ABSTRACT
This project is mainly focused on defending vehicles from unauthorised persons and fending off robbers. Using a biometric fingerprint security system, only sanctioned people can move the vehicle. This aids vehicle conservation. This system utilisation is expanding and imperative all over the world. Utilisation of hand readers is common in every application because it contains high security as compared to another. This project deals with the safety of the vehicle, which leads to the evaluation of the source (vehicle) by using global positioning system, global system mobile communication, and AT mega 328. To sense the finger, we can use a fingerprint sensor and start the vehicle, and it will be placed inside the vehicle. By using Arduino, we can read the data from the sensor and inspect it with the authorised data. And the sensor identifies the person as an authorised person or not. If sensor data and reserved data are both matched, then the vehicle will start. If it is a prowler, the ignition is rejected and you can't start the vehicle. In the case of unauthorised persons, the sensor sends the data to Arduino, and then Arduino sends the data to the global positioning system, which is used to send a text message and the location of the vehicle. In other cases, like attacking a vehicle, to observe the vibration and movements of the vehicle, we can use an accelerometer. If attacks on vehicles occur, then the accelerometer sends the data to the Arduino, then the Arduino reads the data and sends the message and location of the vehicle. We can use fingerprints, which is a unique key for each one, so it provides high security.
