Mine Planning and Equipment Selection 1997 | R. Farana, V. Kebo, L. Sm

Book

No Image Available

ABSTRACT

Presenting current and emerging technologies in the field of mine planning and equipment, this volume also covers control and automation for surface and underground mining. A wide range of papers from professionals in Europe, South America, Africa and Australia are featured.

TABLE OF CONTENTS

part 1|117 pages

Mineral resources and economics in mining

chapter |6 pages

The socio-economic impact of small scale mining in Ghana

chapter |6 pages

Economic assessment of works of open-pit’s mining-transport systems

chapter |4 pages

An application of geostructural and seismic investigations in a granite quarry in Sardinia, Italy

chapter |4 pages

Criteria of effectiveness when choosing the methods of repairing machines and equipment

chapter |5 pages

Contribution to the problems of mining enterprise liquidity ratios

chapter |9 pages

Dynamic simulation of multi-phase mining venture risks resolution

chapter |8 pages

Rigorous functional model for mine production equipment maintenance and reliability

chapter |6 pages

Mining of Cuban clay deposits

chapter |7 pages

New practical evaluation on mining rock slope stability

chapter |8 pages

Indian iron ore scenario — Prospects for 21st century

chapter |7 pages

The economic management of uranium ore mining of Rozna deposit

chapter |4 pages

Technological characteristics of the serpentinites of the Cana Brava Mine, Go, Brazil

chapter |6 pages

Mineral raw materials — The past, the present and the future

chapter |7 pages

System selection for coal combustion by-product transportation

chapter |6 pages

Reflections on prospective raw materials and materials with regard to the Czech Republic

chapter |6 pages

Geostatistical appraisal of the Upper Precambrian gold deposits of the Cachoeiras de Minas region, Paraíba, Brazil

chapter |6 pages

Economic assessment of strategic prospect of extraction

chapter |5 pages

Introduction coal mining industry in China

part 2|150 pages

Technologies of deposit exploitation

chapter |3 pages

Increase of fullness of worked-out space filling when thick flat deposits mining

chapter |8 pages

Narrow vein mining — A challenge to the operator

chapter |7 pages

Small-scale vein-gold exploitation in Gwynfynydd mine, Wales, Uk

chapter |8 pages

Czech mining and university education at the turn of the centuries

chapter |5 pages

Reclamation of dimension stone deposits

chapter |3 pages

Design method for roadway support in deep mines

chapter |2 pages

New trends of scientific and technical solutions of roadway maintenance in soft rocks

chapter |6 pages

Rib pillar stability analysis associated with change of the mining method in an underground coal mine — A case study

chapter |2 pages

The underground coal gasification is the technology which answers to conditions of sustainable development of coal region

chapter |6 pages

Improvement of quartzite natural slabs extraction in the Barge basin quarries, Italy

chapter |5 pages

Development roadway practice in Japanese underground coal mines

chapter |2 pages

The mining of low coal seams at the Paskov Mine

chapter |4 pages

Ventilation requirements after dust criteria in fully mechanized longwall districts in Valea Jiului coal basin, Romania

chapter |6 pages

Conversion of waste dump into a recreation and leisure park

chapter |4 pages

Developments of spiral separation technology for retreatment of fines from coal dumps

chapter |3 pages

The new mining technology using pneumatic constructions

chapter |3 pages

Technology of ore pillars extraction from filling massif

chapter |5 pages

Synthesis of the graph-analytical and imitation methods of the quarry’s load-streams modeling

chapter |7 pages

Application of computer art in the sphere of mining designing at Most Coal Company J. S.C.

