Breadcrumbs Section. Click here to navigate to respective pages.
Book
Book
Manufacturing and Engineering Technology (ICMET 2014)
DOI link for Manufacturing and Engineering Technology (ICMET 2014)
Manufacturing and Engineering Technology (ICMET 2014) book
Proceedings of the 2014 International Conference on Manufacturing and Engineering Technology, San-ya, China, October 17-19, 2014
Manufacturing and Engineering Technology (ICMET 2014)
DOI link for Manufacturing and Engineering Technology (ICMET 2014)
Manufacturing and Engineering Technology (ICMET 2014) book
Proceedings of the 2014 International Conference on Manufacturing and Engineering Technology, San-ya, China, October 17-19, 2014
Edited ByAi Sheng, Yizhong Wang
Edition 1st Edition
First Published 2014
eBook Published 24 November 2014
Pub. Location London
Imprint CRC Press
Pages 636
eBook ISBN 9780429227172
Subjects Engineering & Technology
Share
Get Citation
Sheng, A., & Wang, Y. (Eds.). (2014). Manufacturing and Engineering Technology (ICMET 2014): Proceedings of the 2014 International Conference on Manufacturing and Engineering Technology, San-ya, China, October 17-19, 2014 (1st ed.). CRC Press. https://doi.org/10.1201/b17735
ABSTRACT
Manufacturing and Engineering Technology brings together around 200 peer-reviewed papers presented at the 2014 International Conference on Manufacturing and Engineering Technology, held in San-ya, China, October 17-19, 2014.The main objective of these proceedings is to take the Manufacturing and Engineering Technology discussion a step further. Con
TABLE OF CONTENTS
chapter |4 pages
Design of wireless communication platform of MCU based on Wi-Fi
Mei-Li Wen, Jing-Cun Wang & Xiang Wang
ByM.-L. Wen, J.-C. Wang & X. Wang
chapter |4 pages
The controlled blasting technology of sewage treatment pool concrete wall water hole in complicated environment
ByP. Huang, E.H. Wu, Q.S. Liu, S.L. Yang & J. Li
chapter |6 pages
Research based on thermal shock in gear temperature field and stress field
ByD. Wang, G.H. Li, H.J. Zhang & X.S. Ma
chapter |6 pages
Study on the setting and evaluation of left-turn waiting area at signalized intersections
ByB.Q. Sun & J.Y. Chen
chapter |6 pages
Consider tooth surface forming error of spiral bevel gears parameterized modeling and modification technology research
ByZ.H. Zhou, K. Huang & Y.S. Xiong
chapter |4 pages
A reliability allocation method for Weapon Systems based on multi-expert blur theory
Xian-Jie Wei & Jing-Shan Xue
ByX.-J. Wei & J.-S. Xue
chapter |4 pages
Research on system reliability allocation based on BP neural network and improved algebraic method
Jing-Shan Xue, Yin-Shuo Zhang & Xian-Jie Wei
ByJ.-S. Xue, Y.-S. Zhang & X.-J. Wei
chapter |4 pages
The design and realization of a user mode device driver framework
ByH.J. Bian, X.X. Zhao, J.H. Lei & H.C. Ou
chapter |6 pages
The research on the planning strategy of rural environmental image improvement— taking Tiangongsi village of Baoding as an example
J.Y. Guo Y.H. Wang
ByJ.Y. Guo, Y.H. Wang & L.N. Feng
chapter |6 pages
Trajectory optimization with multiple constraints for a guided bomb using a pseudospectral method
ByY.B. Yuan & K. Zhang
chapter |4 pages
The research and design of terminal data security in power system
ByW.W. Li, T. Zhang, Y.Y. Ma & S. Deng
chapter |4 pages
Study on crash simulation and structure optimization of rear bumper of the truck
Xin-Na Ye Wei Huang
ByX.-N. Ye, W. Huang & H.-C. Yuan
chapter |6 pages
Impact analysis of optimized rear bumper of the truck (mobile barrier 50% bias)
Shun-Li Feng & Xin-Na Ye Zhi-Yong Zhang
ByS.-L. Feng, X.-N. Ye & Z.-Y. Zhang
chapter |4 pages
2DLDA based semi-supervised face recognition
Wei-Min Shi & Xi-Yang Yang
ByW.-M. Shi & X.-Y. Yang
chapter |4 pages
Reheating furnace model system based on Message-Oriented Middleware
ByL. He, K. Chen, H.L. Ke & Y.H. Peng
chapter |4 pages
