ABSTRACT
Cone Penetration Testing 2018 contains the proceedings of the 4th International Symposium on Cone Penetration Testing (CPT’18, Delft, The Netherlands, 21-22 June 2018), and presents the latest developments relating to the use of cone penetration testing in geotechnical engineering. It focuses on the solution of geotechnical challenges using the cone penetration test (CPT), CPT add-on measurements and companion in-situ penetration tools (such as full flow and free fall penetrometers), with an emphasis on practical experience and application of research findings. The peer-reviewed papers have been authored by academics, researchers and practitioners from many countries worldwide and cover numerous important aspects, ranging from the development of innovative theoretical and numerical methods of interpretation, to real field applications.
This is an Open Access ebook, and can be found on www.taylorfrancis.com.
TABLE OF CONTENTS
part 1|1 pages
Keynote papers
chapter 1|21 pages
Penetrometer equipment and testing techniques for offshore design of foundations, anchors and pipelines
Size: 19.68 MB
chapter 2|20 pages
Inverse filtering procedure to correct cone penetration data for thin-layer and transition effects
Size: 17.10 MB
Size: 10.37 MB
part 2|1 pages
CPT’18 papers
Size: 4.35 MB
chapter 5|6 pages
On the use of CPT for the geotechnical characterization of a normally consolidated alluvial clay in Hull, UK
Size: 2.32 MB
Size: 5.43 MB
chapter 7|7 pages
Estimation of geotechnical parameters by CPTu and DMT data: A case study in Emilia Romagna (Italy)
Size: 5.40 MB
chapter 8|7 pages
Cone penetration testing on liquefiable layers identification and liquefaction potential evaluation
Size: 6.82 MB
Size: 3.10 MB
chapter 10|7 pages
Estimation of spatial variability properties of mine waste dump using CPTu results—case study
Size: 2.14 MB
Size: 1.76 MB
Size: 2.50 MB
Size: 5.55 MB
Size: 3.51 MB
Size: 1.55 MB
chapter 16|6 pages
Quantifying the effect of wave action on seabed surface sediment strength using a portable free fall penetrometer
Size: 3.74 MB
chapter 17|7 pages
Interpretation of seismic piezocone penetration test and advanced laboratory testing for a deep marine clay
Size: 7.29 MB
chapter 18|7 pages
CPT-based liquefaction assessment of CentrePort Wellington after the 2016 Kaikoura earthquake
Size: 7.66 MB
chapter 19|6 pages
Use of CPTu for design, monitoring and quality assurance of DC/DR ground improvement projects
Size: 2.26 MB
Size: 2.01 MB
chapter 21|7 pages
Evaluation of existing CPTu-based correlations for the deformation properties of Finnish soft clays
Size: 3.76 MB
Size: 5.25 MB
Size: 1.78 MB
Size: 2.13 MB
Size: 2.00 MB
chapter 27|7 pages
Geotechnical characterization of a very soft clay deposit in a stretch ofroad works
Size: 3.41 MB
Size: 3.39 MB
Size: 1.88 MB
Size: 2.02 MB
Size: 0.92 MB
Size: 3.25 MB
Size: 2.82 MB
chapter 34|6 pages
Effects of partial drainage on the assessment of the soil behaviour type using the CPT
Size: 3.85 MB
chapter 35|7 pages
Analysis of CPTU data for the geotechnical characterization of intermediate sediments
Size: 3.63 MB
Size: 0.96 MB
Size: 5.13 MB
Size: 2.20 MB
chapter 39|7 pages
Numerical simulation of cone penetration test in a small-volume calibration chamber: The effect of boundary conditions
Size: 1.99 MB
Size: 3.76 MB
chapter 41|6 pages
Soil classification of NGTS sand site (Øysand, Norway) based on CPTU, DMT and laboratory results
Size: 4.95 MB
Size: 1.50 MB
Size: 1.49 MB
chapter 44|7 pages
Interpreting improved geotechnical properties from RCPTUs in KCl-treated quick clays
Size: 2.62 MB
Size: 2.46 MB
Size: 2.30 MB
Size: 0.10 MB
chapter 48|6 pages
Thermophysical finite element analysis of thawing of frozen soil by means of HT-CPT cone penetrometer
Size: 5.63 MB
chapter 49|6 pages
Large deformation modelling of CPT probing in soft soil—pore water pressure analysis
Size: 1.47 MB
chapter 50|6 pages
The use of neural networks to develop CPT correlations for soils in northern Croatia
Size: 1.57 MB
