chapter
Table of contents
Pages 8

Phase angle determination and interrelationships within bituminous materials 43 G. Rowe

Evaluation of initial road performance correlating with different tests of binders 53 G. Malkoç

Laboratory study of environmental performance of binders by headspace gas chromatography 61 J.E. Poirier, C. Gueit, L. Fanouillet & G. Durand

New fatigue test on bituminous binders and mastics using an annular shear rheometer prototype and waves propagation 69 J. Van Rompu, H. Di Benedetto, G. Gauthier & T. Gallet

Functional forms for master curve analysis of bituminous materials 81 G. Rowe, G. Baumgardner & M. Sharrock

Linear viscoelastic spectra of asphalt binders from DSR and BBR 93 I.B. Kazatchkov, P. Michalica, J. Stastna & L. Zanzotto

Principal component analysis of rheological and hardening data from bituminous binders 99 E. Nielsen

Rheological and functional evaluation of the interactions between bitumen and rubber 109 E.J. Peralta, H.M.R.D. Silva, J.C. Pais & A.V. Machado

A thermodynamic approach to healing in bitumen 123 N. Kringos, A. Scarpas, T. Pauli & R. Robertson

Nanoclay for binder modification of asphalt mixtures 133 M.F.C. van de Ven , A.A.A. Molenaar & J. Besamusca

First-principles investigation of the multiple phases in bituminous materials: The case of asphaltene stacking 143 A.J.M. Schmets, N. Kringos, A. Scarpas, C.P. Duif, G. Schitter & T. Pauli

The morphology of SBS modified bitumen in binders and in asphalt mix 151 H. Soenen, X. Lu & P. Redelius

2. Testing and modeling the influence of climate and ageing effects Developing a test method for the accelerated ageing of bituminous mixtures in the laboratory 163 N. Piérard & A. Vanelstraete

Chemical characterization of laboratory and field bitumen aging in Porous Asphalt Concrete 173 E.T. Hagos, A.A.A. Molenaar & M.F.C. van de Ven

Influence of temperature and aging on laboratory fatigue performance of asphalt mixtures 185 I. Artamendi, B. Allen & P. Phillips

Aging of SBS polymer in hot and cold bituminous coatings. Relationship between microstructure and performances: Low temperature and cohesion properties 195 C. Gueit, M. Robert & G. Durand

Impact of freeze-thaw cycles on the performance of asphalt mixture based permeability 205 J. Yi, D. Feng & D. Wang

Formulation of authoritative temperature gradients for an analytical design process of flexible pavements using statistical techniques 215 S. Kayser & F. Wellner

Performance evaluation of prepared gelled hot sealant in cold climates 227 AI A1-Hadidy & Yi-qiu Tan

Age hardening behaviour of bituminous stabilized materials 239 M.E. Twagira & K.J. Jenkins

Investigation of friction properties of various road surfaces affecting road safety 251 T. Pellinen, M. Currie & J. Valtonen

Combined experimental and numerical analysis of moisture infiltration in the modified Lottman test 261 N. Kringos, A. Scarpas & H. Azari

Assessment of moisture effect on open graded mixes using water sensitivity and Cántabro after immersion tests 271 B. Rubio, R. Jiménez, F. Pérez & A. Martínez

Moisture damage on bituminous stabilized materials using a MIST device 283 M.E. Twagira & K.J. Jenkins

Determination of gradual reduction of the flexible pavement bearing capacity 295 G. Fodor, C. Capitanu & T.C. Damian

Testing of low temperature behaviour of asphalt mixtures in bending creep test 303 M. Pszczoła & J. Judycki

Effect of beam size on the creep stiffness of asphalt mixtures at low temperatures 313 R. Velásquez, M. Marasteanu, M. Turos & J. Labuz

Assessment of water sensitivity of asphalt rubber mixtures for wearing course 323 F.A. Batista, M.L. Antunes & P. Fonseca

Development of a laboratory bituminous mixtures ageing protocol 331 C. de la Roche, M. Van de Ven, W. Van den bergh, T. Gabet, V. Dubois, J. Grenfell & L. Porot

3. Hot bituminous mixtures characterization and design Optimum loading speed for deformation strength test of bitumen mixtures 349 S.H. Baek, J.C. Kim, Y.S. Doh & K.W. Kim

Enhanced algorithms for the derivation of material parameters from triaxial cyclic compression tests on asphalt specimen 357 K. Kappl & R. Blab