chapter |3 pages

Slope stability of a coal mine — A case study

chapter |3 pages

Dealing with tectonic faults in mining faces with mechanized reinforcement

chapter |5 pages

Tensometric measuring rockbolt

chapter |5 pages

Simulation of work of complex for flow mining of hard rocks

chapter |4 pages

Mining thick deposits in coal seams in the Lazy Mine

chapter |6 pages

Study on the fully mechanized longwall face working condition in China colliery

chapter |6 pages

The roof bearing capacity and strata control

chapter |6 pages

Design capacity of belt and bunkers by computer simulators in Barakupuria Mine of Bangladesh

chapter |3 pages

Winning operations influence on load on horizontal mine workings

chapter |4 pages

Mining method decision support system in gently inclined coal seams

part 3|102 pages

Mining geomechanics

chapter |5 pages

Slendemess ratios in dependence of modulus of deformation and uniaxial compressive strength

chapter |8 pages

Optimum cutting plan in tunnel excavation with waterjet slotter

chapter |7 pages

Use of wavelet transform for processing of mining induced seismic events

chapter |4 pages

Strata control at the face with fully mechanized sub-level caving

chapter |3 pages

The evaluation of reused effects of roadways retained along gob edges

chapter |8 pages

Rock and gas outbursts

chapter |5 pages

Solving the problems of outbursts of coal and gases in the Paskov Mine, partial enterprise, Staříč plant

chapter |4 pages

The determination of rocks’ mechanical properties with the use of ultrasounds

chapter |5 pages

Analysis of seismic events induced by blasting operations in the opencast mine

chapter |7 pages

Instrumentation for measurement of acoustic emission during laboratory tests

chapter |5 pages

Acoustic emission from different types of carboniferous rocks during uniaxial loading

chapter |8 pages

New achievements in geomechanics and their importance for mining theory and practice

chapter |6 pages

Analysis of a roof failure in a bauxite mine

chapter |2 pages

New aspects of prediction ground movement in coal mines

chapter |6 pages

Rock characterization and stress analysis at B altar Mine, Brazil

chapter |7 pages

Stress calculations around general shaped mine openings using conformal mapping

chapter |2 pages

Automated construction of stractural-and-strength maps of stowed workings

part 4|144 pages

Modem trends of mining technologies and mechanization

chapter |8 pages

New trends in the longwall mechanization of thin seams in Poland

chapter |5 pages

Development of a new VÍTkovice spreader

chapter |6 pages

Full scale and small scale cutting tests for equipment selection in a Celestite Mine

chapter |6 pages

The performance measurement results of stone cutting machines and their relations with some material properties

chapter |5 pages

Testing of powered support

chapter |2 pages

The increasing of the mining machines and equipment operation period

chapter |5 pages

Application of electronic control systems in heavy machines for open pit mining

chapter |5 pages

Practical way for plant equipment selection on stone quarries

chapter |6 pages

Problems related to transportation of mineral materials through living environment

chapter |5 pages

Fatigue-load testing of conveyor belts

chapter |4 pages

Prospects of using of electrical loader of high-speed digging

chapter |4 pages

Equipment for stray currents restriction in mines

chapter |5 pages

Calculation of slurry transportation by Pro-Hitra software

chapter |6 pages

Design of mining robotics systems

chapter |4 pages

New progress of mining mechanization in China

chapter |6 pages

Temperature influence on rheological properties of conveyor belts

chapter |7 pages

Planning for faster drivage rate with roadheaders in Indian longwall mines: A field investigation

chapter |7 pages

Benefits of studies on Lhd reliability and availability for mines

chapter |7 pages

Magnetic defectoscopy of steel ropes

chapter |4 pages

New electric-power supply system with the inductive power receipt at the electric locomotives for coal mines

chapter |5 pages

Parameters optimization methods of the power pack with advanced hydro-static drive for rotary blasthole drill

chapter |4 pages

Study on the support technology of roadway driven along next goaf for fully mechanized caving coalface

chapter |4 pages

Dynamic status of a bevel gear as a function of lubrication conditions

chapter |8 pages

Developments in haul road design technology

chapter |4 pages

A study on haulage technology and equipment in large open pit mines in China

part 5|69 pages

Technology of driving, drilling and blasting

chapter |4 pages

Assessing rock Assuring in the blasting process

chapter |5 pages

Design and primary investigations of heads with replaceable bits for rotary drilling in rocks

chapter |6 pages

Damages to the roadway tunnels in the coal mining area of Hebi, P.R.China: Proposals to minimise damages and numerical analysis

chapter |8 pages

Techniques of drilling rescue holes with simultaneous casing from underground workings

