Breadcrumbs Section. Click here to navigate to respective pages.
Book
Book
Geotechnical Risk and Safety
DOI link for Geotechnical Risk and Safety
Geotechnical Risk and Safety book
Proceedings of the 2nd International Symposium on Geotechnical Safety and Risk (IS-Gifu 2009) 11-12 June, 2009, Gifu, Japan - IS-Gifu2009
Geotechnical Risk and Safety
DOI link for Geotechnical Risk and Safety
Geotechnical Risk and Safety book
Proceedings of the 2nd International Symposium on Geotechnical Safety and Risk (IS-Gifu 2009) 11-12 June, 2009, Gifu, Japan - IS-Gifu2009
Edited ByYusuke Honjo, Makoto Suzuki, Takashi Hara, Feng Zhang
Edition 1st Edition
First Published 2009
eBook Published 12 June 2009
Pub. Location London
Imprint CRC Press
Pages 400
eBook ISBN 9780429206665
Subjects Engineering & Technology
Share
Get Citation
Honjo, Y., Suzuki, M., Hara, T., & Zhang, F. (Eds.). (2009). Geotechnical Risk and Safety: Proceedings of the 2nd International Symposium on Geotechnical Safety and Risk (IS-Gifu 2009) 11-12 June, 2009, Gifu, Japan - IS-Gifu2009 (1st ed.). CRC Press. https://doi.org/10.1201/9780203867310
ABSTRACT
Communication of risks within a transparent and accountable framework is essential in view of increasing mobility and the complexity of the modern society and the field of geotechnical engineering does not form an exception. As a result, modern risk assessment and management are required in all aspects of geotechnical issues, such as planning, desi
TABLE OF CONTENTS
part |2 pages
Wilson Tang lecture
part |2 pages
Keynote lectures
chapter |12 pages
Risk management and its application in mountainous highway construction
ByH.W. Huang, Y.D. Xue &Y.Y. Yang
chapter |10 pages
Recent revision of Japanese Technical Standard for Port and Harbor Facilities based on a performance based design concept
ByT. Nagao, Y. Watabe, Y. Kikuchi &Y. Honjo
part |2 pages
Special lecture
chapter |16 pages
Interaction between Eurocode 7 – Geotechnical design and Eurocode 8 – Design for earthquake resistance of geotechnical structures
ByP.S. Sêco e Pinto
part |2 pages
Reliability benchmarking
chapter |6 pages
Reliability analysis of a benchmark problem for 1-D consolidation
ByJ.Y. Ching, K.-K. Phoon &Y.-H. Hsieh
chapter |8 pages
Study on determination of partial factors for geotechnical structure design
ByT.C. Kieu Le &Y. Honjo
chapter |6 pages
Reliability analysis of a benchmark problem for slope stability
ByY. Wang, Z.J. Cao, S.K. Au & Q.Wang
part |2 pages
Geotechnical code drafting based on limit state design and performance based design concepts
chapter |6 pages
Developing LRFD design specifications for bridge shallow foundations
ByS.G. Paikowsky, S. Amatya, K. Lesny & A. Kisse
chapter |8 pages
Limit states design concepts for reinforced soil walls in North America
ByR.J. Bathurst, B. Huang & T.M. Allen
chapter |8 pages
Loss of static equilibrium of a structure – Definition and verification of limit state EQU
ByB. Schuppener, B. Simpson, T.L.L. Orr, R. Frank & A.J. Bond
chapter |8 pages
Geotechnical criteria for serviceability limit state of horizontally loaded deep foundations
ByM. Shirato, T. Kohno & S. Nakatani
chapter |8 pages
Reliability-based code calibration of piles based on incomplete proof load tests
ByJ.Y. Ching, H.-D. Lin & M.-T. Yen
chapter |6 pages
Sensitivity analysis of design variables for caisson type quay wall
ByG.L. Yoon, H.Y. Kim, Y.W. Yoon & K.H. Lee
chapter |6 pages
Evaluating the reliability of a levee against seepage flow
ByY. Shimizu, Y. Yoshinami, M. Suzuki, T. Nakayama & H. Ichikawa
chapter |8 pages
Determination of partial factors for the verification of the bearing capacity of shallow foundations under open channels
ByA. Murakami, S. Nishimura, M. Suzuki, M. Mori, T. Kurata & T. Fujimura
chapter |4 pages
Application of concept in ‘Geo-code21’ to earth structures
ByM. Honda, Y. Kikuchi &Y. Honjo
chapter |8 pages
Probabilistic charts for shallow foundation settlements on granular soil
ByC. Cherubini & G. Vessia
chapter |4 pages
Resistance factor calibration based on FORM for driven steel pipe piles in Korea
ByJ.H. Park, J.H. Lee, M. Chung, K. Kwak & J. Huh
chapter |8 pages
An evaluation of the reliability of vertically loaded shallow foundations and grouped-pile foundations
ByT. Kohno, T. Nakaura, M. Shirato & S. Nakatani
chapter |8 pages
Study on rational ground parameter evaluation methods for the design and construction of large earth-retaining walls
ByY. Yamamoto, T. Hirose, M. Hagiwara, Y. Maeda, J. Koseki, J. Fukui & T. Oishi
chapter |8 pages
