Painting gang 1 ganger (skill rate 3)

11.90

3 painters (skill rate 3)

34.20

1 unskilled operative (general)

9.52

Total Gang Rate/Hour

£ 55.62

RESOURCESPLANT

Painting 1.5KVA diesel generator

1.93

transformers/cables; junction box

0.20

4.5″ electric grinder 0.31 transit van −50% of time

3.34

ladders 1.17 Total Rate/Hour £ 6.95 LEAD BASED PRIMER PAINT

One coat calcium plumbate primer Metal

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.03 1.39 0.17 0.45 m22.01

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.03 1.39 0.17 0.45 m22.01

surfaces inclined at an angle exceeding

0.03 1.39 0.17 0.45 m22.01

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.03 1.67 0.21 0.45 m22.33

surfaces of width ne 300 mm

0.01 0.56 0.07 0.14 m 0.76

surfaces of width 300 mm-1 m

0.03 1.39 0.17 0.29 m 1.86

Metal sections 0.03 1.67 0.20 0.45 m22.32 Pipework 0.03 1.67 0.20 0.45 m22.32 IRON BASED PRIMER PAINT

One coat iron oxide primer

Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.03 1.39 0.17 0.43 m21.99

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.03 1.39 0.17 0.43 m21.99

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.03 1.39 0.17 0.43 m21.99

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.03 1.67 0.21 0.43 m22.31

surfaces of width ne 300 mm

0.01 0.56 0.07 0.13 m 0.76

surfaces of width 300 mm-1 m

0.03 1.39 0.17 0.29 m 1.85

Metal sections 0.03 1.67 0.20 0.43 m22.30 Pipework 0.03 1.67 0.20 0.43 m22.30

ACRYLIC PRIMER

acrylic wood primer

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.02 1.11 0.14 0.26 m21.51

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.02 1.11 0.14 0.26 m21.51

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.02 1.11 0.14 0.26 m21.51

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.03 1.39 0.17 0.26 m21.83

surfaces of width ne 300 mm

0.01 0.56 0.06 0.08 m 0.70

surfaces of width 300 mm-1 m

0.03 1.39 0.17 0.17 m 1.73

GLOSS PAINT

One coat calcium plumbate primer; one undercoat and one finishing coat of gloss paint

Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.89 0.49 0.84 m25.23

angle 30-60 degrees to the horizontal

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.45 0.56 0.84 m25.85

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.09 4.73 0.59 0.84 m26.16

surfaces of width ne 300 mm

0.03 1.39 0.17 0.25 m 1.81

surfaces of width 300 mm-1 m

0.05 2.78 0.35 0.55 m 3.68

Metal sections 0.09 5.01 0.60 0.84 m26.45 Pipework 0.09 5.01 0.60 0.84 m26.45 One coat acrylic wood primer; one undercoat and one finishing coat of gloss paint

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.62 0.41 0.65 m24.68

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.89 0.49 0.65 m25.04

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.17 0.52 0.66 m25.35

surfaces inclined at an angle ne 60 degrees to the horizontal

surfaces of width ne 300 mm

0.03 1.39 0.11 0.20 m 1.70

surfaces of width 300 mm-1 m

0.05 2.78 0.35 0.42 m 3.56

One coat calcium plumbate primer; two undercoats and one finishing coat of gloss paint

Metal upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.06 3.34 0.42 1.03 m24.79

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.62 0.45 1.03 m25.10

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.07 3.89 0.49 1.03 m25.42

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the

0.08 4.17 0.52 1.01 m25.70

width ne 300 mm

surfaces of width 300 mm-1 m

0.06 3.34 0.42 0.67 m 4.42

One coat acrylic wood primer; two undercoats and one finishing coat of gloss paint

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.62 0.45 0.84 m24.91

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.89 0.49 0.84 m25.23

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.17 0.52 0.85 m25.54

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.08 4.45 0.52 0.84 m25.81

surfaces of width ne 300 mm

0.03 1.67 0.49 0.25 m 2.41

surfaces of width 300 mm-1 m

0.06 3.34 0.42 0.55 m 4.30

One coat alkali resisting primer; two undercoats and one finishing coat

concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.04 1.95 0.25 0.85 m23.04

