambridge 5 - 6 October 1988 Cambridge MA: MIT Sea Grant Program 1988, 33 pages [Collegium Opportunity Brief 51, Report MITSG 88-11]

A 1 9 6 2 Submersibles and their use in oceanography and ocean engineering Geyer R A (editor) Amsterdam: Elsevier Science Publishers 1977, xii + 384 pages

A 1 9 6 3 Submersibles: Technical session J, Oceanology International ' 80 ; Brighton 2-7 March 1980 Brighton: BPS Exhibtions 1980, 9 papers

A 1 9 6 4 Subtech '83: the design and operation of underwater vehicles; London, 15-17 November 1983 London: Society for Underwater Technology 1983, 38 papers

A 1 9 6 5 Subtech ' 85 : Submersible technology, designing for intervention; Aberdeen, 29-31 October 1985 London: Graham & Trotman (for Society for Underwater Technology) 1986, 400 pages [Advances in Underwater Technology 5]

A 1 9 6 6 Subtech '87: Submersible technology, adapting to change; Aberdeen 10-12 November 1987 London: Graham & Trotman (for Society for Underwater Technology 1988, 336 pages

[Advances in Underwater Technology 14]

Undersea vehicles directory 1985 Arlington VA: Busby Associates 1985, 430 pages + appendices Manned submersibles & habitats

A 1 9 6 8 Deep-sea research using the submersible SHINKAI 2000 system, 5th Symposium; technical reports Yokosuka: Japan Marine Science & Technology Center 1989, 342 pages [text in Japanese with abstracts and captions in English]

1984, 139 pages [Guidance Note 022]

Deepwater oil production and manned underwater structures Jones MEW London: Graham & Trotman 1981, xx + 245 pages A 1 9 7 1 Manned submersibles Busby R F USA: Office of the Oceanographer of the Navy 1976, xii + 764 pages

A 1 9 7 2 Manned subsea operations Underwater Engineering Group London: Dept of Trade & Industry (HMSO) 1987,113 pages [Resources from the Sea Programme]

MARINE TECHNOLOGY

1980,1 volume [loose leaf]

A1974 Rules for building and classing underwater vehicles, systems and hyperbaric facilities Paramus NJ: American Bureau of Shipping 1990,1 volume

A1975 Safety standard for pressure vessels for human occupancy Fairfield NJ: American Society of Mechanical Engineers 1990 [ASME PVHO-1-1990]

A1976 Autonomous underwater vehicle technology, symposium; Washington DC, 5-6 June 1990 Piscataway NJ: Institute of Electrical & Electronic Engineers 1990, 317 pages

A1977 Guidance note on the safe and efficient operation of remotely operated vehicles London: Association of Offshore Diving Contractors

1989, 35 pages + appendices [AODC 051]

A1978 Guide to low-cost remotely operated vehicles, 1989-90 Given D (editor) Spring Valley CA: Windate Enterprises 1989, v +34 pages A1979 Intervention 88 / ROV '88, conference; Bergen 17-20 April 1988 Atteraas L (editor) Bergen: Norwegian Petroleum Society 1988, 663 pages

A1980 Intervention '89 / ROV '89, conference; San Diego 14-16 March 1989 Washington DC: Marine Technology Society 1989, x + 282 pages

A1981 Intervention '90 / ROV '90, conference; Vancouver, 25-27 June 1990 Washington DC: Marine Technology Society 1990

A 1 9 8 2 Intervention '91 / ROV '91, conference; Hollywood, FL, 21-23 May 1991 Washington DC: Marine Technology Society ROV Committee 1991, 451 pages

A 1 9 8 4 Jet-propelled remote-operated underwater vehicles guided by tilting nozzles Gangadharan S N and Krein H L Marine Technology ~* 1989, Volume 26 (2) pages 131-144

A 1 9 8 5 Lower-cost hydrocarbon production: an achievable objective utilising ROV tooling systems White J London: Marine Management (Holdings) 1989, 11 pages

A 1 9 8 7 ORIA 1985: Offshore robotique intelligence artificielle; Marseilles, 17-18 June 1985 Chambre de Commerce et d'lndustrie de Marseilles et IIRIAM avec le patronage de I'ASTEO et de Petrole Information 1985, 20 papers

A 1 9 8 9 Remotely-operated vehicles: technology, applications and markets: a state-of-the-art review Cunningham P Bedford: BHRA, Elsevier 1989, IX+ 91 pages

Underwater vehicles

A 1 9 9 0 ROV '83: remotely operated vehicles: a technology whose time has come; San Diego, 14-17 March 1983 San Diego: Marine Technology Society, San Diego Section 1983, ix + 312 pages

A 1 9 9 1 ROV '84: remotely operated vehicles technology update, a international perspective; San Diego, 14-18 May 1984 San Diego: Marine Technology Society, San Diego Section 1984, xi + 375 pages

A 1 9 9 2 ROV '85: Remotely operated vehicles, realizing operational value; San Diego, 2-4 April 1985 San Diego: Marine Technology Society, San Diego Section 1985, xi + 242 pages

A 1 9 9 3 ROV '86: Remotely operated vehicles: technology requirement - present and future (MTS, SUT and AODC); Aberdeen, 24-26 June 1986 London: Graham & Trotman 1986, 366 pages

A 1 9 9 4 ROV '87: 5th remotely operated vehicle conference; San Diego, 10-12 March 1987 San Diego: Marine Technology Society, San Diego Section 1987, ix + 337 pages

A 1 9 9 6 Unmanned free-swimming submersible (UFSS) system description Johnson HAetat Washington DC: Naval Research Laboratory 1980, 117 pages [NTIS AD-A092 539]

A 1 9 9 7 Unmanned untethered submersible technology, 3rd international symposium: Durham NH, 6-9 June 1983 Durham NH: University of New Hampshire 1984, 255 pages

A 1 9 9 8 Unmanned untethered submersible techniques, 4th International symposium ; Durham NH, 24-27 June 1985 Durham NH: University of New Hampshire Marine Systems Engineering Laboratory 1985, 372 pages

A 2 0 0 0 Unmanned, untethered submersible technology, 6th international symposium; Ellicot CityMD, 12-14 June 1989 Durham N: New Hampshire University Marine Systems Laboratory 1989, 584 pages

MARINE TECHNOLOGY

A 2 0 0 8 Electronics for ocean technology; conference; Edinburgh, 24-26 March 1987 London: Institution of Electronic & Radio Engineers 1987, 223 pages

[Statutory Instrument 1992 No 3]

Microprocessor applications in underwater technology: seminar; London, 6 November 1980 London: Society for Underwater Technology 1981, 93 pages A 2 0 1 5 Offshore computers, 1st conference; London, 3-5 November 1981 London: Offshore Conferences & Exhibitions 1982, 3 volumes (26 papers)

A 2 0 0 1 Automation for safety in offshore petroleum operations: IFIP/IFAC Symposium; Trondheim, 25-27 June 1985 Oslo: Norwegian Society for Automatic Control 1985,1 volume preprints + 1 volume papers

A 2 0 0 2 Automation in the design and manufacture of large marine systems: 16th MIT Sea Grant College Program lecture and seminar Chryssostomidis C (editor) New York: Hemisphere 1990, 298 pages

A 2 0 0 3 CRIOP: A scenario-method for evaluation of offshore control centres Ingstad O and Bodsberg L Trondheim: SINTEF 1990, 94 pages [STF75 A89028]

A 2 0 0 6 Electronic aids to navigation: position fixing, 2nd edition Tetley L and Calcutt D Sevenoaks: Edward Arnold 1991, ix + 386 pages

A 2 0 0 7 Electronics for ocean technology: conference; Birmingham 8-10 September 1981 London: Institution of Radio & Electronic Engineers 1981, 348 pages

INSTRUMENTATION

A 2 0 1 7 Offshore computers, 3rd conference; Aberdeen 5-7 June 1984 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1984, 3 volumes

A 2 0 1 9 ORIA '91; 4th offshore, robotics and artificial intelligence symposium: telerobotics in hostile environments; Marseille, 11-12 December 1991 Marseille: IIRIAM 1991, 550 pages

A 2 0 2 0 Submarine telecommunication and power cables Barnes C C Stevenage: Peter Peregrinus (for IEE] 1977, xi i+ 206 pages

A 2 0 2 1 Subsea control and data acquisition: technology and experience, international conference; London, 4-5 April 1990 Society for Underwater Technology London: Kiuwer Academic 1990, viii + 203 pages [Advances in Underwater Technology and Offshore Engineering Vol 22]

A 2 0 2 2 Subsea control and data acquisition for oil and gas production systems: SUT conference; London, 22-23 April 1986 London: Graham & Trotman 1986, 265 pages [Advances in Underwater Technology and Offshore Engineering Vol 7]

INSTRUMENTATION A 2 0 2 4 Catalogue of marine instrumentation Weydert M (editor) Luxembourg: Commission of the European Communities 1992, vi + 61 pages

[Marine Science & Technology EUR 13808]

Current measurements offshore: conference; London, 17 May 1984 London: Society for Underwater Technology 1984,10 papers A 2 0 2 6 Evaluation, comparison and calibration of oceanographic instruments: SUT Ocean data conference: London, 4-5 June 1985 London: Graham & Trotman 1985, 267 pages [Advances in Underwater Technology & Offshore Engineering, Volume 4]

A 2 0 2 7 Instrumentering offshore conference; Bergen, 9-11 December 1987 Oslo: Norwegian Society of Chartered Engineers 1987

A 2 0 2 8 IOC-UNEP Group of experts on methods, standards and inter-calibration, 9th session; Villefrance-sur-Mer, 5-9 December 1988 Paris: UNESCO 1989, 51 pages [Intergovernmental Oceanographic Commission Reports of Meetings of Experts and Equivalent Bodies, 45]

A 2 0 3 0 Measuring ocean waves: ocean instrumentĀ­ ation to serve science and engineering: symposium; Washington DC, 22-24 April 1981 Washington DC: National Research Council, Marine Board 1982, 300 pages [NTIS AD-A123791]

MARINE TECHNOLOGY

[ANSI/SAE AS8045]

Oilfield instrumentation & control Deighton P & Robinson G (editors) Canterbury: Smith Rea Energy Associates Ltd 1986, 440 pages A 2 0 3 3 Shell Brent B' Instrumentation Project: presentation of, and discussion on, projects results: seminar, London, 14 November 1979 London: Society for Underwater Technology 1980, 7 papers

A 2 0 3 4 Underwater acoustic modelling: principles, techniques and applications Etter P C London: Elsevier Applied Science 1990, xvi + 305 pages

A 2 0 3 5 Underwater acoustic system analysis, 2nd edition BurdicWS Englewood Cliffs: Prentice-Hall 1991, xiii +466 pages

