Accessibility Disclaimer
ABSTRACT
Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing
TABLE OF CONTENTS
Size: 0.02 MB
chapter 1|10 pages
Evaluation of binder properties Laboratory study on interlayer bonding using cationic tack coats
Title
Size: 0.30 MB
chapter |10 pages
Factors affecting recovered asphalt binder properties: A theoretical and experimental study
Title
Size: 0.83 MB
Size: 0.32 MB
Size: 0.78 MB
Size: 0.47 MB
chapter |8 pages
Evaluation of initial road performance correlating with different tests of binders
Title
Size: 0.21 MB
chapter |8 pages
Laboratory study of environmental performance of binders by headspace gas chromatography
Title
Size: 0.36 MB
chapter |12 pages
New fatigue test on bituminous binders and mastics using an annular shear rheometer prototype and waves propagation
Title
Size: 0.86 MB
Size: 0.50 MB
Size: 0.17 MB
chapter |10 pages
Principal component analysis of rheological and hardening data from bituminous binders
Title
Size: 0.47 MB
chapter |14 pages
Rheological and functional evaluation of the interactions between bitumen and rubber
Title
Size: 0.43 MB
Size: 0.97 MB
Size: 0.34 MB
chapter |8 pages
First-principles investigation of the multiple phases in bituminous materials: The case of asphaltene stacking
Title
Size: 0.40 MB
Size: 0.87 MB
Size: 0.02 MB
chapter |12 pages
Chemical characterization of laboratory and field bitumen aging in Porous Asphalt Concrete
Title
Size: 0.38 MB
chapter |10 pages
Influence of temperature and aging on laboratory fatigue performance of asphalt mixtures
Title
Size: 0.24 MB
chapter |10 pages
Impact of freeze-thaw cycles on the performance of asphalt mixture based permeability
Title
Size: 0.31 MB
chapter |12 pages
Formulation of authoritative temperature gradients for an analytical design process of flexible pavements using statistical techniques
Title
Size: 0.31 MB
Size: 0.28 MB
Size: 0.26 MB
chapter |10 pages
Investigation of friction properties of various road surfaces affecting road safety
Title
Size: 0.56 MB
chapter |10 pages
Combined experimental and numerical analysis of moisture infiltration in the modified Lottman test
Title
Size: 0.57 MB
chapter |12 pages
Assessment of moisture effect on open graded mixes using water sensitivity and Cántabro after immersion tests
Title
Size: 0.51 MB
Size: 0.33 MB
Size: 0.25 MB
chapter |10 pages
Testing of low temperature behaviour of asphalt mixtures in bending creep test
Title
Size: 0.24 MB
chapter |10 pages
Effect of beam size on the creep stiffness of asphalt mixtures at low temperatures
Title
Size: 0.35 MB
Size: 0.19 MB
Size: 0.55 MB
Size: 0.02 MB
chapter 3|8 pages
Hot bituminous mixtures characterization and design Optimum loading speed for deformation strength test of bitumen mixtures
Title
Size: 0.35 MB
chapter |10 pages
Enhanced algorithms for the derivation of material parameters from triaxial cyclic compression tests on asphalt specimen
Title
Size: 0.85 MB
chapter |10 pages
Research on coordinating deformation between Fiber Bragg Grating strain sensor and asphalt mixture
Title
Size: 0.72 MB
Size: 0.32 MB
Size: 0.28 MB
chapter |14 pages
“Liquefaction” of asphalt caused by cyclic loading, as a potential reason of extreme rutting
Title
Size: 0.59 MB
chapter |10 pages
Experimental investigation on the dynamic properties of asphalt concrete using filler with waste hydrated lime
Title
Size: 0.45 MB
chapter |10 pages
Monitoring and designing of wearing courses for orthotropic steel decks throughout the five-point bending test
Title
Size: 0.62 MB
chapter |10 pages
Evaluation of modified bitumen, High Modulus Asphalt Concrete and steel mesh as materials for road upgrading