System reliability of slopes for circular slip surfaces
ByJ.-Y. Ching, Y.-G. Hu & K.-K. Phoon
chapter |8 pages
Correlation of horizontal subgrade reaction models for estimating resistance of piles perpendicular to pile axis
ByY. Kikuchi & M. Suzuki
part |2 pages
Risk management in geotechnical engineering
chapter |6 pages
The long and big tunnel fire evacuation simulation based on an acceptable level of risk and EXODUS software
ByS.-Q. Hao, H.-W. Huang &Y. Yuan
chapter |4 pages
Risk based decision support system for the pumping process in contaminated groundwater remediation
ByT. Hata &Y. Miyata
chapter |8 pages
A risk evaluation method of countermeasure for slope failure and rockfall with account of initial investment
ByT. Yuasa, K. Maeda & A.Waku
chapter |8 pages
Risk assessment on the construction of interchange station of Shanghai metro system
ByZ.W. Ning, X.Y. Xie & H.W. Huang
part |2 pages
Design method (1)
chapter |4 pages
A study of the new design method of irrigation ponds using sheet materials
ByM. Mukaitani, R. Yamamoto, Y. Okazaki & K. Tanaka
chapter |6 pages
Research on key technique of double-arch tunnel passing through water-eroded groove
ByY. Chen & X. Liu
chapter |8 pages
Safety measures by utilizing the old ridge road and potential risks of the land near old river alignments
ByM. Okuda, Y. Nakane, Y. Kani & K. Hayakawa
chapter |8 pages
Bearing capacity of rigid strip footings on frictional soils under eccentric and inclined loads
ByK.Yamamoto & M. Hira
part |2 pages
Uncertainty
chapter |6 pages
Reliability analysis of slope stability by advanced simulation with spreadsheet
ByS.K. Au, Y. Wang & Z.J. Cao
chapter |6 pages
Optimal moving window width in conjunction with intraclass correlation coefficient for identification of soil layer boundaries
ByJ.K. Lim, S.F. Ng, M.R. Selamat & E.K.H. Goh
chapter |8 pages
Reducing uncertainties in undrained shear strengths
ByJ.Y. Ching, Y.-C. Chen & K.-K. Phoon
chapter |8 pages
A case study on settlement prediction by spatial-temporal random process
ByP. Rungbanaphan, Y. Honjo & I. Yoshida
part |2 pages
Construction risk management
chapter |8 pages
Reliability analysis of a hydraulic fill slope with respect to liquefaction and breaching
ByT. Schweckendiek, G.A. van den Ham, M.B. de Groot, J.G. de Gijt, H. Brassinga & P. Hudig
chapter |6 pages
Guideline for monitoring and quality control at deep excavations
ByT.J. Bles, A. Verweij, J.W.M. Salemans, M. Korff, O. Oung, H.E. Brassinga & T.J.M. deWit
chapter |6 pages
A study on the empirical determination procedure of ground strength for seismic performance evaluation of road embankments
ByK. Ichii &Y. Hata
chapter |8 pages
Geo Risk Scan – Getting grips on geotechnical risks
ByT.J. Bles, M.Th. van Staveren, P.P.T. Litjens & P.M.C.B.M. Cools
chapter |6 pages
Reduction of landslide risk in substituting road of Germi-Chay dam
ByH.F. Aghajani & H. Soltani-Jigheh
part |2 pages
Risk assessment
chapter |8 pages
Probabilistic risk estimation for geohazards: A simulation approach
ByM. Uzielli, S. Lacasse & F. Nadim
chapter |8 pages
A research project for deterministic landslide risk assessment in Southern Italy: Methodological approach and preliminary results
ByF. Cotecchia, P. Lollino, F. Santaloia, C. Vitone & G. Mitaritonna
chapter |8 pages
Reliability-based performance evaluation for reinforced railway embankments in the static loading condition
ByM. Ishizuka, M. Shinoda &Y. Miyata
chapter |8 pages
Maximum likelihood analysis of case histories for probability of liquefaction
ByJ.Y. Ching, C. Hsein Juang &Y.-H. Hsieh
part |2 pages
Design method (2)
chapter |8 pages
Framework for evaluation of probability of failure of soil nail system
ByI.S.H. Harahap &W.P. Nanak
chapter |6 pages
Reliability analysis of embankment dams using Bayesian network
ByD.Q. Li, H.H. Liu & S.B. Wu
chapter |8 pages
Identification and characterization of liquefaction risks for high-speed railways in Portugal
ByP.A.L.F. Coelho & A.L.D. Costa
chapter |6 pages
Field characterization of patterns of random crack networks on vertical and horizontal soil surfaces
ByJ.H. Li & L.M. Zhang
chapter |8 pages
Stochastic methods for safety assessment of a European pilot site: Scheldt
ByM. Rajabalinejad, P.H.A.J.M. van Gelder & J.K. Vrijling
part |2 pages
A report by JGS chapter of TC23 limit state design in geotechnical engineering practice
chapter |18 pages
Code calibration in reliability based design level I verification format for geotechnical structures
ByY. Honjo, T.C. Kieu Le, T. Hara, M. Shirato, M. Suzuki &Y. Kikuchi