A 2 0 3 6 Underwater imaging system performance characterization Jaffe J S Woods Hole: Woods Hole Oceanographic Institution 1988, 48 pages [Technical Report WH01 -88-33]

INSPECTION, MAINTENANCE & REPAIR A 2 0 3 7 Advances in underwater inspection and maintenance, conference; Aberdeen, 24-25 May 1989 Society for Underwater Technology London: Graham & Trotman 1990, xiv + 175 pages [Advances in Underwater Technology, Ocean Science and Offshore Engineering Vol 21]

A 2 0 3 9 Asian inspection, repair and maintenance for the offshore and marine industries: conference; Singapore, 26-28 February 1985 Singapore: Institute for International Research 1985, 2 volumes (418 + 99 pages)

A 2 0 4 0 Asian conference on inspection, maintenance & repair for the offshore & marine industries; Jakarta, 26-27 May 1987 Institute for Industrial Research and NACE 1987

A 2 0 4 1 The inspection, maintenance and repair of concrete sea structures: state of the art report Wexham Springs: Federation Internationale de la Precontainte 1982, 44 pages

A 2 0 4 2 IRM AODC '86: offshore inspection, repair, maintenace and underwater engineering industries conference; Aberdeen, 3-6 November 1986 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1986, 4 volumes

A 2 0 4 3 IRM '88, day 3: IRM in the 1990s - subsea installations, design for IRM, diving operations, the role of ROVs and robotics; day 3; Aberdeen 10 November 1988 Kingston-upon-Thames: Offshore Conference & Enxhibitions 1988, 12 papers

A 2 0 4 4 IRM '90 / ROV 90, The practical approach to offshore safety, conference; Aberdeen 6-9 November 1990 Kingston-upon-Thames: Spearhead 1990, 4 volumes

Inspection and testing

A 2 0 4 7 Ships and mobile offshore units: planned maintenance systems as a basis for survey for retention of class Hevik: Det norske Veritas 1983 [Classification Note 10.1]

Inspection and testing A 2 0 4 8 Alternatives for inspecting outer continental shelf operations Marine Board, National Research Council Washington DC: National Academy Press 1990, ix + 112 pages

A 2 0 4 9 Arctic undersea inspection of pipelines and structures Busby RF & Associates US Department of the Interior Minerals Management Service 1983, xviii + 176 pages

A 2 0 5 0 Development of inspection techniques for reinforced concrete: a state of the art survey of electrical potential and resistivity measurement for use above water level Ove Arup & Partners London: HMSO

1985, viii + 66 pages [OTH 84 205]

The effectiveness of underwater non-destructive testing: summary report of a programme of tests Techword Services (for Department of Energy) London: HMSO 1984, 67 pages [OTH 84 203] A 2 0 5 2 Guidance manual for the inspection and condition assessment of tanker structures International Chamber of Shipping, Oil Companies international Marine Forum London: Witherby & Co 1986, vii + 200 pages

1988, xii + 518 pages [OTI 88 539]

The implications of the use of linear elastic fracture mechanics in the design and inspection of welded offshore structures United Kingdom Atomic Energy Authority London: HMSO 1987, 28 pages [OTH 87 221] A 2 0 5 5 IRM '88, day 2: Underwater inspection techniques, inspection repair and maintenance philosophy, underwater repair techniques: Aberdeen, 9 November 1988 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1988,11 papers

A 2 0 5 6 Modes of inspection offshore: tried and tested techniques and their future: IRM '82 Offshore inspection, maintenance and repair conference; Edinburgh, 2-4 November 1982 London: Offshore Conferences & Exhibitions 1982,1 volume + 1 loose paper

A 2 0 5 7 Offshore inspection: change, growth and new philosophies, IRM '84, 5th Offshore inspection repair and maintenance conference; Aberdeen,5-6 November 1984 Kingston upon Thames: Offshore Conferences & Exhibitions 1984,11 papers

A 2 0 5 9 Recommended practice for ultrasonic examination of offshore structural fabrication and guidelines for qualification of ultrasonic technicians, 2nd edition Dallas: American Petroleum Institute 1988 [API RP2X]

MARINE TECHNOLOGY

A 2 0 6 0 Structural assessment of an early Southern North Sea Platform Lloyd's Register of Shipping London: HMSO 1986, 42 pages [OTH 86 212]

A 2 0 6 1 SUBMATIC: remotely operated subsea machine tool and inspection system 0 Bjorke et al Trondheim: SINTEF 1990, 25 pages [STF10 A90036]

A 2 0 6 2 Undersea inspection of subsea production systems Busby Associates Reston VA: Minerals Management Service, Technology Assessment & Research Branch 1985, x + 176,1,16,25,26 pages

Maintenance & repair A 2 0 6 5 Assessment of materials for repair of damaged concrete underwater Perry S H and Holmyard J M London: HMSO 1990, 97 pages [OTH 90-318]

A 2 0 6 6 Cost and safety effective maintenance for the offshore industry, workshop; Aberdeen 13 November 1990 London IIR Industrial 1990

A 2 0 6 7 Efficient R & M operations offshore - are operators' needs being met? IRM '82 Offshore inspection, maintenance & repair conference; Edinburgh 2-4 November 1982 London: Offshore Conferences & Exhibitions 1982, 1 volume + 2 loose papers

A 2 0 6 8 Grouted repairs to steel offshore structures: a summary report of a programme of tests carried out by Wimpey Laboratories for the Department of Energy Tech word Services London: HMSO 1985, 56 pages

[Offshore Technology Report OTH 84 202]

Grouts and grouting for construction and repair of offshore structures: a summary report London Centre for Marine Technology, Imperial College of Science & Technology London: HMSO 1988, 198 pages A 2 0 7 0 The influence of methods and materials on the durability of repairs to concrete coastal and offshore structures Leeming M B London: Underwater Engineering Group 1986, 45 pages [UEG publication UR36]

A 2 0 7 1 Maritime and offshore structure maintenance: 2nd international conference; London, 19-20 February 1986 Institution of Civil Engineers London: Thomas Telford 1986, 361 pages

A 2 0 7 2 Offshore repair and maintenance: efficiency and cost effectiveness; IRM '84 5th Offshore inspection repair & maintenance conference; Aberdeen, 5-6 November 1984 Kingston-upon-Thames: Offshore Conferences & Exhibitions Ltd 1984, 10 papers

A 2 0 7 3 Planned maintenance and repair of offshore oil and gas facilities: recent advances, best practices, conference; Aberdeen 26 March 1991 London: Henry Stewart Conference Studies 1991, 7 papers

A 2 0 7 4 Repair of major damage to the prestressed concrete towers of offshore structures Wimpey Laboratories Ltd London: HMSO 1988, 61 pages [OTH 87 250] [Concrete in the Oceans Technical Report 27]

FATIGUE, CORROSION & FOULING

A 2 0 7 6 Underwater inspection of steel offshore installations: implementation of a new approach (UEG project) London: Marine Technology Directorate 1989, xii + 237 pages [MTD 89/104]

structures: seminar; Aberdeen, September 1982 Lewis J R and Mercer A D (editors) Chichester: Ellis Horwood (for Society of Chemical Industry) 1984,156 pages

A 2 0 8 2 Corrosion fatigue crack with growth in BS4360 SOD structural steel in seawater under narrow band variable amplitude loading Thorpe T Wand Ranee A (forAERE, Harwell) London: HMSO 1986, x +73 pages

[Offshore Technology Report OTH 86 232]

Corrosion fatigue of metals in marine environments Jaske Ceetal New York: Springer-Verlag 1981, 245 pages A 2 0 8 4 Corrosion in natural waters, symposium; Atlanta, 8 November 1988 Baloun C H (editor) Philadelphia PA: American Society for Testing & Materials

1990,155 pages [STP 1086]

Corrosion in seawater systems Mercer A D Chichester: Ellis Horwood 1990 A 2 0 8 6 Cracking and corrosion BeebyA W Wexham Springs: Cement & Concrete Association 1979, 54 pages

[Concrete in the Oceans Technical Report No 1]

Detection of corrosion in submerged reinforced concete Carney R FA et al London: HMSO 1990, 63 pages [OTH 87-239] [Concrete in the Oceans Technical Report 16] A 2 0 8 8 Effectiveness of concrete to protect steel reinforcements from corrosion in marine structures Taywood Engineering Research Laboratories London: HMSO 1988, 177 pages [OTH 87-247]

A2077 Advanced tool for fast assessment of fatigue under offshore random wave stress histories Kam J C and Dover W D Proceedings of the Instn ofCivil Engineers 2 1989, Volume 87 pages 539-649 (pages 645-649, discussion)

A2078 Analysis of uncertainties in fatigue life of tubular joints in offshore structures CarrP London: HMSO 1988 [OTH 88190]

A2079 A compilation of fatigue test results for welded joints subjected to high stress/low cycle conditions, stage 1 Rosenberg TDetal London: HMSO

1991, v + 65 pages [OTI 91 552]

A2080 Corrosion and marine growth on offshore

MARINE TECHNOLOGY

A 2 0 8 9 Electro-chemical methods of corrosion monitoring for marine concrete structures Page C L and Cunningham P J London: HMSO 1988 [OTH 87-245] [Concrete in the Oceans Technical Repor 22]

FAROW: a computer program for dynamic response analysis and fatigue life estimation of offshore structures exposed to ocean waves Olufsen A et al Trondheim: SINTEF 1986, 70 pages [Report STF71 A86040] A 2 0 9 1 Fatigue and corrosion: fatigue behaviour of offshore steel structures de Back J and Vaessan GHG NTIS

1981, 551 pages [NTIS PB83-146316]

Fatigue and crack growth in offshore structures: conference; London, 7-8 April 1986 London: Mechanical Engineering Publications (MEP) 1986, 220 pages

Fatigue assessments of North Sea fixed platforms: summary report Lloyd's Register of Shipping London: HMSO 1986, vii + 28 pages [Offshore Technology report OTH 86 207] A 2 0 9 4 Fatigue behaviour of offshore structures Gupta A and Singh R P Berlin: Springer-Verlag 1986, xii + 309 pages [Lecture Notes in Engineering, Volume 22] A 2 0 9 5 Fatigue correlation study, semi-submersible platforms Potthurst R et al London: HMSO

1989, v + 64 pages [OTH 88-288]

Fatigue handbook, offshore steel structures Almar-Naess A (editor) Trondheim: TAPIR 1985, 536 pages

A 2 0 9 7 Fatigue in offshore structural steels: implications of the Department of Energy's research programme, conference; London, 24-25 February 1981 Institution of Civil Engineers London: Thomas Telford 1981, 130 pages

1986, 167 pages [Report STF71 A86022]

Fatigue of offshore structures, conference; London 19-20 September 1988 Dover W D amd Glinka G (for Engineering Integrity Society) Warley: Engineering Materials Advisory Services 1988, 351 pages A 2 1 0 0 Fatigue performance of repaired tubular joints London: HMSO 1990 [OTH 89 307]