Title
Size: 0.36 MB
chapter |10 pages
Theoretical investigation of the stress distribution in a Bimodular IDT specimen
Title
Size: 0.27 MB
chapter |14 pages
Investigation of Alkali-Silica Reaction in asphalt mixtures exposed to potassium acetate deicing solution
Title
Size: 0.73 MB
chapter |10 pages
Laboratory tests used in Cuba as low financial resources country for the evaluation of the mechanical properties of the asphalt mix
Title
Size: 0.27 MB
chapter |10 pages
Polypropylene fiber modification of asphalt by using mechanical and optical means
Title
Size: 0.31 MB
chapter |10 pages
Evaluation of Petroleum-Contaminated Soil effect on the properties of hot-mix asphalt concrete using dynamic modulus |E*| and indirect tensile tests
Title
Size: 0.47 MB
Size: 0.64 MB
Size: 0.54 MB
Size: 0.26 MB
chapter |10 pages
Viscoelastic response of asphalt-aggregate mixes to transient confining conditions
Title
Size: 0.36 MB
chapter |8 pages
Evaluation of creep compliance of rubberized asphalt in compare with conventional hot mix asphalt
Title
Size: 0.37 MB
chapter |10 pages
Characterizing volumetric deformation behavior of naturally occurring bituminous sand materials
Title
Size: 0.40 MB
Size: 0.55 MB
chapter |10 pages
Evaluation on the shear performance of asphalt mixture through triaxial shear test
Title
Size: 0.32 MB
Size: 0.51 MB
chapter |10 pages
Evaluation of performance grading parameters for crumb rubber modified asphalt binders and mixtures
Title
Size: 0.54 MB
Size: 0.02 MB
chapter 4|10 pages
Warm and cold bituminous mixtures characterization Design method for cold and warm emulsion mixtures based on links between laboratory and field
Title
Size: 0.21 MB
chapter |8 pages
Fundamental property evaluation of styrene monomer modified warm-mix asphalt concrete
Title
Size: 0.28 MB
Size: 0.30 MB
Size: 0.38 MB
chapter |10 pages
Laboratory performance-based assessment of half-warm mix asphalts with high recycling rate by means of the factorial experiment design approach
Title
Size: 0.62 MB
chapter |14 pages
Evaluation of the rheological behaviour of Warm Mix Asphalt (WMA) modified binders
Title
Size: 0.93 MB
Size: 0.09 MB
Size: 0.06 MB
Size: 0.06 MB
chapter |2 pages
The cracking device with temperature control for the laboratory identification of the road material performance
Title
Size: 0.03 MB
Size: 0.02 MB
chapter |12 pages
Modeling of Top-Down Cracking (TDC) propagation in asphalt concrete pavements using fracture mechanics theory
Title
Size: 0.64 MB
chapter |6 pages
The cracking device with temperature control for the laboratory identification of the road material performance
Title
Size: 0.43 MB
Size: 0.38 MB
chapter |8 pages
Experimental study on resistance to cracking of bituminous mixtures using the Fénix test
Title
Size: 0.37 MB
chapter |10 pages
Fatigue effects in uniaxial cyclic tensile stress test: The link between stiffness decrease and accumulation of irreversible strain
Title
Size: 0.75 MB
Size: 0.34 MB
Size: 0.69 MB
Size: 0.35 MB
chapter |12 pages
Investigation of the PH model as a prediction tool in fatigue bending tests with rest periods
Title
Size: 0.75 MB
chapter |12 pages
Fatigue behaviour of bitumen in tension-compression loading mode: Rheological analysis and comparison with mix fatigue
Title
Size: 0.45 MB
Size: 0.41 MB
Size: 0.57 MB
Size: 0.39 MB
chapter |10 pages
Simplified fatigue performance modeling of ALF pavements using VECD+3-D Finite Element Modeling
Title
Size: 0.49 MB
chapter |10 pages
Size effect investigation on fracturing of asphalt concrete using the cohesive softening Discrete Element Model
