# Advances and Trends in Engineering Sciences and Technologies II

DOI link for Advances and Trends in Engineering Sciences and Technologies II

Advances and Trends in Engineering Sciences and Technologies II book

# Advances and Trends in Engineering Sciences and Technologies II

DOI link for Advances and Trends in Engineering Sciences and Technologies II

Advances and Trends in Engineering Sciences and Technologies II book

#### Get Citation

These are the proceedings of the 2nd International Conference on Engineering Sciences and Technologies (ESaT 2016), held from 29th of June until the 1st of July 2016 in the scenic High Tatras Mountains, Tatranské Matliare, Slovak Republic. After the successful implementation and excellent feedback of the first international conference ESaT 2015, ESaT 2016 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice, Slovak Republic in collaboration with the University of Miskolc, Hungary. The conference focused on a wide spectrum of topics and subject areas in civil engineering sciences. The proceedings bringing new and original advances and trends in various fields of engineering sciences and technologies that accost a wide range of academics, scientists, researchers and professionals from universities and practice. The authors of the articles originate from different countries around the world guaranteeing the importance, topicality, quality and level of presented results.

## TABLE OF CONTENTS

part |2 pages

Part A: Computer simulation and modeling, Mechanics and dynamics, and Reliability and durability of structures

chapter |6 pages

#### Drift design approach for steel tall buildings according to Eurocode 3

chapter |6 pages

#### Weldability estimation of steels for hot work by the CCT diagrams

chapter |6 pages

#### Resistance of flat slabs by different applications of concentrated load

chapter |6 pages

#### Parameters of various timber-concrete composite connection systems

chapter |6 pages

#### Plastic resistance of IPE-section to interaction of bending internal forces My,Ed, Vz,Ed and torsion internal forces BEd, Tω,Ed and Tt,Ed

chapter |6 pages

#### Plastic resistance of H-section to interaction of bending moment My,Ed and bimoment BEd

chapter |6 pages

#### Experimental investigations of glass plates

chapter |6 pages

#### The reliability of slender concrete columns subjected to a loss of stability

chapter |6 pages

#### The cracking of prestressed girders influenced by decreased bond of tendons

chapter |6 pages

#### EUGLI imperfection method for columns with varying cross-sectional parameters – numerical solution

chapter |6 pages

#### Application of system identification on a steel footbridge across the Little Danube River

chapter |6 pages

#### Numerical solution for rotational stiffness of RHS tubular joints

chapter |6 pages

#### Experimental analysis of a composite steel-concrete slab

chapter |6 pages

#### Reduction of computational operations in the DOProC method

chapter |6 pages

#### Optimum design of a cellular shell structure of a belt-conveyor bridge

chapter |6 pages

#### Local buckling of rectangular steel tubes filled with concrete

chapter |6 pages

#### Experimental study of a four-point bending test on CLT deep beams

chapter |6 pages

#### Aerodynamic analysis and improvements of a solar car

chapter |6 pages

#### Evaluation of fibre-reinforced polymer perfobond rib shear connector resistance tests

chapter |6 pages

#### In plane buckling of frames with laced built-up members

chapter |6 pages

#### Contact model of the fibre-matrix debonding coupling the interface damage and friction

chapter |6 pages

#### Strain of elements reinforced by GFRP at elevated temperatures

chapter |6 pages

#### An investigation of glued connections with acrylate adhesives

chapter |8 pages

#### The maximum punching shear resistance of flat slabs

chapter |6 pages

#### Verification of experiment of vacuum loading on slab

chapter |6 pages

#### Constitutive equations for selected rheological models in linear viscoelasticity

chapter |6 pages

#### Analysis of secondary effects due to prestressing at continuous concrete beams at ultimate limit state

chapter |6 pages

#### Adaptive tensegrity module: Description of an adaptation process

chapter |6 pages

#### Dynamic identification of composite beam pedestrian bridges

chapter |6 pages

#### Evaluation’s methods of the seismic stability of buildings and structures in the Gaza Strip

chapter |6 pages

#### Searching for optimally corrected shape of a chosen tensegrity system

chapter |6 pages

#### Experimental investigation of the effects of tensile force on the characteristics of turbulence downstream of a novel active grid

chapter |6 pages

#### Crack initiation in concrete specimens based on alkali-activated binders

chapter |6 pages

#### Modeling of the airflow in the small-scale model of ventilated air channel

chapter |6 pages

#### Reduction of ceiling vibrations by stiffness modification of a load-bearing structure

chapter |6 pages

#### The acoustic non-destructive methods and their application to stress situation construction materials

chapter |6 pages

#### University BIM distance learning course for secondary school students

chapter |6 pages

#### The numerical analysis of deteriorated steel elements reinforced with CFRP

chapter |6 pages

#### Basic features of aggregate-matrix-interface fracture of concrete: Pilot modelling

part |2 pages

Part B: Buildings and structures, Construction technology and management, Environmental engineering, Heating, ventilation and air condition, Materials and technologies, and Water supply and drainage