A 2 1 0 1 Fundamental mechanisms of corrosion of steel reinforcement in concrete immersed in seawater: results from phase II Wiikins NJW and Lawrence P F London: HMSO 1989, 12 pages [OTH 87-238] [Concrete in the Oceans Technical Report 15]

A 2 1 0 2 General guidelines for corrosion testing of materials for marine applications Working Party on Marine Corrosion London: Institute of Metals 1988, 32 pages [European Federation of Corrosion Reviews & Reports No 3]

A 2 1 0 3 The influence of stress spectrum, seawater and cathodic protection on fatigue crack propagation in structural steels Thorpe T W and Carney R FA London: HMSO 1990, 48 pages [OTH 90 326]

Page 138

Corrosion control

A2104 IRM '88, day 1: Topsides, splash zone and remote monitoring systems; Aberdeen, 8 November 1988 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1988, 9 papers

A 2 1 0 8 Microbial problems in the offshore oil industry: conference; Aberdeen, 15-17 April 1986 Hill E C (editor) Chichester: John Wiley (for Institute of Petroleum) 1987, xvi + 257 pages

A2109 Microbiology influences on marine corrosion Watch M (editor) Marine Technology Society Journal 1990, Volume 24(3) pages 3-44 A 2 1 1 0 On cumulative fatigue damage in steel welded joints EideOI Trondheim: University of Trondheim, Marine Technology Centre

1983, x + 448 pages [Report UR-83-30]

Remaining life of defective tubular joints - an assessment based on surface crack growth in tubular joint fatigue tests Marine Technology Support Unit (for the Department of Energy) London: HMSO 1987, 76 pages [OTH 87 259]

A 2 1 1 3 Review of fatigue in concrete marine structures Price WUetal London: HMSO 1989, 106 pages [OTH 87-235] [Concrete in the Oceans Technical Report 12]

A 2 1 1 4 A review of information of hydrogen induced cracking and sulphide stress corrosion cracking in linepipe steels Dewsnap R Fetal (for the Department of energy) London: HMSO 1987, 215 pages [Offshore Technology Report OTH 86 256]

1986, vii + 34 pages [OTH 86 225]

Strength & fatigue analysis: the North Sea experience Bainbridge C A London: Lloyd's Register of shipping 1987,14 pages [Technical Paper No 92]

Corrosion control A 2 1 1 8 Cathodic protection of production platforms in cold seawaters: a collection of papers from NACE files Houston: National Association of Corrosion Engineers 1983,192 pages, 19 papers

MARINE TECHNOLOGY

A 2 1 1 9 Cathodic protection of reinforcement steel in concrete Berkeley KG C and Pathmanaban S Sevenoaks: Butterworth 1990, 168 pages

A 2 1 2 0 Cathodic protection of steel in real and simulated seawater environments Carney R FA et al London: HMSO 1989, 37 pages [OTH 89-542]

A 2 1 2 1 Cathodic protection: theory & practice (updated conference papers, Manchester 1982) Ashworth V and Booker CJL (editors) Chichester: Ellis Horwood (for Institution of Corrosion Science & Technology 1986, 357 pages

A 2 1 2 2 Corrosion and corrosion control for offshore and marine construction, conference; Xiamen, 6-9 September 1988 Jimei X (editor) Oxford: Pergamon for Chinese Society of Corrosion & Protection 1989, 677 pages

A 2 1 2 3 Corrosion and water technology for petroleum producers JonesL W Tulsa: OGCI 1988

A 2 1 2 4 Corrosion control in offshore environment, seminar; Stavanger, 23 August 1984 Aasvistad T (editor) Hagfors, Sweden: Uddeholm Stainless with Swedish Trade Council 1984

A 2 1 2 5 Corrosion fatigue crack growth in BS4360 grade 50D structural steel in sea water under narrow band variable amplitude loading Department of Energy London: HMSO 1986, 74 pages [OTH 86 232]

A 2 1 2 6 Corrosion offshore, a losing battle? IRM '82 Offshore inspection, maintenance and repair conference; Edinburgh, 2-4 November 1982 London: Offshore Conferences & Exhibitions 1982, 1 volume

A 2 1 2 8 A corrosion protection system for a North Sea jacket LyeRE Materials Performance 1990, volume 29(5) pages 13-18

A 2 1 2 9 Design and operational guidance on cathodic protection of offshore structures, subsea installations and pipelines London: MTD Ltd 1990, 277 pages [MTD 90/102]

A 2 1 3 1 Marine corrosion: general guidelines for corrosion testing of materials for marine applications; working party report European Federation of Corrosion London: Institute of Metals 1989

A 2 1 3 2 Marine corrosion on offshore structures: Society of Chemical Industry's Aberdeen section and Materials Preservation Group seminar; Aberdeen, 13-14 September 1979 London: Society of Chemical Industry 1981,115 pages

STRUCTURES

A 2 1 3 4 Original and maintenance painting systems for North Sea oil and gas platforms Atherton D Journal of Oil and Colour Chemists Association 1979, volume 62 (9) pages 351-358

A 2 1 3 5 Protective painting of ships and of structural steel BanfietdTA Manchester: Selection & Industrial Training Administration 1978, 108 pages

A 2 1 3 6 Recommended practice: control of corrosion on offshore pipelines Houston: National Association of Corrosion Engineers 1988[RP-06-75]

A 2 1 3 7 Survey of painting practice for protection of offshore structures Whitehouse N R Teddington: Paint Research Association 1983, 71 pages [Paper OT-O-8320]

[Studies in Environmental Science No 28]

Appraisal of marine fouling on offshore structures OldfieldDG London: Underwater Engineering Group 1980 [OTP 6] A 2 1 4 0 Appraisal of marine growth on offshore structures London: MTD Ltd 1992, 52 pages

A 2 1 4 1 Fouling and corrosion of metals in sea water: symposium,; Oban, 6-7 April 1982 Scottish Marine Biological Assn with Y-Ard Mauchline J (editor) Oban: Scottish Marine Biological Association 1982, 304 pages

A 2 1 4 3 Report of the marine fouling working party for the Director of Petroleum Engineering Division London: Underwater Engineering Group (for Department of Energy) 1980,32 pages [OTP 4]

STRUCTURES A 2 1 4 4 Advances in marine structures: conference; Dunfermline, 20-23 May 1986 Smith C S and Clarke J D (editors) London: Elsevier 1986, xii + 713 pages

A 2 1 4 5 Advances in marine structures, 2nd conference; Dunfermline, 21-24 May 1991 Smith C S and Dow R S (editors) Barking: Elsevier Applied Science 1991, 792 pages

A 2 1 4 6 Analysis of offshore structural damping with non-proportional damping McCormick M E Journal of Waterway, Port, Coastal & Ocean Engineering

1989, Volume 115(6) pages 775-792

Applied offshore structural engineering HsuTH Houston: Gulf Publishing 1984, xi i+ 204 pages

MARINE TECHNOLOGY

A 2 1 4 8 Background to new fatigue design guidance for steel welded joints in offshore structures Guidance Notes Revision Drafting Panel, UK Department of Energy London: HMSO 1984, xi + 76 pages

A 2 1 4 9 Ballasting: systems and control for offshore oil and gas development: conference; London, 10 November 1981 London: Institution of Mechanical Engineers 1982

A 2 1 5 0 BOSS '82:3rd international conference on the behaviour of offshore structures; MIT, 2-5 August 1982 Cryssostomidis C and Connor J J (editors) Washington, London: Hemisphere Publishing 1983, 2 volumes

A 2 1 5 1 BOSS '85: behaviour of offshore structures; Delft, 1-5 July 1985 BattjesJA (editor) Amsterdam: Elsevier Science Publishers 1985, xiii + 1012 pages [Developments in Marine Technology 2]

A 2 1 5 2 BOSS '88, behaviour of offshore structures; Trondheim, 21-24 June 1988 Moan T et al (editors) Trondheim: Tapir 1988, 3 volumes

A 2 1 5 3 Buckling of offshore structures: a state-of-theart review of buckling of offshore structures Ellinas C P, Supple WJand Walker A C (J P Kenny & Partners) London: Granada Technical Books (for UK Department of Energy) 1984, 512 pages

A 2 1 5 4 Buckling of shells in offshore structures Harding J E, Dowling P J and Agelidis N (editors) (Structures Engineering Services) London: Granada Technical Books Houston: Gulf Publishing 1982, 581 pages

Construction of offshore structures Gerwick B C New York, Chichester: John Wiley & Sons 1986,xvi + 552 pages A 2 1 6 0 Design against collision for offshore structures Mavrikos Y and de Oliveira J G Cambridge, Mass: MIT 1983, xii + 164 pages [Report MITSG 82-7]

A 2 1 6 1 Design and construction of concrete sea structures, 4th edition FiP London: Thomas Telford 1985, 29 pages

[C-FER Special Publication No 2]

Dynamic analysis of offshore structures: recent developments Kirk C L (editor) Southampton: CML Publications 1982,123 pages [Progess in Engineering Sciences volume 1]

STRUCTURES

A 2 1 6 6 Estimation of extreme wind force for offshore structure design Ochi M K and Murer Y Gainesville FL: Florida University Coastal & Engineers Department 1989, 44 pages [UFL/COEL TR/081]

A 2 1 6 7 Floating structures and offshore operations: workshop, Wageningen, 19-20 November 1987 van Oortmensen G (editor) Amsterdam: Elsevier Science Publishers 1987, x + 266 pages [Developments in Marine Technology 4]

A 2 1 6 9 Integrity of offshore structures, 2nd interĀ­ national symposium; Glasgow, 1-3 July 1981 Faulkner D (editor) London: Elsevier Applied Science 1981, viii + 662 pages

A 2 1 7 0 Integrity of offshore structures, 3rd international symposium; Glasgow, 28-29 September 1987 D Faulkner et al (editors) Barking: Elsevier Applied Science 1988, vi i+ 630 pages

A 2 1 7 1 integrity of offshore structures, 4th conference; Glasgow 2-3 July 1990 D Faulkner et al (editors) Barking: Elsevier Applied Science 1991, x +630 pages

A 2 1 7 2 The interaction between major engineering structures and the marine environment; Nyborg, 27-29 May 1991 Honggerberg, Switzerland: IABSE 1991 (volume 63), 31 papers

A 2 1 7 3 Introduction to offshore structures: design, fabrication, installation Graff W J Houston: Gulf Publishing 1981

A 2 1 7 4 Life expectancy assessment of marine structures Ayyub B M and White G J Marine Structures 1990, Volume 3(4) pages 301-317

A 2 1 7 7 Marine structural reliability, symposium; Arlington, 1987 Jersey City NJ: Society of Naval Architects & Marine Engineers 1987, 245 pages

