ABSTRACT
VOLUME 1 Structural science and architecture engineering Visual support vector machine-based method for reliability-based design optimization 3 Y. Xie & Y.Z. Wu
Study on the tunnel group traffic accident risk using a fuzzy comprehensive evaluation model 9 B. Ma, R. Gao, Y. Gao, X.J. Wang & Z. Guo
Applications of new reinforcement methods in city tunnels for shield launching and arriving 13 H. Jun, J.B. Shi, W. Hong & W. Xiaobin
Research on the stress characteristics of concrete carrier pile based on finite element analysis 19 J.Y. Li, A.Q. Zhang & X.G. Han
Theoretical analysis of the deformation of shield tunnel segment under fire 25 X.B. Han, Y.X. Xia & L.L. Chai
Optimization of composition of the claddings of wooden structures 31 M. Halirova, H. Sevcikova, R. Fabian, E. Machovcakova & R. Janousek
Evaluation of the ultimate strength of RC I-shaped members subjected to a combined action 37 P. Wang, Z. Huang & Q.S. Wang
Three-dimensional centrifuge and numerical modeling of pile group due to twin tunnelling in different depth 43 S.K. Ma, Y. Shao, Y. Liu, J.Y. Chen & J. Jiang
Index selection and weight analysis of the underground development of urban municipal public facilities 49 L. Ye & L.M. Zhu
Risk assessment of pipelines in operation based on AHP and application of MATLAB 55 L. Chen, G.X. Wang & J. Zhao
Effect of ground co006Editions on design parameters for bridge foundations 61 M.T.A. Chaudhary
Research on multisource information fusion of tunnel geological prediction based on evidence theory 67 Z.H. Liu, Y.T. Wang, H. Ke, H. Wu & D. Zhou
Pushover analysis of modularized prefabricated column-tree steel frame 75 Z.P. Guo, A.L. Zhang & X.C. Liu
Study on reuse of heritages of an old industrial area in Harbin Gongyijie area against the backdrop of urban renewal 83 X.Z. Shan & W. Cheng
Research on lateral resistant behavior and design of multicover plates connection for prefabricated steel plate shear wall with beam-only-connected infill plate 89 X. Zhang, A.L. Zhang & X.C. Liu
Research on sensitivity and control criteria of cable length error in a double-strut cable dome 97 C. Sun & A.L. Zhang
Structural design of a prefabricated steel frame structure with inclined braces 105 X.C. Liu, H.X. Wang & Z.P. Guo
A study on the design of an ungated community 115 F. Jia, R.X. Wang & F.L. Ma
Protection and utilization of Gaichun Garden ruins of the Summer Palace 119 D. Zhao & L. Zhang
Development of a web-based hybrid BIM cost-estimating system for fire safety engineering 125 M.-H. Wen, W.-C. Huang & Y.-W. Wu
Test and parametric analysis of postfire seismic performance of SRC column-RC beam joints 135 G.H. Li, L. Xie & D.F. Zhao
Using agent-based simulation approach for estimating the efficiency of the building project design team 139 M.H. Tsai
Field assessment of window daylighting with prismatic glazing 145 Z. Tian, D. Xue & Y.P. Lei
Mechanical analysis of rockburst considering the “locked in” stress in the driving face of the roadway 149 X.-B. Yang, X.-X. Han, H. Wang & T.-B. Zhou
Study on the identification of major safety defects in port engineering 155 J.H. Peng
Investigating the impact of greenery on the driver’s psychology at a freeway tunnel portal 159 D.Q. Xiao, Z.W. Shen & X.C. Xu
Modeling two-dimensional rubble mound breakwater using dolos at armor layer and geotube at the core layer 167 O.C. Pattipawaej & H.J. Dani
