Breadcrumbs Section. Click here to navigate to respective pages.
Chapter
Chapter
Main Characteristics of an Aquifer The main function of the aquifer is to provide underground storage for the retention and release of gravitational water. Aquifers can be characterized by indices that reflect their ability to recover moisture held in pores in the earth (only the large pores give up their water easily). These indices are related to the volume of exploitable water. Other aquifer characteristics include: • Effective porosity corresponds to the ratio of the volume of “gravitational” water at saturation, which is released under the effect of gravity, to the total volume of the medium containing this water. It generally varies between 0.1% and 30%. Effective porosity is a parameter determined in the laboratory or in the field. • Storage coefficient is the ratio of the water volume released or stored, per unit of area of the aquifer, to the corresponding variations in hydraulic head 'h. The storage coefficient is used to characterize the volume of useable water more precisely, and governs the storage of gravitational water in the reservoir voids. This coefficient is extremely low for confined groundwater; in fact, it represents the degree of the water compression. • Hydraulic conductivity at saturation relates to Darcy’s law and characterizes the effect of resistance to flow due to friction forces. These forces are a function of the characteristics of the soil matrix, and of the fluid viscosity. It is determined in the laboratory or directly in the field by a pumping test. • Transmissivity is the discharge of water that flows from an aquifer per unit width under the effect of a unit of hydraulic gradient. It is equal to the product of the saturation hydraulic conductivity and of the thickness (height) of the groundwater. • Diffusivity characterizes the speed of the aquifer response to a disturbance: (variations in the water level of a river or the groundwater, pumping). It is expressed by the ratio between the transmissivity and the storage coefficient. Effective and Fictitious Flow Velocity: Groundwater Discharge As we saw earlier in this chapter, water flow through permeable layers in saturated zones is governed by Darcy’s Law. The flow velocity is in reality the fictitious velocity of the water flowing through the total flow section. Bearing in mind that a section is not necessarily representative of the entire soil mass, Figure 7.7 illustrates how flow does not follow a straight path through a section; in fact, the water flows much more rapidly through the available pathways (the tortuosity effect). The groundwater discharge Q is the volume of water per unit of time that flows through a cross-section of aquifer under the effect of a given hydraulic gradient. The discharge of a groundwater aquifer through a specified soil section can be expressed by the equation:
DOI link for Main Characteristics of an Aquifer The main function of the aquifer is to provide underground storage for the retention and release of gravitational water. Aquifers can be characterized by indices that reflect their ability to recover moisture held in pores in the earth (only the large pores give up their water easily). These indices are related to the volume of exploitable water. Other aquifer characteristics include: • Effective porosity corresponds to the ratio of the volume of “gravitational” water at saturation, which is released under the effect of gravity, to the total volume of the medium containing this water. It generally varies between 0.1% and 30%. Effective porosity is a parameter determined in the laboratory or in the field. • Storage coefficient is the ratio of the water volume released or stored, per unit of area of the aquifer, to the corresponding variations in hydraulic head 'h. The storage coefficient is used to characterize the volume of useable water more precisely, and governs the storage of gravitational water in the reservoir voids. This coefficient is extremely low for confined groundwater; in fact, it represents the degree of the water compression. • Hydraulic conductivity at saturation relates to Darcy’s law and characterizes the effect of resistance to flow due to friction forces. These forces are a function of the characteristics of the soil matrix, and of the fluid viscosity. It is determined in the laboratory or directly in the field by a pumping test. • Transmissivity is the discharge of water that flows from an aquifer per unit width under the effect of a unit of hydraulic gradient. It is equal to the product of the saturation hydraulic conductivity and of the thickness (height) of the groundwater. • Diffusivity characterizes the speed of the aquifer response to a disturbance: (variations in the water level of a river or the groundwater, pumping). It is expressed by the ratio between the transmissivity and the storage coefficient. Effective and Fictitious Flow Velocity: Groundwater Discharge As we saw earlier in this chapter, water flow through permeable layers in saturated zones is governed by Darcy’s Law. The flow velocity is in reality the fictitious velocity of the water flowing through the total flow section. Bearing in mind that a section is not necessarily representative of the entire soil mass, Figure 7.7 illustrates how flow does not follow a straight path through a section; in fact, the water flows much more rapidly through the available pathways (the tortuosity effect). The groundwater discharge Q is the volume of water per unit of time that flows through a cross-section of aquifer under the effect of a given hydraulic gradient. The discharge of a groundwater aquifer through a specified soil section can be expressed by the equation:
Main Characteristics of an Aquifer The main function of the aquifer is to provide underground storage for the retention and release of gravitational water. Aquifers can be characterized by indices that reflect their ability to recover moisture held in pores in the earth (only the large pores give up their water easily). These indices are related to the volume of exploitable water. Other aquifer characteristics include: • Effective porosity corresponds to the ratio of the volume of “gravitational” water at saturation, which is released under the effect of gravity, to the total volume of the medium containing this water. It generally varies between 0.1% and 30%. Effective porosity is a parameter determined in the laboratory or in the field. • Storage coefficient is the ratio of the water volume released or stored, per unit of area of the aquifer, to the corresponding variations in hydraulic head 'h. The storage coefficient is used to characterize the volume of useable water more precisely, and governs the storage of gravitational water in the reservoir voids. This coefficient is extremely low for confined groundwater; in fact, it represents the degree of the water compression. • Hydraulic conductivity at saturation relates to Darcy’s law and characterizes the effect of resistance to flow due to friction forces. These forces are a function of the characteristics of the soil matrix, and of the fluid viscosity. It is determined in the laboratory or directly in the field by a pumping test. • Transmissivity is the discharge of water that flows from an aquifer per unit width under the effect of a unit of hydraulic gradient. It is equal to the product of the saturation hydraulic conductivity and of the thickness (height) of the groundwater. • Diffusivity characterizes the speed of the aquifer response to a disturbance: (variations in the water level of a river or the groundwater, pumping). It is expressed by the ratio between the transmissivity and the storage coefficient. Effective and Fictitious Flow Velocity: Groundwater Discharge As we saw earlier in this chapter, water flow through permeable layers in saturated zones is governed by Darcy’s Law. The flow velocity is in reality the fictitious velocity of the water flowing through the total flow section. Bearing in mind that a section is not necessarily representative of the entire soil mass, Figure 7.7 illustrates how flow does not follow a straight path through a section; in fact, the water flows much more rapidly through the available pathways (the tortuosity effect). The groundwater discharge Q is the volume of water per unit of time that flows through a cross-section of aquifer under the effect of a given hydraulic gradient. The discharge of a groundwater aquifer through a specified soil section can be expressed by the equation:
ABSTRACT
Effective flow Fictitious flow
Fig. 7.7 : Real and fictitious groundwater discharge.