ABSTRACT
Example 2 – the pipe and flange 1 Open the pipe/flange model created in chapter 33 with MVLAY1 tab, UCS BASE, layer
MODEL, lower left viewport active and refer to Fig. 39.2
2 In the top left viewport, activate the PROFILE command and: a) pick the model then right-click b) enter Y <R> to the three prompts c) activate the Layer Properties Manager dialogue box and:
1. load the HIDDEN linetype and set to the new PH layer 2. freeze layer MODEL in the current viewport
3 Repeat step 2 in the top right and lower right viewports, but do not load the HIDDEN linetype – it is already loaded?