Shear stress calculation of rubber asphalt overlay and stress-absorbing layer 171 J.Z. Tan, J.G. Wei, C. Pan & K.X. Huang
Experimental study on beam-column joints of new prefabricate assembly frame structures 177 W.Z. Zhu & J.C. Zhang
Seismic analysis of large span spatial steel frame with isolation system 185 W.Z. Zhu
Effect of material ingredients on the cement-based self-leveling material 195 J. Liu, J.J. Hu, R.Q. Liu & Y.Q. Yang
Rebuilding the city parks: How great is the effectiveness of environment-friendly constructions? 201 R.Y. Tallar, A.F. Setiawan & J.P. Suen
Renaissance with recycled materials: Reconstruction of Guifeng Temple 205 Y.S. Gao & J. Xu
Research on safety management of construction projects based on game theory 209 J.X. Zhao, M.M. Wang, J.H. Sun & K. Li
Prestress distribution calculation method of a ridge tube cable dome with annular struts 215 A.L. Zhang, Y. Bai, X.C. Liu & C. Sun
A new multiple-model analysis method considering structural uncertainty 223 F.Q. Zhu
Promotion of transportation on urban spatial distribution and industrial development in Beijing 227 X. Peng
Selection of interruptive protection methods in rapid transit underground construction 233 H.-C. Yang & C.-C. Liu
Damage mechanism and dynamic analysis of tunnel lining structures under internal blast loading 239 C.Y. Chen, Y.B. Jiang, J. Yang, L.F. Zheng & Z.P. Li
The seismic responses of near-fault frame structure cluster on basin induced by the rupture of reverse fault 247 W. Zhong
Wave propagation FEA and experimental validation of aluminum plate using piezoelectric elements 253 S. Yan, S. Zhang, Z.Q. Wang, P.T. Zhao & Y. Dai
Numerical simulation on seismic behavior of subway station structure under near-fault ground motions 259 B.Z. Tang, S. Chen, X.J. Li & H.Y. Zhuang
Finite-infinite element analysis of soil dynamic response under moving load 265 C.Q. Tian & L.Q. Yuan
Evaluation of the processing suitability of rural domestic sewage treatment, taking Fangshan in Beijing as a case study 269 Y. Wang
Influence analysis of the incremental launching of steel box girder and local stability control 275 F.-J. Xie
Study on active strategies for thermal environment regulation in the zero-energy houses of Solar Decathlon, China 285 F. Shi, W. Jin, W.W. Zheng & T. Zhuang
Research and enlightening of ecological infrastructure-oriented “multiple planning integration” based on Germany’s spatial order and structure planning-illustrated by the example of Dujiangyan 289 Y.J. Li, F. Fu & Y. Yi
Homogeneous generalized yield function and limit analysis of structures with rectangular sections 295 W. Ou, L.F. Yang & W. Zhang
Numerical simulation analysis of the influence of shield tunneling on an adjacent tunnel 301 M.D. He & J. Liu
Development and validation of the effective stress algorithm of the Davidenkov constitutive model using the Byrne pore pressure increment model 309 B. Ruan, G.X. Chen & D.F. Zhao
Urban ITS framework and essential parts of the ITS frame structure 317 M.-Q. Li, Z.-H. Wang, W. Wan & Z.-T. Jing
Development and implementation of a product module division system based on the function-principle-structure 321 J. Chen, L.M. Wang & L.L. Yang
Parameter optimization of space truss and aerospace load viscoelastic damping composite structure 325 Z.W. Zhang, P. Wang & H.T. Luo
A unified theory of thermodynamically consistent microplane elastoplastic damage, and elastoplastic damage models 331 W.S. Li & J.Y. Wu