A 2 1 7 8 ISMS '91 : , international symposium marine structures; Shanghai, 12-15 September 1991 Shengkun Z (editor) Shanghai: ISMS Secretariat 1991, 405 pages

A 2 1 7 9 Model testing of offshore structures at the Institute for Marine Dynamics Murray J J St John's NF: National Research Council Canada 1990,17 pages [Report LR 1990-2]

MARINE TECHNOLOGY

[Developments in Marine Technology 5]

Offshore Structures: 2nd international symposium; Rio de Janeiro, October 1979 Carneiro FLLB and Brebbia C A (editors) London: Pentech Press (John Wiley) 1980, 925 pages A 2 1 8 2 Offshore Engineering: 3rd international symposium; Rio de Janeiro, September 1981 Carneiro FLLB (editor) London: Pentech Press (John Wiley) 1982, 592 pages

A 2 1 8 3 Offshore engineering: 4th international symposium; Rio de Janiero, September 1983 Carneiro FLLB (editor) London: Pentech Press (John Wiley) 1984, 857 pages

A 2 1 8 4 Offshore engineering: 5th international symposium; Rio de Janiero, Sepstember 1985 Carneiro FLLB (editor) London: Pentech Press (John Wiley) 1986, xi i+ 832 pages

A 2 1 8 5 Offshore engineering: 6th international symposium; Rio de Janeiro, August 1987 Carneiro FLLB (editor) London: Pentech Press (John Wiley) 1988, 821 pages [Offshore Engineering 6]

A 2 1 8 6 Offshore engineering: 7th international symposium; Rio de Janeiro, August 1989 Carneiro FLLB (editor) London: Pentech Press (John Wiley) 1990, 812 pages

A 2 1 8 7 Offshore platforms and pipelines Mazurkiewicz B K Clausthat-Zellerfeld, Switzerland: Trans Tech Publications 1987,390 pages

A 2 1 9 2 Procedure for nonlinear dynamic response analysis of offshore structures Spidsoe N et al Trondheim: SINTEF 1989, 39 pages [STF A89047]

A 2 1 9 3 Programme for marine structures: summary report Eide OI and Spidsoe N Trondheim: SINTEF 1990, 43 PAGES [STF71 A89033]

A 2 1 9 6 Rules and regulations for the classification of steel ships and offshore units: material: amendments and additions No 1 Paris: Bureau Veritas 63 pages

Fixed platforms

A 2 1 9 8 Spon's fabrication norms for offshore structures: a handbook for the oil, gas and petrochemical industries London: Chapman & Hall 1992, 640 pages

A 2 1 9 9 Strength of tubular members in offshore structures Warwick D H and Faulkner D (Dept of Naval Architecture & Ocean Engineering) Glasgow: University of Glasgow 1988,162 pages [Report NAOE 88-36]

A 2 2 0 0 Study on buckling safety factors for offshore structures London: J P Kenny & Partners (distributed by BLLD) 1991, various pagings [OTO 90-030]

Tubular members in offshore structures Chen WGandHanDJ Boston, London: Pitman 1985, xi + 172 pages A 2 2 0 2 Ultimate load analysis of marine structures Soreide T H Trondheim: TAPIR 1981, 296 pages

A 2 2 0 3 Wave and wind directionality: applications to the design of structures: conference; Paris, 28 September-1 October 1981 Paris: Editions Technip 1982, 600 pages

A 2 2 0 6 Complex tubular joints: assesssment of stress concentration factors for fatigue analysis Lloyd's Register of Shipping (for Department of Energy) London: HMSO 1985,145 pages [OTH 84 200]

1989, iv + 124 pages [Publication 158]

Cost effective topside design and construction, conference; London, 27-28 October 1987 London: IBC Technical Services 1987 A 2 2 0 9 The design of fixed offshore structures Billington C J and Osborne-Moss D M London: Granada Technical Publishing 1983, 280 pages

A 2 2 1 1 Draft recommended practice for planning, designing and construction of fixed offshore platforms: load and resistance factor design Washington DC: American Petroleum Institute 1989 [Recommended Practice 2A-LRFD]

A 2 2 1 2 Dynamics of fixed marine structures, 3rd edition Barltrop N D P and Adams A J (Atkins Oil & Gas Engineering) Guildford: Butterworth-Heinemann for MTD Ltd 1991, xx + 764 pages

MARINE TECHNOLOGY

A 2 2 1 8 The integrity of platform superstructures: analysis in accordance with API RP2A BunceJ W London: Harper Collins 1985, iv + 108 pages

A 2 2 2 0 The marine installation and offshore completion of the protective barrier around the Ekofisk 2/4 stoage tank Broughton P and Davies R L London: Marine Management (Holdings) Ltd 1990, 17 pages

A 2 2 2 1 Noise and vibration control procedures for offshore installations: guidance for project managers London: Underwater Engineering Group 1981, 31 pages [Report UR19]

A 2 2 2 2 NPD's guidlines for safety evaluation of platform conceptual design: seminar; Hanko, 25-27 May 1981 Oslo: Norske Siviligeniorers Forening 1981, loose-leaf

A 2 2 2 3 North Sea, West Sole field platform WE: post-removal condition report and lifetime performance review London: BP Trading 1979

A 2 2 2 4 Offshore installations (design, construction and survey) regulations, 1982 and amendment St John's: Gazetted 21 July 1982 and 13 August 1982, 33 pages [Newfoundland Regulations 183/82]

A 2 2 2 5 Offshore installations: guidance on design, construction and certification, 4th edition UK Department of Energy London: HMSO 1990, looseleaf in binder

A 2 2 2 6 Offshore installations: guidance on design and construction: final draft St John's: Newfoundland & Labrador Petroleum Directorate 1982, 165 + 82 pages

A 2 2 2 8 Offshore platforms monitoring programmes, use of full-scale data: a preliminary investigation Birkinshaw M and Atkins N London: HMSO 1990, 56 pages [OTH 89-295]

A 2 2 3 0 OWEC '85: 3rd Offshore weight engineering conference: Aberdeen, 24-25 April 1985 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1985,11 papers

Fixed platforms

A 2 2 3 1 OWEC '87: Offshore weight engineering conference; London, 7-8 April 1987 Kingston-upon-Thames: Offshore Conferences & Exhibitions 1987,11 papers

A 2 2 3 5 Platform superstructures: design and construction Boswell L F (editor) London: Granada Technical Publishing 1984, 296 pages

A 2 2 3 6 Protection of offshore installations against impact; background report J P Kenny & Partners Ltd London: HMSO 1988, 266 pages

A 2 2 3 7 Recommended practice for planning, designing and constructing fixed offshore platforms, 19th edition Washington DC: American Petroleum Institute 1991, 159 pages' [API RA 2A]

A 2 2 3 8 Recommended practice for planning, designing and constructing fixed offshore structures in ice environments, 1st edition Washington DC: American Petroleum Institute 1988 [API RP 2N]

A 2 2 3 9 Recommended practice for planning, designing and constructing heliports for fixed offshore platforms, 3rd edition Dallas: American Petroleum Institute 1986 [API RP2L]

A 2 2 4 4 Rules for the construction and inspection of offshore installations: volume 1, offshore units (marine structures), preliminary edition Hamburg: Germanischer Lloyd 1976, 220 pages

A 2 2 4 6 Sensitivity of fixed offshore platforms to uncertainties in design parameters Lloyd's Register of Shipping, Offshore Division London: HMSO 1988, Iv pages [OTH 88-254]

A 2 2 4 7 Sensitivity of the reliability of a fixed offshore platform: an investigation using level II techniques Williams R and Tsivanidis H London: HMSO 1989, iii + 71 pages [OTH 89-544]

MARINE TECHNOLOGY

A2248 Study of sensitivity of a jacket design to sea current profile London: HMSO 1987, 240 [OTH 87-267]

A2249 Study on topside weight reduction Global Engineering Glasgow: Offshore Supplies Office 1987, 3 volumes

[An extended summary is published separately]

A2250 Technical notes for fixed offshore installations: volume A, structures Hovik: Det norske Veritas 1981 with subsequent amendments, looseleaf A2251 Technical notes for fixed offshore installations: volume B, facilities Hovik: Det norske Veritas 1981 with subsequent amendments, looseleaf

A2252 Topside design and construction, 3rd international conference; London 6-7 March 1989 London: IBC Technical Services 1989,1 volume

A2253 Topside Engineering for offshore Europe; Newcastle, 13-14 June 1990 Newcastle: The Newcastle Oil Symposium 1990, 13 papers

A2254 Weight symposium; Haugesund, 3-5 March 1986 Oslo: Norsk Sivilingeniorers Forening 1986, 13 papers

A2255 Weight engineering, international conference; London 17-19 April 1991 Oslo: Norwegian Society of Chartered Engineers 1991

Tension-leg platforms A2256 Compliant offshore structures Patel M H and Witz J A Guildford: Butterworth 1991, 416 pages

A2257 A guide to the analysis of floating structures, research report Lopndon: Marine Technology Directorate due late 1992

A2258 Recommended practice for planning, designing and constructing tension leg platforms, 1st edition Washington DC: American Petroleum Institute 1987, 145 pages [API RP 2T]

A2259 The response of floating platforms to subsea blowouts Milgram J H and McLaren W G, Department of Ocean Engineering Cambridge MA: MIT 1982,114 pages [Report 82.8]

A2260 System reliability analysis of structural systems Lee J S and Faulkner D, Department of Naval Architecture & Ocean Engineering Glasgow: University of Glasgow 1988,193 pages

A2261 Tension leg platform: a state of the art review Demirbilek Z New York: American Society of Civil Engineers 1989, 352 pages

A2262 Tension-leg platforms from Hutton to Joliet, or deep water without deep pockets Faulkner D, Department of Naval Architecture & Ocean Engineering Glasgow: University of Glasgow 1988, 20 pages [Report NAOE 88-26]

Mobile platforms A 2 2 6 3 BP SWOPS - an operator's and shipbuilder's perspective Parker T J Naval Architect 1988, March, pages 21-37

A 2 2 6 4 Code for the construction and equipment of mobile offshore drilling units, 1989 (1989 MODU code) London: International Maritime Organization 1990, 101 pages [IMO-811 09.05 E]

A 2 2 6 5 Construction of a semi-submersible accommodation rig in a Japanese shipyard MacleodA K London: institute of Marine Engineers 1987 [meeting paper preprint]

A2266 Design for reliability in deepwater floating drilling operations Harris L M Tulsa: Pennwell 1979, 274 pages

A2267 The design of moonpools for subsea operations Day AH Marine Technology 1990, Volume 27(3) pages 167-179

A2268 Guidelines for site specific assessment of mobile jackup units London: Noble Denton Consultancy 1990

A2269 The jack-up drilling platform: design and operation seminar; London 25-27 September 1985 Boswell L F (editor) London: Granada 1986, 340 pages

