ABSTRACT
This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world.
Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering.
The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.
TABLE OF CONTENTS
part |8 pages
FAZLUR R. KHAN LECTURE
part |88 pages
KEYNOTE LECTURES
part |96 pages
MINI-SYMPOSIA
part |82 pages
MS2: Vibration-based structural health monitoring, damage identification and residual lifetime estimation
part |102 pages
MS3: Probabilistic assessment of existing structures
part |54 pages
MS4: Risk and reliability acceptance criteria
part |80 pages
MS5: Early BIM for life-cycle performance
part |138 pages
MS6: Performance of concrete during life-cycle
part |108 pages
MS7: Life-cycle engineering for hydraulic structures, levees, and other water related infrastructure
part |140 pages
MS8: IEA EBC Annex 72: Assessing life-cycle related environmental impacts caused by buildings
part |58 pages
MS9: Multi-hazard resilience assessment in a life-cycle context
part |52 pages
MS10: Next generation asset management of civil infrastructure systems
part |90 pages
MS11: Life-cycle performance of structure and infrastructure under uncertainty
part |60 pages
MS12: Life-cycle redundancy, robustness and resilience indicators for aging structural systems under multiple hazards
part |98 pages
MS13: Advances in Structural Health Monitoring for real-world applications
part |26 pages
MS14: Monitoring of structures for informed-decision making
part |54 pages
MS15: Probability-based service life design of reinforced concrete structures exposed to reinforcement corrosion
part |58 pages
MS16: Life-cycle maintenance and management for urban infrastructures with big data
part |158 pages
MS17: Life-cycle management as focus area within asset management
part |68 pages
MS18: Serviceability of underground structures
part |42 pages
MS19: Circular economy to improve sustainability of infrastructure
part |48 pages
SPECIAL SESSIONS
part |50 pages
SS2: Climate adaptation engineering
part |60 pages
SS3: Quality control procedures on the life-cycle management of existing bridges
part |96 pages
SS4: Modeling time-dependent behavior and deterioration of concrete
part |110 pages
SS6: TRUSS ITN—reducing uncertainty in structural safety
part |30 pages
SS7: Application of probabilistic methods in fire safety engineering
part |28 pages
SS8: Bespoke models for marine structural management
part |18 pages
SS9: Novel materials and systems for life-cycle structural health monitoring
part |74 pages
SS10: Value of structural health monitoring information for the life-cycle management of civil structures
part |64 pages
SS11: Design for robustness of steel and steel-concrete composite structures
part |84 pages
SS12: Repair and self-repair of concrete
part |48 pages
SS13: Life-cycle of slope and river bank protection system considering soil bioengineering as well as conventional structures
part |-130 pages
SS14: Advanced NDT for visualization and quantification of concrete deterioration and repair effects
part |38 pages
SS15: PROGRESS—Provisions for Greater Reuse of Steel Structures
part |38 pages
SS16: Life-cycle asset management for railway-structures (LeCIE)
part |24 pages
SS17: INFRASTAR—fatigue reliability analysis of wind turbine and bridge structures
part |32 pages
SS18: The impact of BIM and web technologies in the life-cycle of our built environment
part |58 pages
GENERAL SESSIONS
part |34 pages
GS2: Durability
part |48 pages
GS3: Concrete structures
part |48 pages
GS4: Nonlinear analysis and structural optimization
part |66 pages
GS5: Earthquake engineering
part |28 pages
GS6: Traffic load modelling
part |66 pages
GS7: Bridge engineering
part |130 pages
GS8: Life-cycle assessment
part |60 pages
GS9: Assessment of existing structures