Building materials and materials science Preparation of sebacic acid by a phenol-free method 341 L. Xu, L.L. Mao, Y.M. Feng, J.C. Zhang, M. Wang, T.T. Zhao, X.J. Gao & R. Ren
Effects of electrospinning parameters on the pore structure of porous nanofibers 345 Z.Y. Sun & L. Xu
Preparation of orderly nanofibers using bubble-electrospinning 349 Z.B. Shao & L. Xu
Environmental radioactivity measure and dose estimation of 90Sr in some area 353 L. Ma, X. Ren & K. Zhang
Effect of humic acid on the adsorption of levofloxacin to goethite 357 X.P. Qin, H. Hou, L. Zhao, J. Ma, Z.J. Sun, W.J. Xue, F. Liu & G.C. Wang
Calcium and manganese affect ethanol fermentation by Pichia stipitis in cadmium-containing medium by inhibiting cadmium uptake 363 M.-T. Gao, X.X. Chen, W. Zheng, Q.Y. Xu & J.J. Hu
Performance comparison of Biological Aerated Filters packed with plolyurethane sponge and ceramic particles 367 G.L. Yu, X.J. Yan, H. Chen, C.Y. Du, Y.J. Fu & J.X. Zhang
Preparation and evaluation of the Ni-Al catalyst derived from LDHs synthesized on γ-Al2O3 support 373 X.K. Zhao, Y.Q. Li, Y. Xu, X.H. Du & J.J. Xu
Synthesis and hydrodesulfurization performance of NiMo sulfide catalysts supported on an Al-Si mixed oxide 377 Q. Yu, J.C. Zhang, J. Nan, H.B. Yu, X.F. Peng, H. Xiao, G.L. Song, S.Q. Zhang, S. Wang, Y.T. Zhang & G.H. Zhang
Study on solidification of Ningbo mucky soil 381 J.Y. Lu, R.Q. Xu, Q. Yan & X. Wang
A study on the utilization of iron and steel industrial solid waste 387 Y.B. Zhang, R. Zhu, Y. Wang, C.S. Yue & X.J. Piao
Experimental study of the drainage and consolidation characteristics of tailings discharge and accumulation by gradual height rising under the action of drainage material 393 J. Su, X.D. Ou & K.W. Hou
LQR control of across-wind responses of tall buildings using composite tuned mass dampers 403 Y.M. Kim, K.P. You, J.Y. You, S.Y. Paek & B.H. Nam
Time-dependent reliability analysis of steel fiber-reinforced concrete beams under sustained loads 411 Y. Li, K.H. Tan & S.-M. Yu
Research on the heat transfer characteristics of rock and soil under the effects of vertical double U-type buried-pipe heat exchanger 417 X.-D. Ou, X. Pan, H. Dai, Y.-C. Tang & Z.-Y. Liu
Nitrogen removal performance of ANAMMOX-PVA granules immobilized by different preparation methods 425 Y.M. Han
Seismic response of a long-span cable-stayed bridge with slip-shear metal damper 429 C.K. Jiao & X. Dong
Research on the interfacial bond behavior between CFRP sheet and steel plate under the static load 435 L. Zhang & S.-Y. Cao
Influence of thick and loose sediments on the vacuum load transfer 439 J.X. Weng
Enhancement on fireproof performance of construction coatings using calcium sulfate whiskers prepared from wastewater 447 T.-P. Tsai & H.-C. Yang
Simulation of nonlinear ultrasonic waves in anisotropic materials using convolution quadrature time-domain boundary element method 451 T. Saitoh, T. Maruyama & A. Furukawa
Study on the layout method of newly-added feeder bus lines coordinating with bus rapid transit 457 Z. Guo, P.H. Wei, X. Peng, C.Z. Chang, L. Tong & J.M. Velásquez
Design of a campus view of a virtual roaming system based on VR 465 L. Yu
Analysis on sustainable financial framework and fare adjustment strategy of China’s urban public transit 471 S. Xu, C. Li, X.L. Liu & Y.K. Du