A2270 The jackup drilling platform, 2nd international conference; London, 26-27 September 1989 Boswell L F and d'Mello C A (editors) Barking: Elsevier Applied Science 1990, xviii + 290 pages

Mobile platforms

A 2 2 7 1 The jack-up drilling platform, 3rd conference; London, 24-25 September 1991 Boswell L F (editor) London: City University, School of Engineering 1991,18 papers

A 2 2 7 2 Long term response analysis of dynamically sensitive jack-up platforms Karunakaren D Trondheim: SINTEF 1991, 61 pages [STF25 A91028]

A 2 2 7 3 Mobile offshore structures and risk assessment of buoyancy loss, conference; London 14-18 September 1987 London: City University 1987

A 2 2 7 4 Offshore station keeping, 1st symposium; Houston, 1-2 February 1990 Houston TX: Society of Naval Architects & Marine Engineers 1990,1 volume + 1 loose paper

A 2 2 7 5 PRADS '87, Practical design of ships & mobile units, 3rd international conference; Trondheim, 1987 Trondheim: Norwegian Institute of Technology 1987, 2 volumes

A 2 2 7 6 PRADS '89, Practical design of ships & mobile units, 4th international symposium; Varna, Bulgaria, 1989 Varna: Bulgarian Ship Hydrodynamics Centre 1989, 2 volumes

A 2 2 7 8 Regulations for mobile offshore units 1991 regulations laid down by the Norwegian Maritime Directorate Oslo: Fabritius Forlag 1990, 721 pages

MARINE TECHNOLOGY

A 2 2 8 2 Semi-submersibles: the new generations: internatiional symposium; London, 17-18 March 1983 London: Royal Institution of Naval Architects 1983, 15 papers

A 2 2 8 5 A study of the methods of measuring the metacentric heights of semi-submersibles National Maritime Institute (for the Department of Energy) London: HMSO 1985, v + 41 pages [OTH 84 211 ]

BUOYS A 2 2 8 6 Aspects of buoy design Tsinipizoglou S Glasgow: University of Glasgow Marine Technology Programme 1983,10 pages [Report NAOE-83-21]

A 2 2 8 9 Experiments with conical and cylindrical moored buoys Yilmaz O Glasgow: Glasgow University Department of Naval Architecture & Ocean Engineering 1990, 32 pages [Report NAOE 90-20]

Mooring and tanker loading A 2 2 9 0 Design and construction specification for marine loading arms Oil Companies International Marine Forum London: Witherby 1981

A 2 2 9 1 Design and construction specification for marine loading arms, 2nd edition Oil Companies International Marine Forum London: Witherby 1987

A 2 2 9 2 Dynamic response of a tanker moored to an articulated loading platform Gernon B J and Lou JYK Ocean Engineering 1987, Volume 14/6 pages 489-512

Page 150

PIPELINES

A 2 2 9 4 Guidelines for deepwater port single-point mooring systems Flory J Fetal Springfield VA: NTIS 1977 [NTIS AD-A050 182]

A 2 2 9 5 Guide on marine terminal fire protection and emergency evacuation, 1st edition Oil Companies International Marine Forum London: Witherby & Co 1987

A 2 2 9 6 International safety guide for oil tankers and terminals, 3rd edition International Chamber of Shipping, Oil Companies International Marine Forum and International Association of Ports and Harbours London: Witherby & Co 1988, xvi + 204 pages

1990, July, pages 13-16

Recommendations for equipment employed in the mooring of ships at single-point moorings, 2nd edition Oil Companies international Marine Forum London: Witherby 1988 A 2 3 0 0 Rules for building and classing single-point moorings New York: American Bureau of Shipping 1975,1985, 1 volume* 1 supplement

A 2 3 0 2 Single-point mooring maintenance and operations guide Oil Companies International Marine Forum London: Witherby & Co 1985

A 2 3 0 4 SPM Hose ancilliary equipment guide: a guide providing common descriptive terminology and technical recommendations for the designers and operators of SPM systems, 3rd edition OH Companies International Marine Forum London: Witherby 1987,15 pages

PIPELINES A 2 3 0 5 Advances in offshore oil and gas pipeline technology de la Mare R F (editor) London: Oyez Scientific & Technical Services (ASR Books) 1985, ix + 383 pages

A 2 3 0 6 Aspect '90: advances in subsea pipeline engineering and technology, SUT conference; Aberdeen 30-31 May 1990 Eltinas C P (editor) Dordrecht, London: Kiuwer Academic Publishers 1990 XII +374 pages [Advances in Underwater Technology & Offshore Engineering, Volume 24]

MARINE TECHNOLOGY

A 2 3 0 8 Design methods for multiphase hydrocarbon transpsort systems Lenn C P and Fairhurst P (editors) Glasgow: Blackie & Sons Ltd 1990, 320 pages

A 2 3 0 9 The development of guidelines for the assessment of the submarine pipeline spans: overall summary report Raven PW J London: HMSO

1986, vi + 56 pages [OTH 86 231]

Flexible pipe technology: conference; Oslo, 23-24 September 1986 Oslo: Norwegian Petroleum Society 1986, 12 papers A 2 3 1 1 Gas transmission and distribution pipline systems: ASME code for pressure piping, B31: an American National Standard New York: American Society of Mechanical Engineers 1986 [ASME/ANSI B31.8-1986 with addenda B31.8a-1986 issued 1987]

[English-French and French-English]

Guidance notes in support of the Offshore installations (emergency pipe-line valve) regulations 1989: SI 1989/1029 Department of Energy London: HMSO 1991 A 2 3 1 4 Guidelines for flexible pipes Hevik: Det norske Veritas 1987, 77 pages [JIP/GFP-02]

A 2 3 1 5 Handbook on design and operation of flexible pipes Berge S et al Trondheim: SINTEF 1992, 377 pages [STF70 A92006]

A 2 3 1 6 Hydrodynamic forces on seabed pipelines Veriey RLPetal Journal of Waterway, Port, Coastal & Ocean Engineering, ASCE 1989, Volume 115/2, pages 172-189

A 2 3 1 7 Installation of steel flowlines from diving support vessels Sriskandarajab T London: Institute of Marine Engineers 1988,11 pages

A 2 3 1 8 The integrity of offshore pipeline girth welds ... Slater G and Davey T G (for the Department of Energy London: HMSO 1986, 209 pages [OTH 86 223]

A 2 3 1 9 The integrity of offshore pipeline girth welds: the influence of hydrogen on the fracture toughness of cellulosic coated electrode weld deposits Came MMP and Slater G London: HMSO

1988, vi + 24 pages [OTI 88 524]

Internal and external protection of pipes, proceedings of 7th international conference; London, 21-23 September 1987 Cranfield: BHRA 1987, 214 pages A 2 3 2 1 IP Model Code Part 6: Pipeline safety code; supplement to 4th edition Institute of Petroleum London: Institute of Petroleum 1988, 60 pages

A 2 3 2 2 Liquid transportation systems for hydrocarbons, liquid petroleum gas, anhydrous ammonia and alcohols: ASME code for pressure piping, B312: an American National Standard New York: American Society of Mechanical Engineers 1987 [ASME/ANSI B31.4-1986]

PIPELINES

A 2 3 2 3 Marine and offshore pumping and piping systems Crawford J Sevenoaks: Butterworth 1981, 392 pages

A 2 3 2 4 Maritime and pipeline transportation of oil and gas: problems and outlook; conference, Montreal, 23-24 April 1990 Pokier A andZaccour G (editors) Paris: Editions Technip 1991, 320 pages

A 2 3 2 5 Multi-phase flow in pipeline systems: its transfer, measurement and handling King NW (editor) London: HMSO 1990, various pagings

A 2 3 2 6 North Sea pipelines: a survey of technology, regulation and use conflicts in oil and gas pipeline operation Nothdurft WE Boston, MA: New England River Basins Commission

1980, x + 68 pages [NTIS PB80-165848]

North Sea pipeline systems Canterbury: Smith Rea Energy Analysts 1989 [Offshore Business No 29] A 2 3 2 8 Offshore oil and gas pipeline technology seminar; London,, 20-21 January 1987 London: IBC Technical Services 1987, 16 papers [subsequent conferences: Offshore pipeline technology]

A 2 3 2 9 Offshore pipeline conference; The Hague, 25-26 January 1984 Delft: Netherlands Industrial Council for Oceanology 1984, 9 papers

1988, vi + 25 pages [OTI 80-525]

Offshore pipeline girth welds: non-destructive testing Mudge P J London: HMSO

1989, vi + 96 pages [OTI 88-530]

Offshore pipeline girth welds: the factors influencing mechanised mig weld metal toughness Hart P H M and Hutt G A London: HMSO

1988, vi + 98 pages [OTI 88-528]

Offshore pipeline girth welds: vertical-up weld metal database Stager G London: HMSO 1988, vi +12 pages [OTI 88-529] A 2 3 3 7 Offshore pipeline technology conference; Stavanger, 27-28 January 1988 London: IBC Technical Services 1988,15 papers A 2 3 3 8 Offshore pipeline technology European seminar; Amsterdam, 1-2 February 1989 .London: IBC Technical Services 1989,1 volume A 2 3 3 9 Offshore pipeline technology European seminar; Paris, 809 February 1990 London: IBC Technical Services 1990.17 papers

MARINE TECHNOLOGY

A 2 3 4 1 OMAE 1990; 9th offshore mechanics and arctic engineering conference, Volume V Pipelines; Houston, 18023 February 1990 New York: American Society of Mechanical Engineers

1990, viii + 198 pages

OMAE 1991; 10th offshore mechanics and arctic engineering conference, Volume V: pipeline technology; Stavanger, 23-28 June 1991 New York: American Society of Mechanical Engineers 1991, 211 pages A 2 3 4 3 Model Code of Safe Practice, Part 6; Supplement, ???? Institute of Petroleum Chichester: John Wiley 1986, 60 pages]

A 2 3 4 5 The pipe protection conference; Cannes, 23-25 September 1991 J Tiratsoo (editor) London: Elsevier Applied Science 1991, viii + 269 pages

A 2 3 4 8 Pipeline technology conference; Oostende, 15-18 October 1990 Denys R (editor) Antwerp: Royal Flemish Society of Engineers 1990, 2 volumes + 1 loose paper

A 2 3 5 3 Pipeline engineering symposium 1984: 7th annual energy sources technology conference; New Orleans, 12-16 February 1984 Seiders E J (editor) New York: American Society of Mechanical Engineers

1984, v + 110 pages

Pipelines for marginal fields; Dyce, 26-28 September 1988 Tiratsoo JNH (editor) Beaconsfield: Scientific Surveys 1989, 291 pages A 2 3 5 5 Pipeline inspection, maintenance and repair: seminar; London, 3 March 1983 London: Society for Underwater Technology 1984, 129 pages