chapter |3 pages

Procedure of calculating bench blasting parameters applied in Polish quarries

chapter |7 pages

Impact of inherent fractures on fragmentation of blasted coal

chapter |5 pages

Use of a method of the equivalent circuits at modeling of technical objects

chapter |6 pages

The prediction and identification of the faults and changes of the properties of rockmass based on the analysis of the data logged in real time during boring

chapter |6 pages

The new method of calculation of the granulometre composition of exploded rocks

chapter |4 pages

Technological and ergonomic aspects of selected muds application to the drilling of rescue holes in underground dog headings

chapter |9 pages

The total open stope design approach (Part 1)

part 6|76 pages

Monitoring and management of mining operations and technologies

chapter |8 pages

Methane-fire hazard monitoring and ventilation control system

chapter |7 pages

Mathematical modelling and computer simulation of conveyor belts mechanical parts cooperation for supporting diagnostic inference

chapter |4 pages

Management of effective utilisation of mined coal by computer simulation

chapter |7 pages

Information and control system of ČSM Coal Mine preparation plant

chapter |5 pages

Computer simulation of methane emission in long wall faces

chapter |5 pages

The methods of monitoring and management of mining operations at open-pits via modelling

chapter |5 pages

System of procurement and elaboration of basic geological and topographical data files for mining projecting, control, monitoring and superivsion of Most Coal Company, JSC coal mines operations

chapter |4 pages

Study of dynamic characteristic and balance adjustment of multi-cable friction hoist steel cable tension

chapter |4 pages

Control system for the operational parameters of the multirope hoisting installations

chapter |6 pages

Dynamic simulation on mine-wide transport for designing and dispatching

chapter |6 pages

Detailed control technology for surface mines by process stations

chapter |3 pages

Solution of problems, emerging with the transition to thin seams mining on underground mines

chapter |4 pages

Smart sensors with optical fibre transmitters for pressure measurement

part 7|69 pages

Information and expert systems in mining

chapter |4 pages

Intellectual CAD/CAE of mining machines production

chapter |5 pages

SIPRO program for prediction of ecological subsystems behaviour

chapter |2 pages

Real time simulation tools for knowledge based operative-dispatch system

chapter |5 pages

Practical computer modelling and planning of mineral reserves

chapter |4 pages

System for storing and presentation of information about the underground mine

chapter |6 pages

Modelling of mine ventilation network dynamical characteristics

chapter |7 pages

Mine ventilation system planning esing genetic algorithms

chapter |5 pages

Representing model-based knowledge in mine planning

chapter |3 pages

The system of landscape formation after mining activities have been completed

chapter |4 pages

A new parameter used in hazardous area risk analysis

chapter |4 pages

A Q-GERI network model for the optimization of mining process of the fully-mechanized face

chapter |4 pages

The development of an expert system for monitoring and diagnosing underground electrical equipment malfunctions and breakdowns

chapter |5 pages

Genetic algorithm for the optimization of planning in mines

chapter |3 pages

Based on artificial neural network a forecasting model for rock deformation around roadway (I) — Clustering analysis model for stability of rock around roadway

part 8|22 pages

Mine surveying, geology and engineering geodesy

chapter |7 pages

Single-image photogrammetric method of vertical working: Present situation and future options

chapter |2 pages

Peculiarities of earth surface displacements at underground mining with complex hydrogeological conditions

chapter |5 pages

Experience made with the GPS undermining impact measurement method

chapter |4 pages

Analysis of mining induced strata failure and water flow using the distinct element method

part 9|67 pages

Mineral processing

chapter |3 pages

Modern methods and means of controlling processes in coal processing plants

chapter |4 pages

Oil agglomeration in new combined technologies

chapter |4 pages

Artificial sand production using hydrocyclone

chapter |4 pages

Spiral separation: The state-of-the-art in coal slimes preparation

chapter |3 pages

Direct-flow lamellar classification of coal slimes

chapter |5 pages

The wettability of minerals and coal by magnetizable fluids

chapter |4 pages

Flotation rates and particle size distribution in the copper ore flotation plant ‘V.Krivelj’