Sanitation improvement and the bottleneck analysis of equity in China: From the perspective of specialists 479 X.L. Li & Y.Q. Miao
Ultimate capacity of uniaxially compressed perforated steel plates strengthened by using CFRPs 483 X. Tao & S.Y. Cao
Research on the measurement of the permeability coefficient of porous asphalt pavement 489 G.Q. Tang, L. Gao, T.J. Ji & J.G. Xie
Mechanical performances of icing atop cement concrete surfaces coated with emulsion wax curing agents 495 J.-L. Yao & M.-J. Qu
A study on residential area’s adaptability design for the aged in China based on open building theory 501 X. Meng & B.C. Fu
Safety management strategies for public infrastructure projects 507 C.W. Liao & T.L. Chiang
The influence of the horizontal load on the stress-strain relationship of an asphalt layer 511 Y.H. Wang, X.M. Tan, X.J. He, Y. Wang, C. Wang & T. Liu
A study on the protection type of flow-guided porthole dies with twin cavities for semi-hollow Al-profiles 517 R.R. Deng & P. Yun
A study on covering and protection type porthole dies for semi-hollow Al-profiles 521 R.R. Deng & P. Yun
A study on protection type porthole dies of semi-hollow Al-profiles with four cavities 525 R.R. Deng & P. Yun
Numerical and experimental study on stability of aluminium alloy riveted and stiffened panels under in-plane shear 531 D.W. Wang, Z.K. Lei, R.X. Bai & Y. Ma
Process optimization for the new nano-complex internal coating and its anti-corrosion and drag reduction properties in natural gas pipes 535 B.H. Hao, B. Sun, Z.H. Liu, Y.L. Han & L.F. Zhao
An improved gray wolf optimization algorithm and its application in iron removal from zinc sulfate solution using goethite 539 T.B. Wu, J.H. Liu, Y.L. Liu, Q.M. Zhao & X.J. Li
Determination of multi-element in abstergent by ICP-MS with microwave digestion 545 B.L. Wu, Z.X. Wang, J.M. Ye, Z.X. Lin, H. Wang & C. Luo
Fabrication and application of superhydrophobic-superoleophilic porous Cu sponge 549 Y.J. Xing, Z.J. Han, J.L. Song, J. Sun, J. Luo, Z.A. Liu, J.Y. Liu, L. Huang & X. Liu
Preparation of porous ceramics using CaCO3 as the foaming agent 555 J. Li & Y.L. Chen
Spacing optimization modeling and simulation of thermo-optic VOA gold thin film interconnect 559 S.T. Ding, L. Xu, F. Huang & M.L. Gong
Growth and characterization of thick Ge epilayers on Si and Silicon-on-Insulator (SOI) substrates with low temperature Ge buffers 565 Z.W. Zhou
Effect of ZnSO4 and SnSO4 additions on the morphological of α-Al2O3 flakes for pearlescent pigment 569 H. Qin, L. Wang & Y. Xiong
A facile cost-effective method for preparing superhydrophobic carbon black coating on Al substrate 573 P. Wang, B. Sun, T. Yao, X. Fan, C. Wang, C. Niu, H. Han & Y. Shi
Preparation of multifunctional flake alumina ceramics 577 Q.R. Wang, C. Liu, K.X. Du & Y. Xiong
Study on the deformation of plastic films by virtual particle method 581 X.H. Yang, Z. Yang, Y.X. Wang, C.Y. Lv & X. Cheng
An experimental study of installing-holes distances parameter optimization for metallic inserts bonded into CFRP laminates 585 J. Liu, H. Zhang & K. Hou
Formation and test methods of the thermo-residual stresses for thermoplastic polymer matrix composites 589 C.C. Wang, G.Q. Yue, J.Z. Zhang, J.G. Liu & J. Li
Effects of lithium slag from lepidolite on Portland cement concrete 593 Q. Luo, Y.F. Wen, S.W. Huang, W.L. Peng, J.Y. Li & Y.X. Zhou