Reliability and suitability for standardization of methods for HMA density measurements: Experimental investigation on transverse vs longitudinal variations 367 F.G. Praticò, R. Ammendola & A. Moro

Research on coordinating deformation between Fiber Bragg Grating strain sensor and asphalt mixture 377 D. Zejiao, T. Gengliang & T. Yiqiu

Influence of treatments on the surface characteristics of aggregate 387 D.Q. van Lent, A.A.A. Molenaar & M.F.C. van de Ven

Mix design of grouted porous asphalt concrete for wearing course layers 399 M. la Agostinacchio, D. Ciampa & S. Olita

“Liquefaction” of asphalt caused by cyclic loading, as a potential reason of extreme rutting 409 G. György, F. Wellner & I. Herle

Experimental investigation on the dynamic properties of asphalt concrete using filler with waste hydrated lime 423 M. Arabani, H.R. Joodi & V. Shakeri

Monitoring and designing of wearing courses for orthotropic steel decks throughout the five-point bending test 433 A. Houel, T.L. N’Guyen & L. Arnaud

Evaluation of modified bitumen, High Modulus Asphalt Concrete and steel mesh as materials for road upgrading 443 M. Tušar, M. Ravnikar Turk, W. Bańkowski, L.G. Wiman & B. Kalman

Theoretical investigation of the stress distribution in a Bimodular IDT specimen 453 S. Katicha & G. Flintsch

Investigation of Alkali-Silica Reaction in asphalt mixtures exposed to potassium acetate deicing solution 463 A.K. Apeagyei, L.J. Struble & W.G. Buttlar

Laboratory tests used in Cuba as low financial resources country for the evaluation of the mechanical properties of the asphalt mix 477 R. Herrera de la Rosa

Polypropylene fiber modification of asphalt by using mechanical and optical means 487 S. Tapkın, Ş. Özcan, M. Tuncan & A. Tuncan

Evaluation of Petroleum-Contaminated Soil effect on the properties of hot-mix asphalt concrete using dynamic modulus |E*| and indirect tensile tests 497 H.F. Hassan

Overview of the LOT meso mechanical research into porous asphalt raveling 507 M. Huurman, L. Mo, M.F. Woldekidan, R.N. Khedoe & J. Moraal

Monitoring the introduction of Enrobé à Module Élevé class 2 onto UK roads 519 R.C. Elliott, R. Perera, A. Hunter, J.C. Nicholls, N.B. Meite & D. James

On the fracture properties of epoxy asphalt mixture with SCB test 531 X. Chen, H. Li & Z. Qian

Viscoelastic response of asphalt-aggregate mixes to transient confining conditions 541 E. Levenberg & J. Uzan

Evaluation of creep compliance of rubberized asphalt in compare with conventional hot mix asphalt 551 M. Arabani & S.M. Mirabdolazimi

Characterizing volumetric deformation behavior of naturally occurring bituminous sand materials 559 J.K. Anochie-Boateng & E. Tutumluer

Alternative materials for asphalt mixture-steel slags 569 E. Diaconu & Ş.M. Lazăr

Evaluation on the shear performance of asphalt mixture through triaxial shear test 575 J. Yang, H. Zhu & Z. Chen

Development of a Dog-Bone Direct Tension Test (DBDT) for asphalt concrete 585 C. Koh, G. Lopp & R. Roque

Evaluation of performance grading parameters for crumb rubber modified asphalt binders and mixtures 597 N. Tabatabaee, H.A. Tabatabaee, M.R. Sabouri & P. Teymourpour

4. Warm and cold bituminous mixtures characterization Design method for cold and warm emulsion mixtures based on links between laboratory and field 609 J.P. Serfass, X. Carbonneau, B. Eckmann & J.P. Triquigneaux

Fundamental property evaluation of styrene monomer modified warm-mix asphalt concrete 619 I. La, M.Y. Ryu, H.H. Kim, K. Ahn, Y.S. Doh & K.W. Kim

An evaluation of use of synthetic waxes in warm mix asphalt 627 F. Cardone, V. Pannunzio, A. Virgili & S. Barbati

Study of the mechanical behaviour of gravel-emulsions using triaxial tests 639 P. Hornych, V. Gaudefroy, J.L. Geffard & S. Goyer

Laboratory performance-based assessment of half-warm mix asphalts with high recycling rate by means of the factorial experiment design approach 651 F. Olard, E. Beduneau, N. Seignez, S. Dupriet & D. Bonneau

Evaluation of the rheological behaviour of Warm Mix Asphalt (WMA) modified binders 661 H.M.R.D. Silva, J.R.M. Oliveira, E.J. Peralta & C.I.G. Ferreira