PIPELINES

A 2 3 5 8 Recommended practice, Volume E: pipelines and risers-onbottom stability design of submarine pipelines Hovik: Det norske Veritas 1988, vii + 41 pages [RP E305]

A 2 3 5 9 Recommended practice for design and installation of offshore production platform piping systems, 5th edition Washington DC: American Petroleum Institute 1991 [API RP 14E]

A 2 3 6 6 Scour around submerged pipelines in alternating current Dahi T E and Yanbao L, Norwegian Hydrotechnical Laboratory Trondheim: SINTEF 1988, 15 pages [Report STF60 A88015]

A 2 3 7 0 Static and dynamic analysis of offshore pipelines during installation Larsen C M Trondheim: Norges Tekniske Hogskole 1976 [Report SK/M35]

A 2 3 7 1 Statpipe: application of deep water pipelaying technology: conference: Stavanger, 17 November 1983 Stavanger: ONS Foundation 1983, 10 papers

1982, 51 pages [Sections 1 & 2 only]

Submarine pipelines (inspectors etc) regulations 1977 UK Department of Energy London: HMSO

1977, 8 pages [SI 1977 No 835]

Submarine pipelines safety regulations 1982 London: HMSO 1982, 10 pages [SI 1982 No 1513]

MARINE TECHNOLOGY

A 2 3 7 6 A survey of pipelines in the North Sea: incidents during installation, testing and operation Protech International BV Netherlands Industrial Council for Oceanology 1979

A 2 3 7 7 The UK pipeline industry offshore: success or failure? symposium: London, 23 November 1982 London: Pipeline Industries Guild 1983

1988, Volume 114(4), pages 472^86

Wave forces on pipelines Wailingford: Hydraulics Research Station 1982 [Offshore Energy Technology Board Report, OT-R-8232] A 2 3 8 0 Wave forces on pipelines: addendum, effects of surface roughness Walliingford: Hydraulics Research Station 1982 [OT-R-8233]

A 2 3 8 1 Welded and seamless wrought steel pipes: an American National Standard New York: American Society of Mechanical Engineers 1985, vii +30 pages [ANSI/ASME B36.10 M-1985]

A 2 3 8 2 Workshop on ice scouring and design of offshore pipelines; Calgary, 18-19 April 1990 Ottawa: Canada Oil & Gas Lands Administration 1990, 499 pages

A 2 3 8 8 Flexible risers, special issue of papers from meeting: London 9 January 1989 Taylor R Eatock (editor) Engineering Structures 1989, Volume 11(4), pages 205-292

A 2 3 8 9 Investigation into optimised design of flexible riser systems Brown PAetal London: Marine Management (Holdings) Ltd 1989,10 pages

A 2 3 9 0 A mathematical model for compliant risers Patrikalakis N M and Chryssostomidis C Cambridge MA: MIT Sea Grant College Program 1985, 79 pages [MITSG Report No 85-17]

SUBSEA PRODUCTION SYSTEMS

A 2 3 9 1 Proposed offshore installations (emergency pipe-line valve) regulations 1989 Department of Energy London: Department of Energy 1989, Iv (various pagings)

A2392 Recommended practice for design, rating and testing of marine drilling riser couplings Washington DC: American Petroleum Institute May 1984, 15 pages [API RP 2R]

A2393 Subsea isolation systems: design and installation; seminar, London 3 October 1990 Swindon: Knighton Enterprises Ltd 1990, 10 papers

SUBSEA PRODUCTION SYSTEMS A2394 Applications of subsea systems Goodfellow Associates Tulsa: PennWell 1990, 300 pages

A2395 A comparison of wet and dry subsea installations: seminar; London, 13 January 1983 London: Society for Underwater Technology 1984, 100 pages

A2396 Design and installation of subsea systems: Subsea International '85 (SUT); London, 15-16 January 1985 London: Graham & Trotman 1985, 247 pages

[Advances in Underwater Technology 2]

A2397 Developments in sub-sea engineering systems: international symposium; London, 14-15 May 1985 London: Royal Institution of Naval Architects 1985, 2 volumes A2398 Factors governing the progress of diverless subsea production on the United Kingdom continental shelf Glasgow: Offshore Supplies Office 1991, various pagings

A 2 3 9 9 Failure mode and effect analysis of a subsea production system Deegan F J and Burns D J Transactions, Institute of Marine Engineers 1990, Volume 102(3) pages 191-199

A 2 4 0 0 Future development of offshore oil and gas fields by subsea production methods MohrHand Booth D Houston, Inverkeithing: Oil Business Information Service 1984, 130 pages

[Advances in Underwater Technology 10]

Progress in subsea engineering Jones G (editor) Bedford UK: BHRA 1989,140 pages [10 papers] A 2 4 0 4 Production systems conference: Session P, Offshore Northern Seas; Stavanger, 26-29 August 1986 Oslo: Norwegian Petroleum Society 1986, 8 papers

A 2 4 0 5 Recommended practice for design and operation of subsea production systems, 1st edition Washington DC: American Petroleum Institute 1987 [API RP 17A]

A 2 4 0 6 Recommended practice for installation, maintenance and repair of surface safety valves offshore, 3rd edition Washington DC: American Petroleum Institute 1991, 13 pages [API RP 14H]

MARINE TECHNOLOGY

1989, 145 pages [Report STF75 A89038]

Requirements for design guidelines on subsea installations: the report of a project definition study London: UEG

1984, 32 pages [Publications UR 27]

Safety and reliability of subsea production systems Hovik: Det norske Veritas 1985, 27 pages [Guideline No 1-85] A 2 4 1 0 Satellite & marginal field, 2nd conference; London, 4-5 May 1991 Hitchin: Offshore Conference Services 1991 A 2 4 1 1 Satellite developments in the oil industry, seminar; London 13-14 May 1991 London: IBC Technical Services 1991

A 2 4 1 2 Specification for wellhead surface safety valves and underwater safety valves for offshore service, 8th edition Washington DC: American Petroleum Institute 1991 [API Spec 14D]

1989, 126 pages [Report STF75 A89040]

Subsea '87: subsea trends for shallow and deep water, new fields and satellites; Heathrow, 3-4 December 1987 Chipping Norton: The Hawkedon Partnership 1986, 13 papers

A 2 4 1 5 Subsea '88: subsea systems: today's technology-tomorrow's technology; London, 1-2 December 1988 Chipping Norton: Subsea Engineering News 1988,14 pages

A 2 4 1 9 Subsea International '89. Second generation subsea production systems; London, 25-26 April 1989 SUT London: Graham & Trotman 1989, xvii + 245 pages [Advances in Underwater Technology, Ocean Science & Offshore Engineering, Vol 20]

ANCHORING & MOORING

A 2 4 2 3 Subsea production systems: prevention of corrosion problems, conference; Trondheim, 26-27 January 1988 Trondheim: Trondelag Korrosjonstekniske Forening 1988,11 papers

A 2 4 2 5 Subsea separation and transport; Oslo, 6 October 1987 Oslo: Norwegian Society of Chartered Engineers Rugby: Institution of Chemical Engineers 1987, 111 pages

A 2 4 2 6 Subsea separation and transport II; Oslo, 1-2 March 1989 Oslo: Norwegian Society of Chartered Engineers 1989,11 pages

ANCHORING & MOORING A 2 4 3 1 Anchoring of floating structures Tirant P Le and Meunier J (editors) Paris: Editions Technip 1990, xvii +225 pages [Design Guides for Offshore Structures Vol 2] Translated from the French: Ancres et iignes d'ancrage

[Guides Practiques sur les Ouvrages en Mer]

Design considerations for the use of ropes and cables in the marine environment: opportunity brief No 42; MIT Marine Industry colloquium Cambridge MA: MIT Sea Grant Program 1986, 20 pages [MITSG 86-12] A 2 4 3 6 Draft bulletin on the design of windlass wildcats for floating offshore structures, 1st edition Washington DC: American Petroleum Institute 1988 [API Bull 25]

A 2 4 3 7 Monohull mooring study for the Department of Energy: final report Houlder Offshore Engineering Boston Spa: BLLD 1990, 65 pages [OTO-90-003]

MARINE TECHNOLOGY

A 2 4 3 8 Mooring chain failure on semi-submersible drilling rigs: a statistical review EllixDM Havik: Det norske Veritas Harwell: MaTSU (distributed by BLLD) 1990, 5 pages

[Offshore Technology Report OTO 89-014]

Mooring dynamics for offshore applications: part 1, theory; part 2, applications Triantafyltou MSetal Cambridge Mass: MIT Sea Grant College Program

1986, 2 volumes [MITSG 86-1 and 86-2]

Mooring equipment guidelines, 1st edition OH Companies International Marine Forum London: Witherby 1992,125 pages A 2 4 4 1 Moorings guidance: dynamic aspects and safety factors Garen O et al; Det norske Veritas Boston Spa: BLDSC 1990, 35 pages [Report OTO 90-009] A 2 4 4 2 Mooring Systems: a state of the art review Skop R A Journal of Offshore Mechanics & Arctic Engineering

1988, Volume 110(4) pages 365-372

Offshore moorings: conference; East Kilbride, 10 March 1982 Institution of Civil Engineers London: Thomas Telford 1982,164 pages A 2 4 4 4 The oil rig mooring handbook, 2nd edition VendrellJ Glasgow: Brown Son & Ferguson 1985, 38 pages, 7 charts

A 2 4 4 6 Recommended practice for in-service inspection of mooring hardware for floating drilling unit, 1st edition Washington DC: American Petroleum Institute 1987, 41 pages [API RP 21]

A 2 4 4 7 Recommended practice for the analysis of spread mooring systems for floating drilling units, 2nd edition Dallas: American Petroleum Institute 1987 51 pages [API RP 2P]

A 2 4 4 8 Recommended practices for design, analysis and maintenance of mooring for floating production systems, 1st edition Washington DC: American Petroleum Institute 1991 [API RP 2FP1]

A 2 4 4 9 Research on behaviour of piles as anchors for buoyant structures Ove Arup & Partners (for the Department of Energy) London: HMSO 1986, vii+80 pages

[Offshore Technology Report OTH 86 215]

Review of current methods for analysing the characteristics of mooring systems with particular reference to non-linear response and extreme mooring forces: part 1, analytical methods ChanH London: Lloyd's Register of Shipping 1980, 45 pages [Hull Structures Report 80/21] A 2 4 5 1 Specification for mooring chain, 5th edition Dallas: American Petroleum Institute 1988 [API Spec 2F]

A 2 4 5 2 Spread mooring systems: Rotary drilling, unit V lesson 2 Petroleum Extension Service, University of Texas at Austin and International Association of Drilling Contractors 1976

GEOTECHNOLOGY

A 2 4 5 4 The use of anchors in offshore petroleum operations PuechA Paris: Editions Technip 1984,160 pages

