Breadcrumbs Section. Click here to navigate to respective pages.
Book

Book
Asphalt Pavements
DOI link for Asphalt Pavements
Asphalt Pavements book
Asphalt Pavements
DOI link for Asphalt Pavements
Asphalt Pavements book
Get Citation
ABSTRACT
Asphalt Pavements contains the proceedings of the International Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June 2014), and discusses recent advances in theory and practice in asphalt materials and pavements. The contributions cover a wide range of topics:- Environmental protection and socio-economic impacts- Additives and mo
TABLE OF CONTENTS
part |2 pages
Plenary papers
part |2 pages
Plenary session on materials
chapter |8 pages
Insights into binder chemistry, microstructure, properties relationships—usage in the real world
part |2 pages
Plenary session on preservation
chapter |8 pages
Why preservation-definitions, treatment types, benefits, and challenges
part |2 pages
Podium papers
chapter |8 pages
Urban heat island effect: Comparing thermal and radiation effects of asphalt and concrete pavements on adjacent buildings using CFD methods
chapter |8 pages
Worker exposure to ultrafine particles in asphalt laboratory
chapter |10 pages
Method for calculating warm mix energy saving based on stack gas measurements
part |2 pages
Additives and modifiers for asphalt concrete—I
chapter |10 pages
Surface energy measurements and wettability investigation of different minerals and bitumen for cold asphalts
chapter |8 pages
Damage in asphalt concrete during the dynamic complex modulus and flow number tests
chapter |10 pages
The Universal Simple Aging Test (USAT): Simulating short- and long term hot and warm mix oxidative aging in the laboratory
part |2 pages
Maintenance and rehabilitation—I
chapter |14 pages
Performance study of fog or rejuvenating seals on gap and open graded surfaces for Caltrans
chapter |10 pages
Evaluation of early aggregate retention performance of chip seals with Polymer-Modified Emulsions
chapter |10 pages
Pavement and Materials Technology Review for municipalities—including a case study
part |2 pages
Experimental characterization of asphaltic materials—I
chapter |12 pages
Field applications of portable infrared spectroscopy to asphalt products
chapter |8 pages
Experimental investigation of frost/thaw effects on bituminous mixes under wet conditions
chapter |8 pages
Determination of discrete retardation spectra of asphalt binders using Modified Windowing Method
part |2 pages
Life cycle cost analysis/modeling of compaction in the laboratory and in the field
chapter |10 pages
DAsphalt—Innovative asphalt mix for PPP projects with increased lifetime
chapter |10 pages
Superpave Gyratory Compactor as a compaction predictor tool for unbound material
chapter |12 pages
Including asphalt cooling and rolling regimes in laboratory compaction procedures
part |2 pages
Perpetual pavements
chapter |10 pages
Oxidative aging of long-life asphalt pavements in Hong Kong
chapter |10 pages
Mechanistic responses in perpetual pavement
chapter |10 pages
Long life surfaces for busy roads
chapter |10 pages
Optimising long life low noise porous asphalt
part |2 pages
Pavement management systems
chapter |12 pages
A performance-based Pavement Management System for the road network of Montreal city—a conceptual framework
chapter |8 pages
Noise related to pavement preservation surfaces in NJ
chapter |10 pages
Significance of non-load related distresses on airfield asphalt pavements: Review of 25 years of pavement management data
chapter |12 pages
Analysis of rolling resistance models to analyse vehicle fuel consumption as a function of pavement properties
part |2 pages
Additives and modifiers for asphalt concrete—II
chapter |10 pages
Physicochemical characteristics of RAP binder blends
chapter |10 pages
Evaluation of test sections with Polymer Modified Bitumens
chapter |12 pages
The low temperature characterization of bio-modified shingles
chapter |12 pages
Optical fiber sensors with flexible encapsulation for pavement behavior monitoring
part |2 pages
Sustainable asphalt technologies—I
chapter |10 pages
New surface layers with low rolling resistance tested in Denmark
chapter |12 pages
Development of water-based curing reactive cold asphalt repair material
chapter |10 pages
Effect of moisture on asphalt mastic tensile properties at ambient temperature
part |2 pages
Experimental characterization of asphaltic materials—II
chapter |14 pages
Triaxial Cyclic Compression Testing of hot mix asphalt with cyclic confining pressure
chapter |16 pages
Impact of field ageing on low-temperature performance of binder and hot mix asphalt
chapter |8 pages
Advanced Shear Tester for solid and layered samples
chapter |12 pages
Effect of cooling rate on the thermo-volumetric, thermo-viscoelastic, and fracture properties of asphalt mixtures
part |2 pages
Nondestructive testing of asphalt pavement
chapter |8 pages
Study of the cavity problem under the pavement caused by the earthquake in 2011
chapter |12 pages
Performance of Permeable Friction Course (PFC) pavements over time
chapter |10 pages
Implementation of algorithms for asphalt moduli temperature correction
chapter |10 pages
Use of distributed fiber optic sensors to detect damage in a pavement
part |2 pages
Pavement condition survey/pavement smoothness/quality control/quality assurance
chapter |10 pages
Evaluation of fatigue damage in asphalt pavement using FWD dissipated work
chapter |10 pages
Estimation of a longitudinal true profile for expressway pavements by a mobile profiling system
chapter |8 pages
A study on profile improvement in pavement repair
chapter |24 pages
Assess asphalt in-place density with Intelligent Compaction measurements
part |2 pages
Microstructural characterization and micromechanics of asphaltic materials—I
chapter |6 pages
Automatic generation of micromechanical numerical simulation model of asphalt concrete with visco-elastic properties
