ABSTRACT
Innovations in Road, Railway and Airfield Bearing Capacity – Volume 1 comprises the first part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
TABLE OF CONTENTS
part |128 pages
Asphalt materials
chapter |15 pages
Comparing asphalt modified with recycled plastic polymers to conventional polymer modified asphalt
chapter |10 pages
Developing high performance asphalt mixtures with considerable amounts of recycled asphalt with a new chemical bitumen additive
chapter |10 pages
Study on low-temperature crack resistance of zirconium tungstate modified asphalt mastic and asphalt mixtures
chapter |11 pages
Evaluation air void content of drilled porous asphalt mixture cores using non-destructive X-ray computed tomography
chapter |9 pages
Experimental investigation on rheological property of bitumen influenced by preheating process
chapter |10 pages
Skid resistance properties against RAP content change in surface asphalt mixture
chapter |9 pages
Generation and propagation of reflective cracking and thermal cracking of asphalt pavement in cold regions of China
chapter |9 pages
Validation of national empirical pavement design approaches for cold recycled asphalt bases
chapter |12 pages
Ethylene-Octene-Copolymer as an alternative to Styrene-Butadiene-Styrene bitumen modifier
chapter |10 pages
Exploring correlations between the compressive modulus and the flexural modulus of asphalt concrete mixtures
chapter |11 pages
Viscoelastic characterization and comparison of Norwegian asphalt mixtures using dynamic modulus and IDT tests
part |21 pages
Granular materials
chapter |8 pages
Evaluating the effect of mineralogy and mechanical stability of recycled excavation materials by Los Angeles and micro-Deval test
chapter |11 pages
Freeze-thaw performance of granular roads stabilized with optimized gradation and clay slurry
part |42 pages
Stabilization and geogrids
chapter |9 pages
Evaluating the cost effectiveness of using various types of stabilized base layers in flexible pavements
chapter |10 pages
Waste paper ash as an alternative binder to improve the bearing capacity of road subgrades
chapter |11 pages
Experiences with the use of stabilisation geogrids in demonstrating an improvement in bearing capacity of recycled materials
part |43 pages
Airport design
chapter |15 pages
Introducing dynamic asphalt modulus to the design of flexible aircraft pavement structures
chapter |16 pages
Practical implications for the implementation of the new international airport pavement strength rating system
part |23 pages
Highway design
chapter |11 pages
Impact of introducing longer and heavier vehicles on the bearing capacity of pavement subgrades
part |13 pages
Concrete pavements
chapter |11 pages
Crack behavior of continuously Reinforced Concrete Pavements (CRCP) in Germany
part |90 pages
Modelling
chapter |11 pages
A model for the permanent deformation behavior of the unbound layers of pavements
chapter |11 pages
Development of simplified models to assess pavement structural condition on network level
chapter |6 pages
Predicting asphalt pavement temperatures as an input for a mechanistic pavement design in Central-European climate
chapter |10 pages
Stress random distributions on railway subgrade surface under train loads considering irregular shapes of ballast
chapter |10 pages
Modelling and predicting asphalt deflection values with artificial neural networks
chapter |10 pages
Analysis and modelling of the main causes of unsatisfactory quality of transportation infrastructures
chapter |11 pages
Influence of acceleration and deceleration of Super Heavy Loads (SHLs) on the service life of pavement structures
chapter |10 pages
Calibration of fatigue performance model for cement stabilized flexible pavements
part |32 pages
Case study
chapter |20 pages
Stone mastic asphalt as an ungrooved runway surface: Case study on Emerald airport
chapter |10 pages
Field investigation of the deterioration of flexible polymer modified pavements: A case study in northern New England
part |91 pages
NDT and APT
