ABSTRACT
Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018).
There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to):
• Experimental laboratory material characterization
• Field measurements and in situ material characterization
• Constitutive modeling and simulation
• Innovative pavement materials and interface systems
• Non-destructive measurement techniques
• Surface characterization, tire-surface interaction, pavement noise
• Pavement rehabilitation
• Case studies
Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.
TABLE OF CONTENTS
part |7 pages
Keynotes
part 1|27 pages
Modeling distress in flexible pavements
part 2|25 pages
Integrating material and structural response
part 3|25 pages
Structural health assessment
part 4|26 pages
Measuring and modeling mixture performance – 1
part 5|23 pages
Measuring and modeling mixture performance – 2
part 6|25 pages
Computational modeling to understand mixture production and behavior
part 7|28 pages
Measuring and modeling performance of asphalt binders
part 8|27 pages
Binders and emulsions: workability, adhesion and rheology
part 9|26 pages
Recycling in asphalt mixes
part 10|28 pages
Modeling and measurement of noise and tire-pavement interaction
part 11|23 pages
Pavement roughness: measuring, modeling and implications – 1
part 12|18 pages
Pavement roughness: measuring, modeling and implications – 2
part 13|25 pages
Developments in structural design of pavements
part 14|28 pages
Variability in mixture and pavement design
part 15|26 pages
Mixes and binders with additives and industrial waste
part 16|22 pages
Chemomechanics and aging of binders – 1
part 17|24 pages
Chemomechanics and aging of binders – 2
part 18|27 pages
Rigid pavements 1
part 19|15 pages
Rigid pavements 2
part 20|18 pages
Pavement Geotechnics 1
part 21|20 pages
Pavement Geotechnics 2
part 22|24 pages
Innovations in pavement maintenance, analysis, and design
part 23|24 pages
New asphalt mix paradigms
part 24|22 pages
Modeling and measurement of chip seals