chapter |6 pages

Processing of uraniem ore on the chemical treatment plant GEAM Dolni Rozinka in the conditions of completely closed technological waters cycle with minimalising of environmental impact

chapter |2 pages

Iron ore production process in variable magnetic field

chapter |6 pages

Methodics of determination of brown coal preparability by the analysis of microsamples from segments of drilling cores

chapter |2 pages

Contributions regarding a stochastic approach of a floatation technological system

chapter |3 pages

Improving the technology of disthene concentrate obtained at the Volnogorsk State Mining Metallurgical Works

chapter |5 pages

Crashing process in stone quarry plant

chapter |4 pages

Using discrete simulation for a mine mill

chapter |5 pages

New generation coefficients for the flotation and reflotation of OKR’s coal sludge

part 10|177 pages

Mining and the environment

chapter |2 pages

The prospects of reducing environmental pollution at the collieries belonging to Petroşani Autonomous Bituminous Coal Administration

chapter |5 pages

Environmental impact evaluation of gold mines in the northwest of Argentine

chapter |3 pages

Mathematical model setup of the dependence between the hydrodynamic parameters of hidrogravimetric concentration of ash processing in case of thermoelectric plant ash recycling

chapter |4 pages

Monitoring analysis of major and trace elements in hard coal waste by XRF and ICP methods

chapter |4 pages

Biotechnology for heavy metals elimination

chapter |3 pages

Feasibility consideration for underground disposal of power plant wastes

chapter |8 pages

Mining and evaluation of stressed soils: Stochastic aspects of empirical modelling approach

chapter |4 pages

Possibility of complex solving problems of energetical wastes — Fly ashes

chapter |5 pages

Underground waste dumping

chapter |8 pages

Protection of groundwater resources quality and quantity in mining areas

chapter |5 pages

Conditions of Antonín seam exploitation in the open pit Druzba near Sokolov with regard to the protection of thermal and mineral water resources in Karlovy Vary

chapter |5 pages

Mines in urban areas and its conservation problems

chapter |4 pages

Project preparation of mining begins at liquidation of mining activity

chapter |7 pages

Backfill operation planning utilising power plant ashes to minimize mine damages

chapter |5 pages

Noise associated with mining excavation equipment

chapter |4 pages

Preserving of the geoenvironment by filling of underground spaces with hydraulically transported waste slurries

chapter |4 pages

Environmental self-diagnosis handbook for metal and non-metal mines

chapter |2 pages

The Darkov and Louky reclamation projects overview

chapter |2 pages

The Karviná Township reclamation concept

chapter |6 pages

Rehabilitation of the quarry of Akra Tourla Salamina, Greece: A case study on the evaluation of reclamation alternatives

chapter |4 pages

Some applications of GIS ARC/INFO in the evaluation of urban radon risk

chapter |7 pages

Anthropogenic soils on spoil rock banks in North Bohemian Coal Basin, Czech Republic

chapter |8 pages

Ecological risks in polymetallic mining district of Zlaté Hory, Czech Republic

chapter |6 pages

Abandoning of mining activities — Impact on groundwater and surface water systems

chapter |5 pages

Management of ‘mines-preparatory mills’ coal flows with regard to the region’s environment conditions

chapter |6 pages

Environmental protection in the production of gravel and sand in Croatia

chapter |5 pages

Polluting sources and their impact on the environment in the Jiu Valley coal field

chapter |4 pages

Economic appraisal of the reclamation of sand deposits located at the Northern Area of João Pessoa City, Brazil

chapter |3 pages

Mining waste and land reclamation in Ostrava-Karviná Coal District, Czech Republic

chapter |4 pages

Evaluation of dust prevention in deep mines in the light of modem measuring methods

chapter |6 pages

Watered depressions as ecological phenomena in regions affected by mining activities

chapter |5 pages

Rehabilitation of residual pits in post-mining area: A goal of Czech brown coal opencast mining industry

chapter |7 pages

Aspects upon environment of the capitalising of heavy minerals from titano-zirconifers sands

part 11|14 pages

Supplement

chapter |12 pages

Economical and technological aspects of Bucket Wheel Excavator and Crusher/Conveyor systems