Author index 675

5. Cracking in bituminous pavement materials Modeling of Top-Down Cracking (TDC) propagation in asphalt concrete pavements using fracture mechanics theory 681 M. Fakhri, M. Farokhi & P.T. Kheiry

The cracking device with temperature control for the laboratory identification of the road material performance 693 M. Dicu & M. Lobază

Mode II cracking in asphalt concrete 699 A. Braham & W. Buttlar

Experimental study on resistance to cracking of bituminous mixtures using the Fénix test 707 F. Pérez, R. Botella & G. Valdés

Fatigue effects in uniaxial cyclic tensile stress test: The link between stiffness decrease and accumulation of irreversible strain 715 K. Mollenhauer & M. Wistuba

Experimental study of the waveform shape effect on asphalt mixes fatigue 725 D. Bodin, J.-M. Balay, M. Merbouh, D. Breysse & L. Moriceau

Experimental investigation of crack propagation in asphalt concrete 735 R.A. Tarefder & E.M. Kias

Theoretical analysis of the 4 point bending test 749 M. Huurman & A.C. Pronk

Investigation of the PH model as a prediction tool in fatigue bending tests with rest periods 761 A.C. Pronk & A. Cocurullo

Fatigue behaviour of bitumen in tension-compression loading mode: Rheological analysis and comparison with mix fatigue 773 E. Chailleux, D. Bodin, C. de La Roche, M. Leguern & N. Vignard

Mixed-mode cracking in asphalt concrete 785 A. Braham, C. Peterson & W. Buttlar

Fatigue lines for asphalt mixtures used in wearing course 795 C. Răcănel, C. Romanescu, M. Dicu, A. Burlacu & C. Surlea

Mechanism of fatigue crack growth and fracture behavior in bituminous roads 807 R. Lugmayr, M. Jamek & E.K. Tschegg

Simplified fatigue performance modeling of ALF pavements using VECD+3-D Finite Element Modeling 817 B.S. Underwood, Y.R. Kim, S. Savadatti, S. Thirunavukkarasu & M.N. Guddati

Size effect investigation on fracturing of asphalt concrete using the cohesive softening Discrete Element Model 827 H. Kim, M.N. Partl, M.P. Wagoner & W.G. Buttlar

6. Fundamental laboratory test methods and models On the importance of performing accurate material characterization tests for bituminous materials 839 N. Kringos & A. Scarpas

Prediction of rutting risk of bituminous concrete using complex modulus 849 K. Ait Mokhtar, E. Ghorbel, S. Saoula & S. Haddadi

Application of simplified VECD modeling to the fatigue life prediction of asphalt concrete mixtures 859 B.S. Underwood, E.T. Hou & Y.R. Kim

Experimental observation of asphalt mix characteristics in the range of low temperatures 869 P. Mondschein & J. Valentin

Calibration and validation of a visco-elasto-plastic constitutive model for bituminous conglomerates 879 N. Baldo, M. Pasetto, N. Kringos, C. Kasbergen & A. Scarpas

Modulus measurement: European standardisation possibilities 889 X. Carbonneau, Y. Legal & S. Quigniot

The influence of the specimen shape on the results of the uniaxial tensile test 899 C. Weise & A. Blasl

Experience with triaxial loading systems for the testing of road construction materials 909 P. Hyzl, D. Stehlik, M. Varaus & P. Zdralek

The estimation of the dynamic modulus of asphalt mixture from creep test results 917 F. Martinez & S. Angelone

Application of a balanced mix-design concept to thin asphalt overlay mixes: Minimizing rutting and reflective-cracking 927 L.F. Walubita & T. Scullion

3D finite element modeling of polymer modified asphalt base course mixes 939 X. Liu & A. Scarpas

Neural networks in rheology: Theory and application 949 M. Oeser & S. Freitag

7. Test methods and models for permanent deformation Permanent deformation behaviour of bituminous mixtures containing incinerator bottom ash aggregates under uniaxial testing conditions 961 M.M. Hassan & H.A. Khalid

A new performance related test method for rutting prediction: MSCRT 971 S. Dreessen, J.P. Planche & V. Gardel

Effect of binder type on the permanent deformation resistance of asphalt mix at different temperatures 981 M. Smiljanic, I. Pap & U. Tatic

Rutting evaluation of asphalt binders and mixes 989 T.L.J. Wasage, I.B. Kazatchkov, J. Stastna & L. Zanzotto