Sorption properties of TEMPO-oxidized natural cellulose to iron ions 597 C.Z. Geng, Y.H. Lou, D.Y. Yan, Z.H. Zhao, Z.X. Xue & Y.Z. Xia
Research on the precision of grinding experiments in an iron ore 603 G.M. Shi, L.P. Jiang, J.M. Zhao, R.Q. Zhao, Y.C. Zhou & S.C. He
Construction equipment and mechanical science An experimental study on the dynamic characteristics of compact transmission lines bundles following ice shedding 609 K.P. Ji, B. Liu, X.P. Zhan, X.Z. Fei, C. Deng & L. Liu
A single-lens optimal imaging system based on a liquid crystal spatial light modulator and micro-scanning optical wedge 613 N. Xu, Z.-Y. Liu & D. Pu
A geometry-based path optimization approach for motion control of the NC grinding machine 621 F. Zhang, J. Gong, Y.J. Liu, W. Xia, M.F. Huang & Y.F. Fu
A study on carbon electrode-based photoelectrochemical-type self-powered high-performance UV detectors 625 Q. Meng, X. Fan, E.Q. Wu & L. Chu
A scheme study of CFB power generation by using pet coke 629 H.T. Liu, L. Xue & D.F. Xu
Design of the pilot-scale double effect evaporator for high-concentration sodium hydroxide production 633 L. Gao
Early fault diagnosis of wind turbine gearboxes based on the DSmT 641 Z.Q. Liu & G.C. Chen
A study of an improved method for horizontal alignment based on the line element 647 Y.H. Li, Y.J. Liu & Y.L. Li
Theoretical analysis of mechanical properties and mechanical design for fabricated zero initial cable force friction dissipation 651 Q.X. Ye & A.L. Zhang
An optimal allocation model of residual control rights in the hydraulic PPP project 659 Y.H. Zhang, J.C. Feng, S. Xue & K. Zhang
A study on the optimized hydraulic circulation system of the artificial lake 665 Q.N. Jin, A.J. You & H.B. Xu
Development of new elastic constant estimation method using laser ultrasonic visualization testing 669 T. Saitoh & A. Mori
Selection for the frequency control point of the VAV air supply system in large underground spaces 675 K.D. Xue, Z.H. Zhou, Y.F. Zhang & Y.M. Sun
The innovations of the ship lock design for the Tugutang Hydropower Station in the Xiangjiang river 679 H.Y. Liu & C.Y. Wang
Knowledge management in construction-the framework of high value density knowledge discovery with graph database 685 Y. Jing, Y.-C. Wang & Z. Wang
Research of cold region green hospital design specification and practice 689 Y.Z. Gao, H.Y. Mei & J.F. Dong
Development of intelligent residual current devices based on the PIC micro-controller 693 H. Chen, J. Xiang, R. Huang, L.M. Shen, F.S. Chen, K. Li, W.N. Wang, L.M. Bu, X. He & X.Y. Xu
Design of Control Moment Gyro equivalent sound source based on transfer function matrix inversion 699 W. Cheng, W.-Q. Sun, G.-Y. Wang, J.-P. Chen, X.-F. Li & J. Jia
A study of the magnetic field distribution with saddle-shaped coil of the electromagnetic flow meter 707 H. Jia, Y.M. Wang, W.T. Li & Y.Y. Zhang
A study on a localizable CMOS temperature sensor based on wireless transmission 713 L.Y. Chen, J.Q. Li & Y.X. Li
Finite element analysis of the roller coaster wheel bridge based on virtual prototype technology 719 Y.M. Wang, J. Ye, X.T. Xu & S. Song
Multi-axis coordination control based on siemens S7-CPU315T 725 C.H. Pan, Y.L. Li & M.W. Qin
Short-term photovoltaic power forecasting based on the human body amenity and least squares support vector machine with fruit fly optimization algorithm 729 H.B. Chen, W. Han & L. Chen
An RFID-enabled CEP model for cloud manufacturing shopfloor 735 K.Q. Chen, Y.Y. Qiu, M.L. Wang, Q.Y. Dai, R.Y. Zhong & C.M. Huang