A 2 4 5 5 Wire rope in offshore applications: a review of wire rope research Chaplin C R and Potts A E (University of Reading) London: Marine Technology Directorate 1988, vii + 166pages [MTD 99/100]

A 2 4 5 6 Wire rope offshore: a critical review of wire rope endurance research affecting offshore applications Reading University for HSE and MTD Ltd London: HMSO 1991, 335 pages [OTH 91 341 ]

A 2 4 5 8 Applied high-resolution geophysical methods: offshore geoengineering hazards TrabantPK Hemel Hempstead: Simon & Schuster for IHRDC

1984, 279 pages

3rd Canadian conference in marine geotechnical engineering; St John's, 11-13 June 1986 St John's: C-CORE 1986, 2 volumes A 2 4 6 0 CRC Handbook of techniques for aquatic sediments sampling Murdoch A and Macknight S D Boca Raton: CRC Press 1991, 208 pages

A 2 4 6 1 Geotechnical aspects of coastal and offshore structures: symposium; Bangkok, 14-18 December 1981 Yudhbir and Balasubramanamian A S (editors) Rotterdam: A A Balkema 1983, 280 pages

A 2 4 6 3 Marine geotechnology and nearshore/offshore structures; symposium, Shanghai 1 ^ November 1983 Chaney R C and Fang H Y Philadelphia: ASTM 1986, x + 372 pages [STP 923]

A 2 4 6 4 Recommended practice, Volume D: Structures-site investigation for offshore structures Hovik: Det norske Veritas 1987, iv + 8pages[RP D301]

A 2 4 6 5 Seabed mechanics: International Union of Theoretical & Applied Mechanics symposium; Newcastle upon Tyne, 5-9 September 1983 Denness B (editor) London: Graham & Trotman 1984, xxi +281 pages

1989, Volume 115 (6), pages 727-739

Sediment transport by currents and waves, handbook Rijn L C van Delft: Delft Hydraulics 1989, loose-leaf and floppy disk A 2 4 6 8 Shear waves in marine sediment, conference; La Spezia, Italy, 15-19 October 1990 Hovem J Metal (editors) Dordrecht: Kiuwer 1991, 612 pages

MARINE TECHNOLOGY

A 2 4 6 9 The strength of grouted pile-sleeve connections for offshore structures; static tests relating to sleeve buckling Wimpey Offshore Engineers & Constructors London: HMSO 1986, 59 pages [OTH 85 223]

A 2 4 7 0 Strength testing of marine sediments: laboratory and in-situ measurements Chaney R C and Demars Philadelphia: ASTM 1985, 557 pages [STP 883]

A 2 4 7 1 Understanding the arctic sea floor for engineering purposes National Research Council, Marine Board Washington DC: National Academy Pres 1982, 141 pages

A 2 4 7 2 Wave-induced breakout of half-buried marine pipes Foda MAetal Journal of Waterway, Port, Coastal & Ocean Engineering (ASCE) 1990, Volume 116(2) pages 267-286

A 2 4 7 4 Geotechnical properties of deep sea sediments: a critical review of measurement techniques Schultheiss P J Wormley: Institute of Oceanographic Sciences 1982, 73 pages [Report No 134]

A 2 4 7 5 Geotechnical investigation of UK test sites for the foundations of offshore structures Thomas S (McLelfand Ltd) London: HMSO 1990, 287 pages [OTH 89-294]

A 2 4 7 6 Marine geotechnics: an introduction to site investigation practice McQuillan R et al London: Graham & Trotman 1981

A 2 4 7 7 Offshore seismic exploration: data acquisition, processing and interpretation Verma R K Houston: Gulf Publishing 1987, 608 pages

A 2 4 7 8 Offshore site investigation: conference; London, 6-8 March 1979 Ardus D A (editor) London: Graham & Trotman 1980, iv + 291 pages

[Advances in Underwater Technology 3]

The pressuremeter and its marine applications, symposium; Paris, 19-20 April 1982 Paris: Editions Technip 1982: 440 pages A 2 4 8 1 The pressuremeter and its marine applications, 2nd international symposium Briaud and Audibert (editors) Philadelphia: ASTM 1986, 508 pages [STP 950]

A 2 4 8 2 Seabed reconnaissance and offshore soil mechanics for the installation of petroleum structures ie Tirant P Paris: Editions Technip 1979, 508 pages [English translation]

A 2 4 8 3 Study of the superficial sea sediments by the measurement of the reflexion co-efficient Sousounis IG Washington DC: NTIS 1983, 167 pages [DE 84751541/WOT]

Foundations

[Guides Practiques sur les Ouvrages en Mer 3]

Capacity of offshore friction piles in clay: opportunity brief No 44 MIT Marine Industry Collegium Cambridge Mass: MIT Sea Grant Program 1986, 21 pages [MITSG 86-14] A 2 4 8 6 Foundation of offshore structures; bibliography Stuttgart: Information Centre for Regional Planning & Building Construction 1989, 76 pages [ICONDA Bibliography No 39]

A 2 4 8 7 Geotechnical and hydraulic aspects with regard to seabed and slope stability Kroezen M et al Delft; Delft Hydraulics Laboratory 1982, 13 pages [Publication 272]

A 2 4 8 8 Geotechnical practice in offshore engineering: conference; Austin.Texas, 27-29 April 1983 Wright SG (editor) New York: American Association of Civil Engineers 1983, 629 pages

A 2 4 8 9 Local scour and scouring protection of drilling platforms in the arctic sea environment Rytkoenen J Springfield VA: NTIS 1983, 91 pages [NTIS PB84-157262]

A 2 4 9 0 Numerical methods in offshore piling: 3rd international conference; Nantes, 21-22 May 1986 Paris: Editions Technip 1987, 544 pages

A 2 4 9 1 Pieux dans les formations carbonatees ARGEMA Paris: Editions Technip 1988,192 pages [Guides Practiques sur les Ouvrages en Mer 4]

A 2 4 9 2 Reliability of offshore foundations: state of the art WuTHetal Journal of Geotechnical Engineering 1989, Volume 115(2), pages 157-178

1990, x + 22 pages [Report OTH 89.296]

Research on the behaviour of piles as anchors for buoyant structures; final report Building Research Establishment (for the Department of Energy, BP International and Britoil) London: HMSO 1986,1 folder A 2 4 9 5 A review of current practice in the design and installation of piles for offshore structures St John HD London: Underwater Engineering Group 1980,152 pages [OTP 5]

1986, 225 pages [ESRF Report 017]

Scour below pipelines in waves Sumer B Murtlu and Fredsee J Journal of Waterway, Port, Coastal & Ocean Engineering (ASCE) 1990, volume 116(3) pages 307-323 A 2 4 9 9 Scour prevention techniques around offshore structures: seminar; London, 16 December 1980 London: Society for Underwater Technology 1980 pages

MARINE TECHNOLOGY

A2500 Scouring Breusers HNC and Raudkivi A J Rotterdam: Balkema 1990,190 pages

[Hydraulic Structures Design Manual No 8]

A2501 Seafloor scour: design guidelines for ocean-founded structures Herbich J B et al New York: Marcel Dekker 1984, xi + 320 pages A2502 Soil reaction stresses on offshore gravity platforms Lacasse S and d'Orazio T B Journal of Geotechnical Engineering 1988, Volume 114(11) pages 1277-1299

A2503 Statement of research needs in offshore foundation design London: Society for Underwater Technology Geotechnics Committee 1982, 13 pages

A2504 The strength of grouted pile-sleeve connections Wimpey Offshore Engineers & Constructors London: HMSO 1986, 152 pages [OTH 86 210]

A2505 A study of length, longitudinal stiffening and size effects on grouted pile-sleeve connections Wimpey Offshore Engineers & Constructors London: HMSO 1987, vi + 53 pages [OTH 86 230]

ELECTRICAL EQUIPMENT & POWER SUPPLY A2506 Analysis of characteristics for underwater power systems Wiborg J Hovik: Det norske Veritas 1981, 45 pages [Report 81 -1163]

A 2 5 0 7 Code of practice for the safe use of electricity underwater, 2nd edition London: International Association of Offshore Diving Contractors 1985,105 pages

A 2 5 1 0 Electrical safety code, (Model Code of Safe Practice in the Petroleum Industry, Part 1), 6th edition Institute of Petroleum Chichester: John Wiley 1991, vii + 46 pages

A 2 5 1 1 Electrical systems for oil and gas production facilities Bishop D N Research Triangle Park, NC: Instrument Society of America 1988, iv + 82 pages

A 2 5 1 2 Electricity in water: safety of divers: part 1, fundamental principles Diesen A Ytre Laksevag: Norwegian Underwater Institute 1980, 64 pages [NUTEC Report 5-80]

MATERIALS

A 2 5 1 5 Power plants for offshore platforms: conference; 3 November 1981 Bury St Edmunds: Mechanical Engineering Publications 1982, 70 pages

A 2 5 1 6 Recommended practice for design and installation of electrical systems for offshore production platforms, 3rd edition Washington DC: American Petroleum Institute 1991 [API RP 14F]

A 2 5 1 7 Recommendations for the electrical and electronic equipment of mobile and fixed offshore installations London: IEE 1983, x + 149 pages

A 2 5 1 8 Recommended practice for classification of locations for electrical installations at petroleum facilities, 1st edition Washington DC: American Petroleum Institute 1991 [RP500]

A 2 5 1 9 Regulations for the electrical and electronic equipment of ships with recommended practice for their implementation, 6th edition Hitchin: Institution of Electrical Engineers 1990, xx + 216 pages

A 2 5 2 2 Underwater electrical equipment: some guidance on protection against shock Mole G London: Underwater Engineering Group 1979, 79 pages [Report UR14]

A 2 5 2 3 Underwater power source study Newhouse H L and Payne P Ft (for US Department of the Navy, Naval Air Systems Command) Springfield VA: NTIS 1981, 57 pages [Report No NADC-81157-30] [NTIS AD-A112644]

MATERIALS A 2 5 2 5 Composites at sea: structurally used composites and piping on board vessels and platforms; conference, Rotterdam, 13-14 March 1990 Harderwijk: Ketel Consulting BV for European Pultrusion Technology Association 1990, 11 papers

A 2 5 2 6 Design guide on the use of aluminium in offshore structures Wimpey Offshore and Alcan Offshore Ledbury: Oilfield Publications Ltd 1990, 3 volumes

A 2 5 2 7 Design of marine structures in composite materials Smith C S Barking: Elsevier Applied Science 1989, xiv + 392 pages

A 2 5 2 9 OMAE 1990: 9th offshore mechanics and arctic engineering conference, Volume III, materials engineering; Houston, 18-23 February 1990 New York: American Society of Mechanical Engineers 1990, 2 volumes

MARINE TECHNOLOGY

A 2 5 3 0 OMAE '91:10th offshore mechanics and arctic engineering conference, Volume 111, materials engineering; Stavanger, 23-28 June 1991 New York: American Society of Mechanical Engineers 1991, 2 volumes