Research of the effects fabric performance for outside contour loose quantity of the fold collar
ByY.N. Han & Y. Liu
chapter |6 pages
Corrosion behavior of X80 pipeline steel in soil environment containing Sulfate-Reducing Bacteria
ByD. Wang, M. Wu, F. Xie, L. Ge, W.J. Zhang & Y. Fu
chapter |6 pages
The application of torsion angle method in shaft dynamic torque measurement
ByX.Y. Zi, S. Geng & S.F. Zhao
chapter |4 pages
The application of torque-sensitive materials in shaft dynamic torque measurement
ByX.Y. Zi, S. Geng, H. Wu & S.F. Zhao
chapter |6 pages
Research on evaluation method of design schemes for customized product based on house of quality and its applications
ByY.K. Ding, F.F. Zhu, W.Y. Shi & X.S. Xu
chapter |6 pages
Research on the tungsten alloy long-rod penetrator penetrating concrete target
ByG.Y. Hang, W.L. Yu, T. Wang, J.T. Wang & Z. Li
chapter |4 pages
The research of photocatalytic degradation of compound TiO2 film in dyeing wastewater
ByL. Wang, C.S. Hao & M.X. Li
chapter |4 pages
The influence of line spacing and text background on visual search of web pages
ByN.N. Zhang & D. Xu
chapter |4 pages
Study on pre-drainage seam gas technology with borehole drilled along seam in outburst and soft mine
Zhi-Lei Wang Zhi-Lei Li
ByZ.-L. Wang, Z.-L. Li & A.-M. Liang
chapter |6 pages
Research on the master/slave model of the parallel processing technology for homogeneous multicore DSP
ByM.J. Wu, H.Y. Zhao, S.Y. Xie, W.W. Wu, X.F. Zhang & N.C. Yuan
chapter |6 pages
Research key technologies of the current network security situation awareness
ByX.J. Guan, T. Zhang, Y.Y. Ma & S. Deng
chapter |4 pages
Study on the data mining method of vehicle insurance based on a rough set
ByH. Che, J. Cheng & W.P. Ding
chapter |4 pages
Assessment for the fire risk of the underground parking area
ByH. Che, W.P. Ding & J. Cheng
chapter |6 pages
Deep-hole precision processing method of pin bush
ByH.H. Chen, Q.T. Wu, F.M. Nie, B.G. Hu & Z. Kang
chapter |6 pages
Workflow-based airworthiness certification document flow and its management system
ByX.B. Yan, J.J. Jiang, J.B. Wang & Y.M. Cao
chapter |6 pages
Influence of fit tolerance between square tenon thickness and oval mortise width on ultimate pulling resistance
Ming Chen, Yong-Qian Yang, Xi Wu & Jian-Hua Lyu
ByM. Chen, Y.-Q. Yang, X. Wu & J.-H. Lyu
chapter |6 pages
Influence of fit tolerance between tenon width and mortise length on joint performance of oval-tenon manufactured by Alnus formosana wood
Ming Chen, Zhi-Gang Cai, Yong-Qian Yang & Jian-Hua Lyu
ByM. Chen, Z.-G. Cai, Y.-Q. Yang & J.-H. Lyu
chapter |4 pages
Air flow noise analysis for the intake manifold based on CFD
ByP.H. Huang, J.C. Zhang & B. Feng
chapter |6 pages
Probabilistic design of spherical function mechanisms
ByA.P. Zhuang, J.F. Zhang, J.M. Liao & Y.J. Li
chapter |3 pages
An indirect measurement method of volumetric errors for linear axes in CNC machine tools
ByJ.W. Fan, Y.H. Tang & Y. Song
chapter |6 pages
CPOM to synthesis gas by ceria-promoted nickel nanowire catalyst
Xue-Bin Hong
ByX.-B. Hong
chapter |4 pages
Research and development of a multiple data source curve drawing software for IC equipment
ByN. Jin, A.D. Xu, M.Z. Liu, K. Wang & C.X. Wang
chapter |4 pages
Analysis and calculation for LV auxiliary power system short-circuit current of the fossil fuel power plant
ByH.Y. He, Z.H. Wang & N. Jin
chapter |6 pages
An open-source musculoskeletal model for lumbar force predictions
X.J. Meng D.E. Anderson
ByX.J. Meng, D.E. Anderson, A.G. Bruno, W.J. Wang, M.L. Bouxsein, S.B. Li & B. Cheng
chapter |4 pages
Improvement of the algorithm in addition to optimize the canal with the application
ByL.L. Deng & X. Zhang
chapter |6 pages
FA used in the development of the vending machine with the function of returning changes
Wei Wang & Hao Gu
ByW. Wang & H. Gu
chapter |4 pages
Research on the cost driver selection and combination in Activity-Based Costing