An integrated approach to modeling rutting of flexible pavements 999 V.T. Thushara & J. Murali Krishnan

Equiviscous temperature based on Low Shear Viscosity: Evaluation as binder indicator for rutting and critical discussion of the test procedure 1009 J. De Visscher & A. Vanelstraete

The effect of volumetric properties of asphalt concrete mixture to wheel track rutting with respect to EN and BS rutting test methods 1019 A. Nikolaides & E. Manthos

Rutting resistance of SMA determined with triaxial and wheel-tracking tests 1029 J.L.M. Voskuilen & M.F.C. van de Ven

Rut resistance of asphalt concretes of different aggregate gradation 1039 K. Zhdanyuk, O. Volovyk, V. Zhdanyuk & Y. Prusenko

8. Field methods for structural behavior assessment Damage identification in flexible pavements using FWD technique 1049 A. El Ayadi, B. Picoux & C. Petit

Dynamic approach for the evaluation of the load carrying capacity and stability of flexible pavements with the Falling Weight Deflectometer 1059 S. Riedl

Behavior of asphalt pavements subjected to non-standard heavy vehicles 1071 P.E. Sebaaly & R.V. Siddharthan

Field behavior of foamed bitumen pavement material 1081 V. Papavasiliou & A. Loizos

Evaluation of cracking in overlays in Quebec: A case study 1091 A. Carter, D. Perraton, M. Meunier & M. Paradis

9. Recycling of bituminous pavement materials Utilization of aggregate production waste filler in cold recycling mix optimization 1101 J. Valentin & P. Mondschein

Rehabilitation of an Italian highway by Cold In-Place Recycling techniques 1113 F.A. Santagata, M. Bocci, A. Grilli & F. Cardone

Fracture energy evaluation of Cold In-Place Recycling mixtures 1123 S. Charmot & P. Romero

The use of marginal materials in road constructions: Proposal of an eco-compatible section 1131 M. Agostinacchio, M. Diomedi & S. Olita

Influence of active filler, curing time, and moisture content on the strength properties of emulsion and foamed bitumen stabilized mix 1143 S. Zulakmal, A.A. Nafisah, M. Mohd Yazip & H. Mat Zin

An experimental study on the recycling of powder extinguishers into bituminous mixtures 1151 F.G. Praticò, A. Moro & R. Ammendola

Key characteristics of materials stabilised with foamed bitumen 1161 D.C. Collings & K.J. Jenkins

In-plant asphalt cold recycling in rehabilitation of Babaei expressway project 1169 V. Ayan, A. Khavandi, A. Nikzad Gharehaghaji

10. Synthesis of international coordinated research initiatives RILEM interlaboratory test on interlayer bonding of asphalt pavements 1181 H. Piber, F. Canestrari, G. Ferrotti, X. Lu, A. Millien, M.N. Partl, C. Petit, A. Phelipot-Mardelé & C. Raab

RILEM interlaboratory test on pavement performance prediction and evaluation 1191 H. Piber, M.N. Partl & C. Raab

New tests for polymer-modified binders: Results of a Belgian round robin test 1201 J. De Visscher, S. Vansteenkiste, A. Leuridan, N. Piérard, E. Schelkens & Ph. du Bus de Warnaffe

Comparative test on indirect tension modulus test 1211 X. Carbonneau & Y. Le Gal

Binder fatigue properties and the results of the Rilem Round Robin Test 1221 D. Sybilski, M. Gajewski, W. Bańkowski, H. Soenen, E. Chailleux & G. Gauthier

11. Other topics Skid-resistance capability of two newly resurfaced runways in Israel 1235 M. Livneh

Chemical spill tolerance of hot mix asphalts: New research and gaps identification 1247 F.G. Praticò, R. Ammendola & A. Moro

Result of numerical analysis of efficacy geogrids on reinforced pavements’ vertical and horizontal deformations 1257 F. Saleh, Gh. Shafabakhsh & Ah. Hadad

Life cycle costs of typical asphalt pavement rehabilitation techniques in Colorado USA 1265 S. Shuler, C. Schmidt & J. Goldbaum

Performance oriented payment adjustment for flexible pavements 1269 P. Sivapatham & H.J. Beckedahl

Performance of hot mix asphalt surface under high tire pressure aircraft landing gear configuration at the FAA National Airport Pavement Test Facility 1279 N. Garg, T. Bennert & H. Brar

Quantification of the highway costs as a function of the road traffic and speed 1289 A.C. Valle de Souza & D. Cardoso de Lima

Author index 1299