A 2 5 3 1 Polymers in a marine environment, 2nd international conference; London, 13-16 October 1987 London: Institue of Marine Engineers 1989, 233 pages

A 2 5 3 2 Polymers in a marine environment, 3rd international conference; London, 23-24 October 1991 London: Institute of Marine Engineers 1992

A 2 5 3 3 Polymers in offshore engineering, 3rd international conference; Gleneagles, 14-16 June 1988 London: Rubber and Plastics Institute 1988,1 volume + 1 loose paper

A 2 5 3 4 Rubber in offshore engineering: conference; London, 13-15 April 1983 Stevenson A (editor) Bristol: Adam Hitger 1984, xii + 346 pages

A 2 5 3 5 Study on lightweight materials for offshore structures Fulmer Research Institute and Wimpey Offshore Glasgow: Offshore Supplies Office 1987, 2 volumes

[an extended summary is published separately]

Tribology offshore, Tribology Group seminar; 10 May 1984 Bury St Edmunds: Mechanical Engineering Publications 1985, 83 pages

Concrete A 2 5 3 7 Applications for concrete offshore: report of project for UEG Pelt Frischmann Offshore under the supervision of Bayly D R London: Underwater Engineering Group 1982,147 pages [Report UR20]

A 2 5 3 8 Behaviour of concrete caisson and tower members Regan P E and Hamadi Y D Wexham Springs: Cement & Concrete Association 1980

[Concrete in the Oceans technical report No 4]

Classification and identification of typical blemishes visible on the surface of concrete underwater McAlpine Sea Services London: HMSO 1985, ix + 135 pages [OTH 84 206] [Concrete in the Oceans Technical Report No 9] 1988 Supplement [OTH 87 261] A 2 5 4 0 Concrete in the marine environment, 2nd international conference; St Andrews, Canada, 21-26 August 1988 Detroit: American Concrete Institute 1988, vii + 739 pages [SP-109]

1989, viii + 225 pages [OTH 87-248]

Concrete in the oceans: management summary of the whole programme Sharp JVetal (Department of Energy) London: HMSO

1989, v + 19 pages [OTH 87 249]

Concrete offshore in the nineties: COIN London Centre for Marine Technology London: HMSO 1990 [OTH 90 320]

Concrete

A2544 Concrete ships and floating structures convention; Rotterdam, November 1979 Turner F H (editor) London: Thomas Reed Publications 1980, 23 papers

A2545 Designing for temperature effects in concrete offshore oil-containing structures Richmond B et al London: Underwater Engineering Group 1980, 116 pages [Report UR17]

A2546 The effect of temperature variation on creep of concrete Bamforth P B London: Underwater Engineering Group 1980, 44 pages [Technical Note UTN 19]

A2547 Effectiveness of concrete to protect steel reinforcement from corrosion in marine structures Taywood Engineering Research Laboratories London: HMSO 1989 [OTH 87 247] [Concrete in the Oceans Technical Report 24]

A2548 Effects of temperature gradients on walls of oil storage structures Clarke J L and Symmons R M Wexham Springs: Cement & Concrete Association 1979, 54 pages

[Concrete in the Oceans Technical Report 3]

A2549 Effects of temperature gradients on the walls of concrete oil storage structures Clarke J L and Williams A London: HMSO 1987 [OTH 87-234] [Concrete in the Oceans Technical Report 11 ]

A2550 Exposure tests on reinforced concrete in seawater Stilwell J A (Department of Energy) London: HMSO 1989 [OTH 87 246] [Concrete in the Oceans Technical Report 23]

A2551 Factors affecting the design for corrosion protection in concrete offshore and marine structures Fidjestol P et al London: HMSO 1987 [Report OTH 87 237] [Concrete in the Oceans Technical Report 14]

A2552 Fatigue and corrosion fatigue performance of 16mm diameter reinforcing steel Austen IM London: HMSO 1988 [OTH 87-241] [Concrete in the Oceans Technical Report 18]

A2553 Fatigue and corrosion fatigue strength of reinforced concrete in seawater Paterson WSetal London: Cement & Concrete Association 1982

[Concrete in the Oceans Technical Report 7]

A2554 Fatigue strength of reinforced concrete in seawater: results from Phase II Paterson W S and Dill M J London: HMSO 1988, 57 pages [OTH 87-248] [Concrete in the Oceans Technical Report 20] A2555 Handbook for design of undersea, pressure-resistant concrete structures Haynes H H and Rail R D (for Naval Civil Engineering Laboratory) Washington DC: NTIS 1986, 105 pages [AD-A176 233/5/WOT] A2556 Marine concrete Marshall A L Glasgow; Blackie 1990, xii + 401 pages

A2557 Marine concrete: concrete in the marine environment conference; London, 22-24 September 1986 London: The Concrete Society 1986, 446 pages

MARINE TECHNOLOGY

A 2 5 5 8 Marine durability survey of the Tongue Sands tower Taylor Woodrow Construction Wexham Springs; Cement & Concrete Association 1980

[Concrete in the Oceans Technical Report No 5]

Modes of failure of concrete platforms Dowrick D J Wexham Springs: Cement & Concrete Association 1979, 35 pages

[Concrete in the Oceans Technical Report No 2]

Offshore structures of concrete, bibliography Stuttgart: Information Centre for Regional Planning & Building Construction (IRB) 1989, 107 pages [ICONDA Bibliography No 44] A 2 5 6 1 Performance of concrete in marine environment: conference; St Andrews New Brunswick, 1980 Malhotra VM (editor) Detroit: American Concrete Institute 1980, 627 pages [Publication SP-65] A 2 5 6 2 Research needs for the application of lightweight aggregate concrete in sea water Harris RJS London: Underwater Engineering Group 1981, 48 pages [Technical Note UTN 22]

A 2 5 6 3 A review of methods for design against implosion of concrete cylinders in offshore structures Chrapowicki KA and Boon R D London: HMSO 1988, 54 pages [OTH 87-236] [Concrete in the Oceans Technical Report 13]

A 2 5 6 4 Surveys of existing concrete marine structures Taylor Woodrow Research Laboratories London: HMSO 1991 [OTH 87-244] [Concrete in the Oceans Technial Report 21]

A 2 5 6 5 Tenue des ouvrages en beton en mer / Behaviour of offshore conrete structures: 2nd international colloquium; Paris, 12-14 October 1982 Brest: CNEXO 1983, 557 pages

[25 papers in French, 7 papers in English]

Underwater concreting and repair McLeish A Sevenoaks: Edward Arnold due 1992, 288 pages

[Guide practique sur les ouvrages en mer]

Assessment of fracture mechanics fatigue predictions of T-butt welded connections with complex stress fields Sharpies J Ketal London: HMSO 1989, 34 pages [OTI 88-536] A 2 5 6 9 Background to new fatigue design guidance for steel welded joints in offshore structures UK Department of Energy London: HMSO 1984

A 2 5 7 0 Background to the new static strength for tubular joints in steel offshore structures Wimpey Offshore London: HMSO 1990 [OTH 89-308]

A 2 5 7 1 Bayesian techniques in remaining life calculations for welded joints of jacket structures Wickham AHS and Frieze P A Transactions of the Institute of Marine Engineers 1990, Volume 102(3) pages 183-189

Steel

A2572 Cohesive buckling programme report Kenny J P & Partners Boston Spa: BLDSC 1990, 2 volumes [OTO 90-005]

A2573 Compendium of fracture toughness data on weldments University of Strathclyde, Division of Mechanics of Materials, Materials Testing Laboratories London: HMSO 1988, 59 pages [OTI 88-534]

A2574 Grouted and mechanical strengthening and repair of tubular steel offshore structures Harwood R G and Shuttleworth E P London: HMSO 1988, 251 pages + 17 microfiches [OTH 88-283]

A2575 Offshore structures of steel, bibliography Stuttgart: Information Centre for Regional Planning & Building Construction (IRB) 1989, 78 pages

A2576 OTJ '88: recent developments in tubular joints technology; Egham, 4-5 October 1989 UEG Offshore Research London: UEG 1988, 14 papers

A2577 Recommended practice for preproduction qualification for steel plates for offshore structures, 1st edition Washington DC: American Petroleum Institute 1987 [API RP2Z]

A2578 Residual stresses in y-nodes and PW joints Porter GoffRFDetal London: HMSO

1989, iv + 31 pages [OTH 89-315]

A2579 Single-sided welding of closure joints in large tubular fabrication: final summary report The Welding Institute London: HMSO 1990 [OTH 90-3335]

A2580 Specification for carbon manganese steel plate for offshore platform tubular joints, 6th edition Washington DC: American Petroleum Institute 1990 [API Spec 2H]

A2581 Specification for fabricated ssstructural steel pipe, 4th edition Washington DC: American Petroleum Institute 1990 [API Spec 2B]

A2582 Specification for steel plates for offshore structures, produced by thermo-mechanical control processing (TMCP), 2nd edition Washington DC: American Petroleum Institute 1990 [API Spec 2W]

A2583 Specification for steel plates, quenched-and-tempered, for offshore structures, 2nd edition Washington DC: American Petroleum Institute 1990 [API Spec 2Y]

A2584 Static strength of large-scale tubular joints: test programme and results Wimpey Offshore London: HMSO 1989 [OTI 89-543]

A2585 Steel in marine structures: 3rd international ECSC offshore conference (SIMS '87); Delft, 15-18 June 1987 Noordhoek C and de Back J (editors) Amsterdam: Elsevier Science Publishers 1987, xx + 954 pages [Developments in Marine Technology, 3]

A2586 Stress concentration factor data from large-scale tubular joints MaA London: HMSO

1988, iii + 49 pages [OTH 88-284]

A2587 United Kingdom Offshore Steels Research Project: Phase 1 Peckover R et al London: HMSO 1988 [OTH 88-282]

MARINE TECHNOLOGY

A2588 United Kingdom Offshore Steels Research Project: Phase 1: research contract reports Marine Technology Support Unit for the Department of Energy London: HMSO 1988, 39 pages [OTI 89-540]

A2589 United Kingdom Offshore Steels Research Project, Phase II: project task reports Pergamon Technical Services (editors) London: HMSO 1990 [OTH 89-310]

A2590 United Kingdom Offshore Steels Research Project, Phase II: summary of project task reports Tech word Services London: HMSO 1991 vi + 160 pages [OTH 89-266]

A2591 United Kingdom Offshore Steel Research project, phase II: final summary report editorial panel of UKOSRP-II Programme Steering Committee London: HMSO

1987, vi + 133 pages [OTH 87-265]

A2592 Welded tubular joints Association de Recherche sur les Structures Metaitiques Marines Marshall N (translator from French) Paris: Editions Technip 1987, xxi + 323 pages