ABSTRACT
This article describes concepts of three features of microstructure–properties relationship, first the imaging and formation of nano-particles, then their contribution to hardness, and finally hydrogen embrittlement during fatigue. First, we briefly review the imaging modes in transmission electron microscopy (TEM) for nano-sized precipitates. The next issue is the hardening in Aluminum alloys, which is caused by GP-zones or precipitates, formed at the second step of the annealing process. After homogenization, the peak-hardness can be generally achieved by a few hours of annealing between 120°C and 200°C. Hardness measurements and equal-channel axial pressing (ECAP) showed that even at room temperature the driving force for formation of the particles is so strong that already within one hour of annealing after homogenization a remarkable hardening occurs. The third issue, hydrogen embrittlement, is caused by oxidation of pure Al surfaces produced at the crack tip during fatigue under ambient or wet moisture conditions. The cracks propagate preferentially along the precipitation free zone adjacent to grain boundaries, where hydrogen diffusion is fastest.
