ABSTRACT
Bollards and access restriction Supply and install 10 nr cast iron Doric bollards 920mm high above ground × 170mm dia. bedded in concrete base 400mm dia. × 400mm deep 10 nr 1500.00
Benches and seating In grassed area excavate for base 2500× 1575mm and lay 100mm hardcore, 100mm concrete, brick pavers in stack bond bedded in 25mm cement: lime: sand mortar; supply and fix where shown on drawing proprietary seat, hardwood slats on black powder coated steel frame, bolted down with 4 nr 24×90mm recessed hex-head stainless steel anchor bolts set into concrete set 1125.00
Cycle stand Supply and fix cycle stand 1250m×550mm of 60.3mm black powder coated hollow steel sections, one-piece with rounded top corners; set 250mm into paving each 420.00
8.5.2 ORNAMENTAL WATER FEATURES
FAIRWATER LTD
Excavate for small pond or lake maximum depth 1.00m; remove arisings off site; grade and trim to shape; lay 75mm sharp sand; line with 0.75mm butyl liner 75mm sharp sand and geofabric; cover over with sifted topsoil; anchor liner to anchor trench; install balancing tank and automatic top-up system Pond or lake of organic shape
100m2; perimeter 50m each 5700.00 250m2; perimeter 90m each 8800.00 500m2; perimeter 130m each 21000.00 1000m2; perimeter 175m each 42000.00
Excavate for lake average depth 1.0m, allow for bringing to specified levels; reserve topsoil; remove spoil to approved dump on site; remove all stones and debris over 75mm; lay polythene sheet including welding all joints and seams by specialist; screen and replace topsoil 200mm thick Prices are for lakes of regular shape
500micron sheet 1000m 16000.00 1000micron sheet 1000m 20000.00
Extra for removing spoil to tip m³ 23.00 Extra for 25mm sand blinding to lake bed 100m² 115.00 Extra for screening topsoil m² 1.20 Extra for spreading imported topsoil 100m² 760.00
Plant aquatic plants in lake topsoil Aponogeton distachyum PC £312.00/100 100 79.00 Acorus calamus PC £198.00/100 100 79.00 Butomus umbellatus PC £198.00/100 100 79.00 Typha latifolia PC £198.00/100 100 79.00 Nymphaea PC £816.00/100 100 79.00
£ Excluding site overheads and profit
8.5.2 ORNAMENTAL WATER FEATURES – cont
Formal water features
Excavate and construct water feature of regular shape; lay 100mm hardcore base and 150mm concrete 1:2:4 site mixed; line base and vertical face with butyl liner 0.75micron and construct vertical sides of reinforced blockwork; rendering two coats; anchor the liner behind blockwork; install pumps balancing tanks and all connections to mains supply 1.00 ×1.00×1.00deep nr 2475.00 2.00 ×1.00×1.00deep nr 3100.00
Excavate and construct water feature of circular shape; lay 100mm hardcore base and 150mm concrete 1:2:4 site mixed; line base and vertical face with butyl liner 0.75micron and construct vertical sides of reinforced blockwork; rendering two coats; anchor the liner behind blockwork; install pumps balancing tanks and all connections to mains supply Surround water body with ornamental fountain surround
Architectural Heritage; Great Westwood; 6.00m dia. 350 high nr 12500.00 Haddonstone; circular pool surround; internal dia. 1780mm; kerb features continuous moulding enriched with ovolvo and palmette designs; inclusive of plinth and integral conch shell vases flanked by dolphins nr 6200.00
8.5.2 ORNAMENTAL BUILDINGS
Excavate and dispose excavated material; lay concrete base 150 thick ; erect garden building Pavillion; Cast stone; Haddonstone; floor of yorkstone diamond sawn 6 sides.