ByQ.Y. Cui, X.R. Dong & Y.Z. Ma
chapter |4 pages
First-principle simulations of quantum transport for a nanoscale InAs device
ByL.Y. Zhang, L. Fang, N. Xu & H.H. Sun
chapter |4 pages
Application and realization of remote control in power ultrasonic treatment
ByY.G. Kong, Y.Z. Yang & M.D. Luo
chapter |6 pages
A novel method for deriving reservoir operation curves based on the concept of dynamic variable sampling space
ByX. Wang, X.N. Guo, X. Chen, X.H. Lei, Y.Z. Jiang & H. Wang
chapter |4 pages
IETM data in the comprehensive utilization of equipment life cycle
ByJ. Zhang, H.Y. Zhao & J.Q. Zhang
chapter |4 pages
Research on the PV-Storage-Charging station method base on graph theory
ByJ. Yu, H. Ge & H.G. Wang
chapter |6 pages
Design of a multiplexing Pulse Power Source control system based on the CAN bus
ByX. Zhang & Z. Zhang
chapter |4 pages
Research on discrete bipolar switching effect in memristor device
Zhen-Sen Tang, Nuo Xu & Ru-Lin Liu Ya-Qing Chi
ByZ.-S. Tang, N. Xu, R.-L. Liu, Y.-Q. Chi & L. Fang
chapter |6 pages
Modification of the analytical model for drag bits in rotary rock drilling
ByZ.T. Li, Y.Z. Ma, L. Yin, F.X. Li & F. Jin
chapter |4 pages
Influence of titanium on hot-dip 55% Al–Zn alloy coating
T.X. Guo C.S. Liu
ByT.X. Guo, C.S. Liu & Y.L. Zhou
chapter |4 pages
Designing and testing the control circuit for the base current of SiC transistors
ByT. Jing & H.B. Wang
chapter |4 pages
Research of a cold-chain logistics security monitoring platform based on Internet of things
ByH.B. Wang & T. Jing
chapter |6 pages
The study of the causes of the impact of RMB appreciation on service export
ByQ.C. Wu
chapter |4 pages
Gray correlation of China’s logistics capability and the growth of agriculture economy
ByX.M. Liu & Z.H. Ouyang
chapter |6 pages
E-commerce development strategy and platform establishment for the agricultural products of Quanzhou city
ByW.C. Hong
chapter |4 pages
Target detection and tracking based on digital image
ByJ.X. Wang, Y.L. Wang & H.B. Kang
chapter |4 pages
Research and implementation of retrieval technology based on image content
ByJ.X. Wang, Y.L. Wang & H.Y. Sun
chapter |6 pages
Hybrid ring coupler with arbitrary power division using phase inverters
Ning Zhang & Cui-Lin Zhong Xin-He Xu
ByN. Zhang, C.-L. Zhong, X.-H. Xu & Y.-P. Sun
chapter |4 pages
Research on developing a log system based on .Net
Yan-Li Liu, Yu-Hao Liu & Xin Wang Yun-Bo Zhang
ByY.-L. Liu, Y.-H. Liu, X. Wang, Y.-B. Zhang & X.-Z. Cheng
chapter |6 pages
Kinematic analysis of a deployable mast used for solar cell arrays
ByH.Y. Tan, Y.J. Hu, L. Ling & J.L. Li
chapter |4 pages
Research on the genetic algorithm-based all-terminal network optimization
ByG.Z. Zou & X.L. Huang
chapter |6 pages
Evaluation of an equipment operation maintenance plan based on the AHP and entropy weight methods
ByT.P. Li, Y.L. Qian & Y. Li
chapter |6 pages
A new guidance method for reentry warhead against a stationary target
ByZ.D. Hu, X.M. Tang, F.Y. Zhou & Z.J. Li
chapter |6 pages
Magnetorheological elastomer damper design and finite-element analysis
W.J. Xu Z. Ren
ByW.J. Xu, Z. Ren, J.Y. Wang, T.S. Zhang, C. Zhao & C.R. Tang
chapter |6 pages
Research on a new cloud trust model and its defense abilities
ByM.H. Yang, Z.P. Wang & J.J. Yao
chapter |4 pages
A secure data access method based on eID for mobile Internet
ByM.H. Yang, J.J. Yao & Z.X. Liu
chapter |4 pages
Research on security access control method of power intranet terminal
L. Chen X. Liu
ByL. Chen, X. Liu & S. Deng
chapter |4 pages
An on-line monitoring system for the determination of ammonium nitrogen in waters
Kang-Lin Wei Qiong Fang
ByK.-L. Wei & Q. Fang
chapter 10|4 pages
Research on calculation of thermal electromotive force of second-class Pt-Rh 10%-Pt thermocouple on 100 temperature points based on LabVIEW
ByB. Zhou, J.H. Zhao, Y.K. Wei & D.D. Li