Optimization of extraction of polysaccharides from mulberries by using high-intensity Pulsed Electric Fields 741 S.L. Jin
Stress analysis of the interference fit in helical gear transmission 747 T. Zhao
A review of transformerless DC-DC boost converters for renewable energy sources 753 J. Luo
The linear fatigue cumulative damage analysis of the welding seam 759 Y.Y. Wang
Application of wavelet analysis and resonance demodulation in mechanical fault diagnosis 765 C.H. Shen & W. Wang
A study on the modeling of the slider-crank mechanism based on parameter identification 769 X.J. Wang, X.H. Tang & J. Shen
Angle measurement by comparing the amplitude technique of the sum-difference pattern radiometer 775 H. Wang, J. Xiao & B. Bi
Tension control methodology of active continuous discharge and intermittent reciprocating work based on master-slave synchronous motion 781 L. Han, H. Hu, W.H. Ding & J.Y. Li
Design and kinematics analysis of a novel liquid-brewing steamer feeding robot 787 J.S. Zhang, B. Li, T.C. Zhang & X.H. Zhao
Design and simulation analysis of a new type of multi-gear pump 793 X.H. Zhang, P.Y. Liu, W.J. Wei, H.T. Li & G.P. Tian
A study on the torsional fatigue fracture location of steel wires 799 W.J. Wei, D.C. Wang, P. Cheng & C.X. Shao
The lightweight design of the support arm 805 Y.Q. Tian, D. Meng & X.Y. Lin
An analysis of the thermal elastohydrodynamic lubrication performance of the slope of the thrust bearing 809 Y.L. Liu, Y.H. Li, T.Y. Niu, J.F. Huang & Y.X. Wang
Simulation of submarine underwater motion with an external weapon module 815 Y.Q. Lian, C.L. Li & Y. Liu
A multi-objective NC drilling parameter optimization model to achieve low energy consumption and costs 823 W. Yan, H. Zhang & Z.G. Jiang
An experimental study of the dynamic equivalence leakage of rolling-piston compressors 827 K.H. Geng, W. Wei, X.B. Ma, X. Wang, X.G. Han, T.B. Zhao, C.L. Chen & H. Sun
The structure and transmission efficiency analysis research of a new pattern F2C-T pin-cycloid planetary transmission 833 L. Xuan, H. Jiang & T.M. Guan
A study on surface zinc plating and heat treatment of welding gears 839 R. Zeng, J.H. Luo, Z.R. Lin & L.L. Wang
Development and application of a test platform for a battery management system 843 J. Xiong, Z.H. Jin & Z.C. Li
Experimental study on yarn friction slip in the yarn pull-out test 847 W.K. Li, Z.K. Lei, F.Y. Qin, R.X. Ba & Q.C. Fang
Analysis and research into the effect of dithering technology on ADC’s SNR 851 K.K. Jin & X.L. Chen
Design and implementation of a CANopen master stack for servomotor controllers in a 6-DoF manipulator 855 J.H. Ji, Z.H. Tao, T. Zhang & M.Z. Qi
Design of a crane intelligent control system 861 C.C. Zhang, S.G. Liu & H.W. Xie
Valve clearance fault diagnosis of an internal combustion engine based on wavelet packets and k-nearest neighbors 865 R. Tan, Y. Zhang, T.X. Zheng, B. Yang & Y.J. Wang
RV reducer dynamic and static performance test system design 871 W.-B. Fu, C.-S. Ai, C.-L. Tang, Y.-S. Yang, G.-P. Li & H.-H. Zhao
Analysis of automotive suspension compliance based on the main effects of rubber bushing 877 B. Chen, J.-H. Fu & Z.-M. Chen
Experimental and simulation research on the friction and wear properties of surface textured friction pairs in CST 883 S.N. Sun, L.Y. Xie & R.S. Long
