Breadcrumbs Section. Click here to navigate to respective pages.
Book

Book
Advances and Trends in Engineering Sciences and Technologies II
DOI link for Advances and Trends in Engineering Sciences and Technologies II
Advances and Trends in Engineering Sciences and Technologies II book
Advances and Trends in Engineering Sciences and Technologies II
DOI link for Advances and Trends in Engineering Sciences and Technologies II
Advances and Trends in Engineering Sciences and Technologies II book
Get Citation
ABSTRACT
These are the proceedings of the 2nd International Conference on Engineering Sciences and Technologies (ESaT 2016), held from 29th of June until the 1st of July 2016 in the scenic High Tatras Mountains, Tatranské Matliare, Slovak Republic. After the successful implementation and excellent feedback of the first international conference ESaT 2015, ESaT 2016 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice, Slovak Republic in collaboration with the University of Miskolc, Hungary. The conference focused on a wide spectrum of topics and subject areas in civil engineering sciences. The proceedings bringing new and original advances and trends in various fields of engineering sciences and technologies that accost a wide range of academics, scientists, researchers and professionals from universities and practice. The authors of the articles originate from different countries around the world guaranteeing the importance, topicality, quality and level of presented results.
TABLE OF CONTENTS
part |2 pages
Part A: Computer simulation and modeling, Mechanics and dynamics, and Reliability and durability of structures
chapter |6 pages
Drift design approach for steel tall buildings according to Eurocode 3
chapter |6 pages
Weldability estimation of steels for hot work by the CCT diagrams
chapter |6 pages
Resistance of flat slabs by different applications of concentrated load
chapter |6 pages
Parameters of various timber-concrete composite connection systems
chapter |6 pages
Plastic resistance of IPE-section to interaction of bending internal forces My,Ed, Vz,Ed and torsion internal forces BEd, Tω,Ed and Tt,Ed
chapter |6 pages
Plastic resistance of H-section to interaction of bending moment My,Ed and bimoment BEd
chapter |6 pages
Experimental investigations of glass plates
chapter |6 pages
The reliability of slender concrete columns subjected to a loss of stability
chapter |6 pages
The cracking of prestressed girders influenced by decreased bond of tendons
chapter |6 pages
EUGLI imperfection method for columns with varying cross-sectional parameters – numerical solution
chapter |6 pages
Application of system identification on a steel footbridge across the Little Danube River
chapter |6 pages
Numerical solution for rotational stiffness of RHS tubular joints
chapter |6 pages
Experimental analysis of a composite steel-concrete slab
chapter |6 pages
Reduction of computational operations in the DOProC method
chapter |6 pages
Optimum design of a cellular shell structure of a belt-conveyor bridge
chapter |6 pages
Local buckling of rectangular steel tubes filled with concrete
chapter |6 pages
Experimental study of a four-point bending test on CLT deep beams
chapter |6 pages
Aerodynamic analysis and improvements of a solar car
chapter |6 pages
Evaluation of fibre-reinforced polymer perfobond rib shear connector resistance tests
chapter |6 pages
In plane buckling of frames with laced built-up members
chapter |6 pages
Contact model of the fibre-matrix debonding coupling the interface damage and friction
chapter |6 pages
Strain of elements reinforced by GFRP at elevated temperatures
chapter |6 pages
An investigation of glued connections with acrylate adhesives
chapter |8 pages
The maximum punching shear resistance of flat slabs
chapter |6 pages
Verification of experiment of vacuum loading on slab
chapter |6 pages
Constitutive equations for selected rheological models in linear viscoelasticity
chapter |6 pages
Analysis of secondary effects due to prestressing at continuous concrete beams at ultimate limit state
chapter |6 pages
Adaptive tensegrity module: Description of an adaptation process
chapter |6 pages
Dynamic identification of composite beam pedestrian bridges
chapter |6 pages
Evaluation’s methods of the seismic stability of buildings and structures in the Gaza Strip
chapter |6 pages
Searching for optimally corrected shape of a chosen tensegrity system
chapter |6 pages
Experimental investigation of the effects of tensile force on the characteristics of turbulence downstream of a novel active grid
chapter |6 pages
Crack initiation in concrete specimens based on alkali-activated binders
chapter |6 pages
Modeling of the airflow in the small-scale model of ventilated air channel
chapter |6 pages
Reduction of ceiling vibrations by stiffness modification of a load-bearing structure
chapter |6 pages
The acoustic non-destructive methods and their application to stress situation construction materials
chapter |6 pages
University BIM distance learning course for secondary school students
chapter |6 pages
The numerical analysis of deteriorated steel elements reinforced with CFRP
chapter |6 pages
Basic features of aggregate-matrix-interface fracture of concrete: Pilot modelling
part |2 pages
Part B: Buildings and structures, Construction technology and management, Environmental engineering, Heating, ventilation and air condition, Materials and technologies, and Water supply and drainage
chapter |6 pages
Diagnostics to determine the cause of occurrence of cracks on ETICS
chapter |6 pages
Verification of the technology choice repairs ETICS
chapter |6 pages
Assessment of ground water infiltration to the basement garage spaces
