In two diagrams (Figures 6 and 7), the achieved yield test : load of the (strength depending on design) related to the theoretical yield load of the section ). In two further diagrams (Figures 8 and 9), the ratio load-bearing capacity/theoretical ultimate load section recorded. In the values. In the diagrams 2 and 4 (Figures 7 and 9) a statistical evaluation of results is presented. design is realized inserted plate, the weld and the hollow section are calculated. for the allowable load of the hollow section, a evident from the diagrams that reduction has to since the theoretical yield or load-bearing capacity of the tube cannot be reached. The diagrams represent a first evaluation of tests. to be extended in their range of validity through

doi:10.1201/9781482271355-177

Chapter

In two diagrams (Figures 6 and 7), the achieved yield test

Chapter

load of the (strength depending on design) related to the theoretical yield load of the section ). In two further diagrams (Figures 8 and 9), the ratio load-bearing capacity/theoretical ultimate load section recorded. In the values. In the diagrams 2 and 4 (Figures 7 and 9) a statistical evaluation of results is presented. design is realized inserted plate, the weld and the hollow section are calculated. for the allowable load of the hollow section, a evident from the diagrams that reduction has to since the theoretical yield or load-bearing capacity of the tube cannot be reached. The diagrams represent a first evaluation of tests. to be extended in their range of validity through

ABSTRACT

In two diagrams (Figures 6 and 7), the achieved yield load of the test specimen (strength depending on design) has been related to the theoretical yield load of the hollow section (PO.Z/ (A' fy,k) ). In two further diagrams (Figures 8 and 9), the ratio load-bearing capacity/theoretical ultimate load at rupture of the hollow section (PMX / (A' fu,k» has been recorded. In the diagrams 1 and 3 (Figures 6 and 8) a generating curve of an envelope has been defined above which are all test values. In the diagrams 2 and 4 (Figures 7 and 9) a statistical evaluation of results is presented.