Simulation and analysis of MPPT used in photovoltaic grid-connected systems based on the improved disturb-and-observe method 889 J.F. Wang & H.R. Zhao
Automatic control loop optimization method of thermal power plant based on internal model control 895 S. Gao, X.K. Pang, J. Li, C.W. Li & H.D. Li
Multidisciplinary optimization and parameter analysis of the in-wheel permanent magnet synchronous motor of a tram 899 X.C. Wang & Z.G. Lu
Dynamic simulation and muzzle vibration analysis of vehicle-mounted automatic mortar 907 Y. Fang, J.-Q. Qin & C.-C. Di
Numerical simulation of aspheric glass lens during the non-isothermal molding process 911 H.J. Duan, Z.L. Xiao & J.Y. Tao
Temperature field analysis of a porous modified concrete composite pavement 915 Y.H. Wang, X.M. Tan, X.J. He, T. Liu, Y. Wang & C. Wang
A retrieval method based on a CBR finite element template 921 Q.Y. Ma, D.P. Xie, L.H. Song & M.J. Zhou
Improved reduction of graphene oxide through femtosecond laser pulse trains 927 R.Y. Yan, P. Zuo & X.J. Li
A nanoparticle-decorated silicon substrate for SERS via circularly polarized laser one-step irradiation 931 G. Meng, P. Ran & Y.D. Xu
An experimental study on rotation ultrasound-assisted drilling for high-strength engineering of mechanical connection components 935 S. Hong
Synthesis of PbO nanosheet-based thin films for all-solid-state supercapacitors 939 J. Zhang, H.Y. Xie & Z.J. Chen
A large-scale SERS substrate fabricated by using femtosecond laser with superhydrophobicity 945 Y.D. Xu, G. Meng & P. Ran
A study on the ship model resistance test and numerical simulation 949 H.C. Pan, S.N. Yu & Y.J. Yang
Magnetic memory testing signal analysis of Q345 steel welding parts under the static tension condition 955 M. Lou, X.-H. Lv, F. Lu & B. Li
Research on reliability assessment of success or failure product based on small sample 959 H.-P. Li, Z.-L. Xuan & Y.-D. Wang
Numerical simulation of hydroforming of a stainless steel sink 965 Q.H. Li, P. Zhu, X.Q. Guo, J.W. Hou & X.M. Li
The fabrication and measurement of a bi-axial thermal convection acceleration sensor 971 H. Wang, Y.G. Li, P. Yan, Y. Huang & S. Sugiyama
Innovative green design of the frog ramming machine based on TRIZ/FRT 975 Z.G. Xu, J.L. Li & Z.Y. Zhu
Rotor fault diagnosis based on SVM and improved D-S theory 979 Z.-H. Yan & P. Liao
A study of the relationship between pre-tightening force and torque in precision instrument assembly 985 S. Huang, X. Jin, Z.F. Wang, Z.J. Zhang, M.Z. Xiao & C. Cui
Thermal characteristic analysis of a hollow screw based on the fluid structure thermal coupling 991 X.S. Li, W. Xiong & J.N. Xu
Research on intelligent exhaust device design of the breaker in the substation 995 X. Yu & W. Wang
An improved calibration method for a nondestructive testing system based on infrared thermopile sensors 999 W. He, T. Zhou, B. Jiang, Y. Wan & Y. Su
Evaluation of wind turbine power generation performance based on a multiple distribution model 1005 S.Q. Guo, J.R. Yang & H. Li
Research on the acoustic emission testing of the tank truck and on the defect acoustic emission source location method 1011 Z.W. Ling, M.L. Zheng, D. Bin & X.L. Guo
Nonlinear dynamic analysis of a cantilever plate for generating electricity based on electromagnetic induction 1015 J.H. Yang, K. Ye, G. Zhu & H. Guo
Influence of inductance on an interleaved parallel boost PFC circuit 1021 Z.H. Kong, L.G. Wu & Z.F. Luo
Author index 1025