chapter |6 pages

#### Diagnostics to determine the cause of occurrence of cracks on ETICS

chapter |6 pages

#### Verification of the technology choice repairs ETICS

chapter |6 pages

#### Assessment of ground water infiltration to the basement garage spaces

chapter |6 pages

#### Monitoring the effectiveness of sorbent materials for removing selected metals from water

chapter |6 pages

#### Technology of waterproofing membranes based on mPVC for flat roof

chapter |6 pages

#### Importance of aerodynamic quantification in the determination of heat losses in buildings

chapter |6 pages

#### New methods of optimizing building maintenance

chapter |6 pages

#### The inclusion of a water feature to the interior and its impact on internal microclimate

chapter |6 pages

#### A human induced landslide in the centre of a town

chapter |6 pages

#### Implementing effective Supply Chain Management (SCM) strategies

chapter |6 pages

#### Detecting fibers in the cross sections of steel fiber-reinforced concrete

chapter |6 pages

#### Waste water treatment in North Moravia and Silesia, from the past to the present

chapter |6 pages

#### Model house with modifiable disposition

chapter |6 pages

#### Optimizing method of building machine group selection implemented into soil processes with software support

chapter |6 pages

#### Spatio-temporal analysis of soil properties for the eastern border of the European Union

chapter |6 pages

#### Use of the program SWMM to simulate rainfall runoff from urbanized areas

chapter |6 pages

#### Causes and impacts of dropping water consumption on a wastewater treatment plant

chapter |8 pages

#### Effectiveness of costs incurred for labor protection

chapter |8 pages

#### Fiber optic temperature measurement of mass concrete at an early age – case study

chapter |6 pages

#### The effect of distance and noise barrier at the dispersion of pollutants in the vicinity of roads

chapter |6 pages

#### The effective use of renewable energy in the design of construction equipment

chapter |6 pages

#### Properties of autoclaved aerated concretes produced with different types of fibers

chapter |6 pages

#### Selected problems of temperature conditions in the interior of large area of single store halls

chapter |6 pages

#### The efficiency of green roofs to mitigate urban heat island effect in Rio de Janeiro

chapter |6 pages

#### Thermal mass of building construction versus operative temperature

chapter |6 pages

#### Effect of admixtures on probabilistic indexes of concrete quality with consideration of environmental impact

chapter |6 pages

#### Knowledge database of modern methods of construction

chapter |6 pages

#### Impact of construction activities on GDP in the Czech Republic and its regions

chapter |6 pages

#### Microorganisms growing on insulated façades

chapter |6 pages

#### Changes in housing demands and their influence on overall user comfort for a block of flats in the Czech Republic

chapter |6 pages

#### Contactless method of measuring displacement in the study of brick prisms

chapter |6 pages

#### Evaluating adhesion of weatherproofing sealant joints: Price vs. quality

chapter |6 pages

#### Vertical distribution of compact air jets in the hall of an ice arena

chapter |6 pages

#### Theoretical and methodological principles of impact assessment of strategic documents on environment and health

chapter |6 pages

#### Modelling of integrated impact assessments of development strategies

chapter |6 pages

#### Comparison of wind pressure on high-rise building obtained by numerical analysis and experimental measurements

chapter |6 pages

#### Semi-automated budgeting of structures included in modern methods of construction based on 3D model

chapter |6 pages

#### Research summary: Analysis of selected adhesive systems intended for façade bonding

chapter |6 pages

#### The impact of green roofs on thermal protection and the energy efficiency of buildings

chapter |8 pages

#### Thermal insulation systems (ETICS) – important layers of the system and testing the implementation of non-standard temperatures

chapter |6 pages

#### The influence of form of public space around residential complexes on quality of living

chapter |6 pages

#### Cultural influences conditioning the development of funeral architecture, its current status and its future direction

chapter |6 pages

#### Vegetation of the green roof affecting temperature under the foliage

chapter |6 pages

#### Impact of environmental aspect and safety at work in designing of mechanized building processes

chapter |6 pages

#### Implementation of risk management theory for the development of lean thinking in a construction company

chapter |8 pages

#### Definition of benchmarks for the assessment of the economic performance of buildings

chapter |6 pages

#### Baseline emission inventory – a methodology for municipalities

chapter |6 pages

#### Turning grey into green – integration of living walls in grey water system

chapter |6 pages

#### Evaluation of test methods for testing of sealants

chapter |6 pages

#### Thermal assessment of chosen foundation details of energy-efficient family houses constructed in Kosice, Slovakia

chapter |6 pages

#### Heat exchange peculiarities in ventilated facades air cavities due to different wind speed

chapter |6 pages

#### Impact of structural and technological optimisation on quality and durability of concrete car garages

chapter |6 pages

#### Software-based support to decision-making process regarding the selection of concrete suppliers

chapter |6 pages

#### Safety versus cost of linear structures in public procurement

chapter |6 pages

#### The problem of sufficient/insufficient airflow in roofs of residential buildings

chapter |6 pages

#### Traffic calming as a means of improvement of the urban environment

chapter |6 pages

#### Possibilities of the utilization of natural fibers for insulation materials production

chapter |6 pages

#### Technical conditions of barrier-free housing and needs of people with physical limitations

chapter |6 pages

#### Analysis of rainfall trends in Syria

chapter |6 pages

#### Numerical analysis of cylindrical wedge-wire screen operation

part |2 pages

Part C: Geodesy, surveying and mapping, and Roads, bridges and geotechnics