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.04 2.22 0.28 0.85 m23.35

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.05 2.50 0.31 0.85 m23.67

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.05 2.78 0.35 0.85 m23.98

surfaces of width ne 300 mm

0.02 0.83 0.11 0.25 m 1.19

surfaces of width 300 mm-1 m

0.03 1.67 0.21 0.55 m 2.43

Brickwork and rough concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.04 2.22 0.28 0.86 m23.36

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.05 2.50 0.31 0.87 m23.68

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.05 2.78 0.35 0.89 m24.02

surfaces inclined at an angle ne 60 degrees to the horizontal

surfaces of width ne 300 mm

0.02 1.11 0.14 0.27 m 1.52

surfaces of width 300 mm-1 m

0.04 1.95 0.25 0.57 m 2.76

Blockwork upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.06 3.06 0.38 0.89 m24.33

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.06 3.34 0.42 0.89 m24.64

surfaces of width ne 300 mm

0.03 1.39 0.17 0.27 m 1.83

surfaces of width 300 mm1 m

0.04 2.22 0.28 0.58 m 3.08

Two coats anticondensation paint; PC £44.03/5L

Metal upper surfaces inclined at an angle ne 30 degrees to the

0.08 4.17 0.52 2.71 m27.40

inclined at an angle 30-60 degrees to the horizontal

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.17 0.52 2.71 m27.40

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.08 4.45 0.56 2.71 m27.71

surfaces of width ne 300 mm

0.03 1.67 0.21 0.81 m 2.69

surfaces of width 300 mm1 m

0.05 2.78 0.35 1.76 m 4.89

Metal sections 0.09 5.01 0.63 2.71 m28.34 EMULSION PAINT

One thinned coat, two coats vinyl emulsion paint; PC £20.75/5L

Smooth concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.62 0.45 0.56 m24.63

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.89 0.49 0.56 m24.95

surfaces inclined at an angle exceeding 60 degrees to the

0.08 4.17 0.52 0.56 m25.26

and lower surfaces inclined at an angle ne 60 degrees to the horizontal

surfaces of width ne 300 mm

0.03 1.67 0.21 0.17 m 2.05

surfaces of width 300 mm1 m

0.07 3.89 0.49 0.37 m 4.75

Brickwork and rough concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.08 4.17 0.52 0.58 m25.27

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.08 4.45 0.56 0.58 m25.59

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.09 4.73 0.59 0.58 m25.90

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.09 5.01 0.63 0.58 m26.21

surfaces of width ne 300 mm

0.03 1.67 0.21 0.17 m 2.05

surfaces of width 300 mm1 m

0.08 4.45 0.56 0.40 m 5.40

Blockwork surfaces inclined at an angle exceeding 60

0.09 5.01 0.63 0.59 m26.23

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.10 5.56 0.70 0.59 m26.85

surfaces of width ne 300 mm

0.04 2.22 0.28 0.18 m 2.68

surfaces of width 300 mm1 m

0.08 4.45 0.56 0.39 m 5.39

CEMENT PAINT

Two coats masonry paint; PC £18.99/5L Smooth concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.62 0.45 0.39 m24.45

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.89 0.49 0.39 m24.77

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.17 0.52 0.39 m25.08

soffit surfaces and lower surfaces inclined at an angle ne 60

0.08 4.45 0.56 0.39 m25.40

surfaces of width ne 300 mm

0.03 1.67 0.21 0.12 m 2.00

surfaces of width 300 mm-1 m

0.07 3.89 0.49 0.25 m 4.64

Brickwork and rough concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.08 4.17 0.52 0.45 m25.14