chapter |6 pages
Monitoring the effectiveness of sorbent materials for removing selected metals from water
chapter |6 pages
Technology of waterproofing membranes based on mPVC for flat roof
chapter |6 pages
Importance of aerodynamic quantification in the determination of heat losses in buildings
chapter |6 pages
New methods of optimizing building maintenance
chapter |6 pages
The inclusion of a water feature to the interior and its impact on internal microclimate
chapter |6 pages
A human induced landslide in the centre of a town
chapter |6 pages
Implementing effective Supply Chain Management (SCM) strategies
chapter |6 pages
Detecting fibers in the cross sections of steel fiber-reinforced concrete
chapter |6 pages
Waste water treatment in North Moravia and Silesia, from the past to the present
chapter |6 pages
Model house with modifiable disposition
chapter |6 pages
Optimizing method of building machine group selection implemented into soil processes with software support
chapter |6 pages
Spatio-temporal analysis of soil properties for the eastern border of the European Union
chapter |6 pages
Use of the program SWMM to simulate rainfall runoff from urbanized areas
chapter |6 pages
Causes and impacts of dropping water consumption on a wastewater treatment plant
chapter |8 pages
Effectiveness of costs incurred for labor protection
chapter |8 pages
Fiber optic temperature measurement of mass concrete at an early age – case study
chapter |6 pages
The effect of distance and noise barrier at the dispersion of pollutants in the vicinity of roads
chapter |6 pages
The effective use of renewable energy in the design of construction equipment
chapter |6 pages
Properties of autoclaved aerated concretes produced with different types of fibers
chapter |6 pages
Selected problems of temperature conditions in the interior of large area of single store halls
chapter |6 pages
The efficiency of green roofs to mitigate urban heat island effect in Rio de Janeiro
chapter |6 pages
Thermal mass of building construction versus operative temperature
chapter |6 pages
Effect of admixtures on probabilistic indexes of concrete quality with consideration of environmental impact
chapter |6 pages
Knowledge database of modern methods of construction
chapter |6 pages
Impact of construction activities on GDP in the Czech Republic and its regions
chapter |6 pages
Microorganisms growing on insulated façades
chapter |6 pages
Changes in housing demands and their influence on overall user comfort for a block of flats in the Czech Republic
chapter |6 pages
Contactless method of measuring displacement in the study of brick prisms
chapter |6 pages
Evaluating adhesion of weatherproofing sealant joints: Price vs. quality
chapter |6 pages
Vertical distribution of compact air jets in the hall of an ice arena
chapter |6 pages
Theoretical and methodological principles of impact assessment of strategic documents on environment and health
chapter |6 pages
Modelling of integrated impact assessments of development strategies
chapter |6 pages
Comparison of wind pressure on high-rise building obtained by numerical analysis and experimental measurements
chapter |6 pages
Semi-automated budgeting of structures included in modern methods of construction based on 3D model
chapter |6 pages
Research summary: Analysis of selected adhesive systems intended for façade bonding
chapter |6 pages
The impact of green roofs on thermal protection and the energy efficiency of buildings
chapter |8 pages
Thermal insulation systems (ETICS) – important layers of the system and testing the implementation of non-standard temperatures
chapter |6 pages
The influence of form of public space around residential complexes on quality of living
chapter |6 pages
Cultural influences conditioning the development of funeral architecture, its current status and its future direction
chapter |6 pages
Vegetation of the green roof affecting temperature under the foliage
chapter |6 pages
Impact of environmental aspect and safety at work in designing of mechanized building processes
chapter |6 pages
Implementation of risk management theory for the development of lean thinking in a construction company
chapter |8 pages
Definition of benchmarks for the assessment of the economic performance of buildings
chapter |6 pages
Baseline emission inventory – a methodology for municipalities
chapter |6 pages
Turning grey into green – integration of living walls in grey water system
chapter |6 pages
Evaluation of test methods for testing of sealants
chapter |6 pages
Thermal assessment of chosen foundation details of energy-efficient family houses constructed in Kosice, Slovakia
chapter |6 pages
Heat exchange peculiarities in ventilated facades air cavities due to different wind speed
chapter |6 pages
Impact of structural and technological optimisation on quality and durability of concrete car garages
chapter |6 pages
Software-based support to decision-making process regarding the selection of concrete suppliers
chapter |6 pages
Safety versus cost of linear structures in public procurement
chapter |6 pages
The problem of sufficient/insufficient airflow in roofs of residential buildings
chapter |6 pages
Traffic calming as a means of improvement of the urban environment
chapter |6 pages
Possibilities of the utilization of natural fibers for insulation materials production
chapter |6 pages
Technical conditions of barrier-free housing and needs of people with physical limitations
chapter |6 pages
Analysis of rainfall trends in Syria
chapter |6 pages
Numerical analysis of cylindrical wedge-wire screen operation
part |2 pages
Part C: Geodesy, surveying and mapping, and Roads, bridges and geotechnics