Size: 1.45 MB
Size: 4.20 MB
chapter 53|6 pages
Impact of sample quality on CPTU correlations in clay—example from the Rakkestad clay
Size: 6.14 MB
chapter 54|6 pages
Use of the free fall cone penetrometer (FF-CPTU) in offshore landslide hazard assessment
Size: 4.46 MB
Size: 1.55 MB
chapter 56|6 pages
Some considerations related to the interpretation of cone penetration tests in sulphide clays in eastern Sweden
Size: 2.28 MB
chapter 57|6 pages
Effect of cone penetrometer type on CPTU results at a soft clay test site in Norway
Size: 6.76 MB
Size: 4.02 MB
chapter 59|4 pages
Applying breakage mechanics theory to estimate bearing capacity from CPT in polar snow
Size: 0.31 MB
Size: 2.25 MB
chapter 62|7 pages
A state parameter-based cavity expansion analysis for interpretation of CPT data in sands
Size: 6.31 MB
Size: 2.32 MB
Size: 3.10 MB
Size: 3.41 MB
chapter 66|6 pages
A method for predicting the undrained shear strength from piezocone dissipation test
Size: 3.59 MB
Size: 6.46 MB
Size: 3.52 MB
chapter 69|6 pages
CPT interpretation and correlations to SPT for near-shore marine Mediterranean soils
Size: 2.72 MB
chapter 70|7 pages
Characterization of a dense deep offshore sand with CPT and shear wave velocity profiling
Size: 4.09 MB
Size: 3.23 MB
Size: 1.48 MB
chapter 73|7 pages
Shallow depth characterisation and stress history assessment of an over-consolidated sand in Cuxhaven, Germany
Size: 4.91 MB
chapter 74|6 pages
Assessment of pile bearing capacity and load-settlement behavior, based on Cone Loading Test (CLT) results
Size: 4.42 MB
Size: 2.38 MB
Size: 0.35 MB
chapter 78|6 pages
Comparison of settlements obtained from zone load tests and those calculated from CPT and PMT results
Size: 0.68 MB
chapter 79|7 pages
Direct use of CPT data for numerical analysis of VHM loading of shallow foundations
Size: 3.24 MB
chapter 80|7 pages
Evaluation of existing CPTu-based correlations for the undrained shear strength of soft Finnish clays
Size: 2.61 MB
chapter 81|6 pages
Applications of RCPTU and SCPTU with other geophysical test methods in geotechnical practice
Size: 5.52 MB
Size: 5.20 MB
Size: 0.70 MB
chapter 84|6 pages
In situ characterisation of gas hydrate-bearing clayey sediments in the Gulf of Guinea
Size: 2.31 MB
chapter 85|5 pages
Gas effect on CPTu and dissipation test carried out on natural soft-soil of Barcelona Port
Size: 4.05 MB
chapter 86|5 pages
Comparison of cavity expansion and material point method for simulation of cone penetration in sand
Size: 2.17 MB
chapter 87|6 pages
Soil behavior and pile design: Lesson learned from some prediction events—part 1: Aged and residual soils
Size: 7.56 MB
chapter 88|5 pages
Soil behavior and pile design: Lesson learned from recent prediction events—part 2: Unusual NC soils
Size: 5.20 MB
chapter 89|6 pages
A probabilistic approach to CPTU interpretation for regional-scale geotechnical modelling
Size: 7.49 MB
Size: 0.95 MB
chapter 91|6 pages
Interpretation of soil stratigraphy and geotechnical parameters from CPTu at Bhola, Bangladesh
Size: 4.00 MB
Size: 3.95 MB
Size: 1.20 MB
Size: 5.10 MB
chapter 95|7 pages
Comparative analysis of liquefaction susceptibility assessment by CPTu and SPT tests
Size: 4.01 MB
Size: 1.34 MB
chapter 97|6 pages
Comparison of mini CPT cone (2 cm2) vs. normal CPT cone (10 cm2 or 15 cm2) data, 2 case studies
Size: 4.45 MB
chapter 98|5 pages
The development of “Push-heat”, a combined CPT-testing/thermal conductivity measurement system
Size: 3.71 MB
chapter 99|7 pages
Free fall penetrometer tests in sand: Determining the equivalent static resistance
Size: 3.62 MB
Size: 3.57 MB
chapter 101|6 pages
Shear strengths determined for soil stability analysis using the digital Icone Vane
Size: 4.94 MB
chapter 102|7 pages
Metal objects detected and standard parameters measured in a single CPT using the Icone with Magneto click-on module
Size: 4.51 MB
chapter 103|7 pages
Simulation of liquefaction and consequences of interbedded soil deposits using CPT data
Size: 4.69 MB
Size: 5.39 MB