chapter |10 pages
Understanding the microstructure of bitumen: A CLSM and fluorescence approach to model bitumen ageing behavior
chapter |10 pages
A constitutive model for simulation of water to ice phase change in asphalt mixtures
chapter |10 pages
Comparing image processing techniques for asphalt concrete X-ray CT images
part |2 pages
Long-term pavement performance prediction—I
chapter |8 pages
Effect of saturated ageing on fatigue behavior of asphalt pavements
chapter |10 pages
Influence of moisture on Resilient Deformation behaviour of Unbound Granular Materials
part |2 pages
Experimental characterization of asphaltic materials—III
chapter |12 pages
Discrete Element Modelling and experimental study on dilation behaviour of asphalt mixtures
chapter |10 pages
Fatigue characters of asphalt multilayer surfacing system on steel bridge deck based on the five-point bending tests
chapter |8 pages
Determination of binder-aggregate adhesion by contact angle measurement
chapter |10 pages
Investigation of asphalt mixture strength statistics at low temperature based on size effect analysis
part |2 pages
Mineral aggregate in asphalt concrete/mix design methodology/novel methods to aid mix design
chapter |12 pages
Effect of fine aggregate form, angularity and texture on the viscoelastic properties of asphalt mortar
chapter |12 pages
Research on fractal features of basalt aggregate surface topography
chapter |10 pages
Design of cement stabilized full depth reclaimed mixes using Superpave Gyratory Compactor
chapter |8 pages
Hot Mix Asphalt for airfield pavements—moving from Marshall mix design to Superpave
chapter |10 pages
Implementation of a static strength test for evaluating the rutting resistance of asphalt mixtures and its application for quality controls
part |2 pages
Warm mix asphalt technologies—I
chapter |10 pages
Moisture susceptibility of Warm-Mix Asphalt
chapter |8 pages
Evaluation of Warm Mix Asphalt technology for surface mixtures
chapter |12 pages
Study on the improved recycled asphalt mixtures by microbubble-foamed asphalt
chapter |10 pages
Workability and coatability of foamed Warm-Mix Asphalt
chapter |12 pages
Cleaner Warm-Mix Asphalt (CWMA) at macro level: Case study for the United States
part |2 pages
Innovative pavement analysis and design—I
chapter |10 pages
Retrofitted fully permeable shoulders as a stormwater management strategy on highways
chapter |10 pages
Laboratory characterization of North Carolina base course aggregates for permanent deformation model development and calibration
chapter |10 pages
Towards a sustainable surfacing system for the long-spanned orthotropic steel bridge deck in China Part I: State-of-the-practice
chapter |10 pages
Rutting and cracking modeling of asphalt pavements considering nonlinear viscoelasticity and cohesive zone fracture
chapter |10 pages
The application of strain limit based design to heavy industrial pavements
part |2 pages
Pavement response analysis under static and moving wheel loads—I
chapter |8 pages
Determination of an equivalent elastic system to a multilayer viscoelastic structure: Application to the case of thick flexible pavement
chapter |8 pages
Best sensing location in pavement to compare loading conditions
chapter |10 pages
Structural and functional deterioration of porous asphalt pavement under moving wheel load in laboratory
chapter |12 pages
Heavy Vehicle Simulator tests at VTI
part |2 pages
Experimental characterization of asphaltic materials—IV
chapter |12 pages
Effect of asphalt binder oxidation on the modulus of asphalt concrete mixtures
chapter |10 pages
Evaluation of cracking resistance of Superpave mixtures in Kansas
chapter |12 pages
An experimental study on viscoelastic behaviour of bituminous mastics
chapter |10 pages
Viscoplastic strain modeling of asphalt binder based on repeated creep recovery test
chapter |10 pages
Fatigue performance and stiffness properties of Stone Mastic Asphalts with steel slag and coal ash
part |2 pages
Additives and modifiers for asphalt concrete—III
chapter |10 pages
Comparison between SBS and crumb rubber modified asphalt—laboratory and field study
chapter |10 pages
Mechanical influence of mineral fillers on asphalt mixture cracking behaviour
chapter |8 pages
Decay law of Cement-Emulsified-Asphalt-Cold-Recycled Mixture (CEACRM) in recycling process
chapter |12 pages
Investigating effect of amine based additives on asphalt rubber rheological properties
part |2 pages
Microstructural characterization and micromechanics of asphaltic materials—II
chapter |8 pages
Micro-scale investigation of oxygen diffusion on bitumen surfaces
chapter |10 pages
Multiscale modeling of asphaltic media considering heterogeneity, viscoelasticity, and nonlinear fracture damage
chapter |10 pages
Structuralization as characteristic to link the mechanical behaviours of asphalt concrete at different length scales
chapter |8 pages
Simulation of drying aggregate in asphalt plants
part |2 pages
Experimental characterization of asphaltic materials—V
chapter |10 pages
Evaluation of gradation-based criteria for cracking performance
chapter |8 pages
Characterization of nonlinear viscoelastic material properties of asphalt materials in multiple length scales
chapter |10 pages
Usage of advanced functions of Dynamic Shear Rheometer for the selection of a suitable binder for asphalt mixtures
chapter |10 pages
Possibilities of a hollow cylinder tester for asphalt mixtures
part |2 pages
Recycling—I
chapter |10 pages
Rutting and cracking potential of HMA consisting of RAP
chapter |10 pages
Workability of WMA and WMA-RAP mixtures and relationship to field compaction
chapter |10 pages
Effect of lime on short-term bearing capacity of bitumen emulsion recycled mixtures
chapter |10 pages
Performance evaluation of Cement Grouted Bituminous mixes
part |2 pages
Modeling of asphaltic materials and pavements