Title
Size: 0.54 MB
Size: 0.02 MB
chapter |10 pages
On the importance of performing accurate material characterization tests for bituminous materials
Title
Size: 0.56 MB
Size: 0.50 MB
chapter |10 pages
Application of simplified VECD modeling to the fatigue life prediction of asphalt concrete mixtures
Title
Size: 0.38 MB
chapter |10 pages
Experimental observation of asphalt mix characteristics in the range of low temperatures
Title
Size: 0.22 MB
chapter |10 pages
Calibration and validation of a visco-elasto-plastic constitutive model for bituminous conglomerates
Title
Size: 0.37 MB
Size: 0.34 MB
chapter |10 pages
The influence of the specimen shape on the results of the uniaxial tensile test
Title
Size: 0.53 MB
chapter |8 pages
Experience with triaxial loading systems for the testing of road construction materials
Title
Size: 0.93 MB
chapter |10 pages
The estimation of the dynamic modulus of asphalt mixture from creep test results
Title
Size: 0.35 MB
chapter |12 pages
Application of a balanced mix-design concept to thin asphalt overlay mixes: Minimizing rutting and reflective-cracking
Title
Size: 0.27 MB
Size: 1.25 MB
Size: 0.42 MB
Size: 0.02 MB
chapter |10 pages
Permanent deformation behaviour of bituminous mixtures containing incinerator bottom ash aggregates under uniaxial testing conditions
Title
Size: 0.50 MB
Size: 0.39 MB
chapter |8 pages
Effect of binder type on the permanent deformation resistance of asphalt mix at different temperatures
Title
Size: 0.27 MB
Size: 0.44 MB
Size: 0.40 MB
chapter |10 pages
Equiviscous temperature based on Low Shear Viscosity: Evaluation as binder indicator for rutting and critical discussion of the test procedure
Title
Size: 0.29 MB
chapter |10 pages
The effect of volumetric properties of asphalt concrete mixture to wheel track rutting with respect to EN and BS rutting test methods
Title
Size: 0.25 MB
Size: 0.28 MB
Size: 0.36 MB
Size: 0.02 MB
Size: 0.55 MB
chapter |12 pages
Dynamic approach for the evaluation of the load carrying capacity and stability of flexible pavements with the Falling Weight Deflectometer
Title
Size: 0.63 MB
Size: 0.39 MB
Size: 0.40 MB
Size: 0.57 MB
Size: 0.02 MB
chapter |12 pages
Utilization of aggregate production waste filler in cold recycling mix optimization
Title
Size: 0.22 MB
Size: 0.27 MB
Size: 0.17 MB
chapter |12 pages
The use of marginal materials in road constructions: Proposal of an eco-compatible section
Title
Size: 0.33 MB
chapter |8 pages
Influence of active filler, curing time, and moisture content on the strength properties of emulsion and foamed bitumen stabilized mix
Title
Size: 0.22 MB
chapter |10 pages
An experimental study on the recycling of powder extinguishers into bituminous mixtures
Title
Size: 0.65 MB
Size: 0.62 MB
chapter |10 pages
In-plant aspalt cold recycling in rehabilitation of Babaei expressway project
Title
Size: 0.32 MB
Size: 0.02 MB
Size: 0.39 MB
Size: 0.98 MB
chapter |10 pages
New tests for polymer-modified binders: Results of a Belgian round robin test
Title
Size: 0.16 MB
Size: 0.24 MB
Size: 0.43 MB
Size: 0.02 MB
Size: 0.48 MB
chapter |10 pages
Chemical spill tolerance of hot mix asphalts: New research and gaps identification
Title
Size: 0.80 MB
chapter |8 pages
Result of numerical analysis of efficacy geogrids on reinforced pavements' vertical and horizontal deformations
Title
Size: 0.56 MB
chapter |14 pages
Life cycle costs of typical asphalt pavement rehabilitation techniques in Colorado
Title
Size: 0.29 MB
chapter |10 pages
Quantification of the highway costs as a function of the road traffic and speed
Title
Size: 0.18 MB