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.08 4.45 0.56 0.45 m25.45

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.09 4.73 0.59 0.45 m25.77

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.09 5.01 0.63 0.45 m26.08

surfaces of width ne 300 mm

0.03 1.67 0.21 0.13 m 2.02

surfaces of width 300 mm-1 m

0.08 4.45 0.56 0.29 m 5.30

Blockwork surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.09 5.01 0.63 0.58 m26.22

soffit surfaces and lower surfaces inclined at an

0.10 5.56 0.70 0.58 m26.84

horizontal surfaces of width ne 300 mm

0.04 2.22 0.28 0.18 m 2.68

surfaces of width 300 mm-1 m

0.08 4.45 0.56 0.38 m 5.39

One thinned coat, two coats concrete floor paint; PC £20.99/5L

Smooth concrete

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.07 3.62 0.45 1.61 m25.68

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.89 0.49 1.61 m26.00

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.08 4.17 0.52 1.61 m26.31

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.08 4.45 0.56 1.20 m26.20

surfaces of width ne 300 mm

0.03 1.67 0.21 0.50 m 2.38

surfaces of width 300 mm-1 m

0.07 3.89 0.49 1.05 m 5.43

Additional coats

width exceeding 1 m

0.03 1.67 0.21 0.65 m22.53

surfaces of 0.01 0.56 0.07 0.19 m 0.82

surfaces of width 300 mm-1 m

0.02 0.83 0.17 0.42 m 1.43

EPOXY OR POLYURETHANE PAINT Blast clean to BS 7079; one coat zinc chromate etch primer, two coats zinc phosphate CR/ alkyd undercoat off site; one coat MIO CR undercoat and one coat CR finish on site

Metal sections – – – – m221.47 Blast clean to BS 7079; one coat zinc rich 2 pack primer, one coat MIO high build epoxy 2 pack paint off site; one coat polyurethane 2 pack undercoat and one coat polyurethane 2 pack finish on site

Metal sections – – – – m223.27 Two coats clear polyurethane varnish; PC £25.85/5L

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.04 2.22 0.28 0.63 m23.13

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.05 2.50 0.31 0.63 m23.44

60 degrees to the horizontal

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.06 3.34 0.42 0.63 m24.38

surfaces of width ne 300 mm

0.03 1.39 0.17 0.19 m 1.75

surfaces of width 300 mm-1 m

0.05 2.78 0.35 0.41 m 3.54

Two coats colour stained polyurethane varnish PC £37.89/5L

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.04 2.22 0.28 0.69 m23.20

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.05 2.50 0.31 0.69 m23.51

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.05 2.78 0.35 0.69 m23.83

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.06 3.34 0.42 0.69 m24.45

surfaces of width ne 300 mm

0.03 1.39 0.17 0.21 m 1.77

surfaces of width 300 mm-1 m

0.05 2.78 0.35 0.45 m 3.58

Three coats colour stained polyurethane varnish; PC £37.89/5L Timber

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.06 3.06 0.38 1.04 m24.48

30-60 degrees to the horizontal

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.07 3.89 0.49 1.04 m25.42

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.09 4.73 0.59 1.04 m26.36

surfaces of width ne 300 mm

0.04 1.95 0.25 0.31 m 2.50

surfaces of width 300 mm-1 m

0.07 3.89 0.49 0.68 m 5.06

One coat hardwood stain basecoat; PC £224.50 /25L and two coats hardwood woodstain; PC £41.75/5L Timber

upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.06 3.34 0.42 1.25 m25.00

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.07 3.62 0.45 1.25 m25.31

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.07 3.89 0.49 1.25 m25.63

soffit surfaces and lower surfaces

0.08 4.45 0.56 1.34 m26.34

degrees to the horizontal surfaces of width ne 300 mm

0.04 1.95 0.25 0.37 m 2.57

surfaces of width 300 mm1 m

0.07 3.89 0.49 0.81 m 5.19

BITUMINOUS OR COAL TAR PAINT

Two coats golden brown creosote wood preservative; PC £14.95/25L

Timber upper surfaces inclined at an angle ne 30 degrees to the horizontal

0.05 2.50 0.31 0.06 m22.88

upper surfaces inclined at an angle 30-60 degrees to the horizontal

0.05 2.78 0.35 0.06 m23.20

surfaces inclined at an angle exceeding 60 degrees to the horizontal

0.06 3.06 0.38 0.06 m23.51

soffit surfaces and lower surfaces inclined at an angle ne 60 degrees to the horizontal

0.07 3.62 0.45 0.06 m24.13

surfaces of width ne 300 mm

0.03 1.67 0.21 0.02 m 1.90

surfaces of width 300 mm1 m

0.06 3.06 0.38 0.04 m 3.48

Two coats bituminous paint; PC

Pipework 0.09 5.01 0.66 0.17 m25.84